I added a 35cm Kuryaka barrel and DZP BCAR to my Torrent and it hits harder and is much more accurate. Thanks for the tip with the mag release spring, I'll do that the next time I'm in the blaster.
@@RevBDes It might be a little long but it was what I had on hand, I needed some extra length to give the BCAR something to attach to. I could take 5cm off but then I could ruin the barrel and Kuryaka does such nice work.
I was able to get mine working pretty well. Adding the second oring to the plunger tube/pusher space really helped. (Weird they only use one) I haven’t found a spring I like yet so I haven’t bothered extending the barrel. Seems pointless. A retaliator spring from OOD works but is a bit too short so I’m gonna print a spacer and try that. There’s a crazy mix of awesome and terrible design features in this thing but the plunger tube and spring guide is actually pretty genius for a compact blaster!
What do you mean "For that price"... at 30$ this is one of the cheapest blaster out there. I mean, I update blaster that are much more expensive. At that price, it's the level of mod I expected it to be.
I returned mine. I did all this already. Nothing to gain. Longshot or aeon pro x for the win. It’s too much stress opening over and over. No skinny pusher and the plunger tube inner diameter is wider at the back end. The clunky prime is just awful. I think retaliator springs work maybe a 12 kg will boost to 180. Highest I got was 170 same darts as u. Also in time the pusher o ring gets worn from mag lips. Hope u didn’t hurt urself too bad.
@@bboychips Just a bruise XD. TBH, I don't hate it, mine works well and I think I can bring it to a higher "standard". Everything is super easy to open, shell is pretty rigid and the only few glued parts are very easy to separate. Fingers crossed they'll release another Pro springer soon that won't be worse! I like to make something good with crappy blaster, this one is a "freebie"...not much work
![[REVIEW] Nerf Pro Torrent (Is Nerf's First Pro Springer Any Good?)](http://i.ytimg.com/vi/d021nnWY1cg/mqdefault.jpg)
I added a 35cm Kuryaka barrel and DZP BCAR to my Torrent and it hits harder and is much more accurate. Thanks for the tip with the mag release spring, I'll do that the next time I'm in the blaster.
You're Welcome! It just occurred to me while modding it...and the spring is included XD
Next taG nerf upgrade double spring tree
@@riyadijoko9897 Nah, I won't run double spring on a blaster I use. But I will eventually find an upgrade spring with the right spec
Isn't 35cm a bit long for a plunger of this size?
@@RevBDes It might be a little long but it was what I had on hand, I needed some extra length to give the BCAR something to attach to. I could take 5cm off but then I could ruin the barrel and Kuryaka does such nice work.
I was able to get mine working pretty well. Adding the second oring to the plunger tube/pusher space really helped. (Weird they only use one)
I haven’t found a spring I like yet so I haven’t bothered extending the barrel. Seems pointless.
A retaliator spring from OOD works but is a bit too short so I’m gonna print a spacer and try that.
There’s a crazy mix of awesome and terrible design features in this thing but the plunger tube and spring guide is actually pretty genius for a compact blaster!
The goal here was not to extend the barrel, but to remove the plastic one. It seals better with aluminum
Where were did you get yours? Locally? They don't seem to be available yet in Canada.
Got mine through Milo's mod...but it's available on Amazon.com with some shipping
Looks like there is hope for the torrent after all. Thank you for the video! Take care
You're Welcome my friend!
Good work sir.
thanks a bunch!!
Try a thunderhawk bolt if you can get ahold of one. It is chunkier than a longshot bolt.
But the thing would really to be stabilized in some way...I'll stick with the pump
Do the Sender next, as that also seems to be wildly inconsistent
For that price, you shouldn't have to fix anything. Nerf Hasbro has always had overpriced crap
What do you mean "For that price"... at 30$ this is one of the cheapest blaster out there. I mean, I update blaster that are much more expensive. At that price, it's the level of mod I expected it to be.
I returned mine. I did all this already. Nothing to gain. Longshot or aeon pro x for the win. It’s too much stress opening over and over. No skinny pusher and the plunger tube inner diameter is wider at the back end. The clunky prime is just awful. I think retaliator springs work maybe a 12 kg will boost to 180. Highest I got was 170 same darts as u. Also in time the pusher o ring gets worn from mag lips. Hope u didn’t hurt urself too bad.
@@bboychips Just a bruise XD. TBH, I don't hate it, mine works well and I think I can bring it to a higher "standard". Everything is super easy to open, shell is pretty rigid and the only few glued parts are very easy to separate. Fingers crossed they'll release another Pro springer soon that won't be worse! I like to make something good with crappy blaster, this one is a "freebie"...not much work