Great video Scott...you are now my number 1 hot tub resource. I am in SE Florida and my tub sits in direct sun without any overhead protection. So it is subjected to a lot of sun and rain. I have a cover cap that I got on amazon for about $50.. While it does keep the tub hotter by retaining even more heat, it has really protected my cover. I only remove the cap every three months when I drain/refil (at which time I also remove the cover and clean top and underside of the cover). The cap lifts with the cover very easily. My cover is almost 4 years old and looks nearly brand new. Do you recommend caps over covers or just let it ride without one?
Great to hear more videos are in the works! I keep looking for the merchandise, particularly a t-shirt that says "You don't need gorilla hands!" Thanks, Scott.
Scott I enjoy all your videos and would like to thank you for the help to install our new hot tub. I really appreciate how down to earth you explain things.
Hey, I have been viewing your previous video's 💯to help me with, what else but, a leak in a roto molded 2 persons hot tub. So thank you so much for such detail. You had mentioned that you worked on roto molded spa's several times over the years. I guess I have to tilt it sideways to have easier access otherwise I have to figure out how to keep jacking it up high enough for me to get underneath it to take the soft spray foam out. Would It appears that the leak is on one or more of the top jets because of how I slowly drained and then stopped draining just below the first layer of jets. Over night I let the water sit just below the top row of few jets and the leak stopped. When you worked on them, did you jack it up 3 feet high or more or did you tilt it, with the motor side on the flat surface because the motor side is the heavier side of the spa so logically it makes sense to tilt it on that side. Cheers from Atlantic Canada, now living on Prince Edward Island, and a DIY"er female attempting with the help of your video's! Awesome!👍🙏🇨🇦
So what could cause breaker to trip if I have 240 coming in each hot does 120-119 even tho I disconnected everything that goes in the board the breaker still trips
I had this problem this morning.. Turned out that the GFCI was junk, (Im not saying thats your problem..)Could be many thing that come into play as to why its tripping..Start at the main and start checking everything.. Process of elimination. Thanks for Watching & SUBSCRIBING
@@spaman5440 i fixed it so my whole electrical box was replace so all breakers was replaced so what happened is the nutl white wire instead of wiring it directly to the breaker he hook it up to a metal bracket so i just unhooked it and hook it up to the breaker and it all turned on everything was working i was really happy but then i turned it on with water and i floaded whole back yard cause the plumbing between two water pumps was almost broken on a half lol so i just finished replacing everything today its 10pm id love to try it but i have to wait till tomrow for the glue to dry completely but shit i never new spas so expensive new board costed me 420 i changed it my self it was burned and then plumbing costed me another 200 and then i got bunch of staff to take care the spa another 150 so basicly its already like 800 bucks i can only imagine how much all this would cost me if i had someone els to do it for me like hire a professional lol
Spa Man, do you give advice on in ground jacuzzi issues? i have an inground that seems to have debris blocking water flow...have tried pushing water back through the pipes...
Hi I need help!! We’re getting error codes like watch dog, SN-2, OH it worked well Friday & now isn’t working even after resetting breaker. Please help!
Great video Scott...you are now my number 1 hot tub resource. I am in SE Florida and my tub sits in direct sun without any overhead protection. So it is subjected to a lot of sun and rain. I have a cover cap that I got on amazon for about $50.. While it does keep the tub hotter by retaining even more heat, it has really protected my cover. I only remove the cap every three months when I drain/refil (at which time I also remove the cover and clean top and underside of the cover). The cap lifts with the cover very easily. My cover is almost 4 years old and looks nearly brand new. Do you recommend caps over covers or just let it ride without one?
Scott, thankyou so much for all of your videos... You have by far the absolute best DIY videos for Hot Tubs. You saved me alot of money thanks again.
Great advice on how to clean the cover without causing damage to it
This is easier than I thought it would be. Thanks for the great video
Great to hear more videos are in the works! I keep looking for the merchandise, particularly a t-shirt that says "You don't need gorilla hands!" Thanks, Scott.
Scott I enjoy all your videos and would like to thank you for the help to install our new hot tub. I really appreciate how down to earth you explain things.
Hey, I have been viewing your previous video's 💯to help me with, what else but, a leak in a roto molded 2 persons hot tub. So thank you so much for such detail. You had mentioned that you worked on roto molded spa's several times over the years. I guess I have to tilt it sideways to have easier access otherwise I have to figure out how to keep jacking it up high enough for me to get underneath it to take the soft spray foam out. Would It appears that the leak is on one or more of the top jets because of how I slowly drained and then stopped draining just below the first layer of jets. Over night I let the water sit just below the top row of few jets and the leak stopped. When you worked on them, did you jack it up 3 feet high or more or did you tilt it, with the motor side on the flat surface because the motor side is the heavier side of the spa so logically it makes sense to tilt it on that side. Cheers from Atlantic Canada, now living on Prince Edward Island, and a DIY"er female attempting with the help of your video's! Awesome!👍🙏🇨🇦
So what could cause breaker to trip if I have 240 coming in each hot does 120-119 even tho I disconnected everything that goes in the board the breaker still trips
I had this problem this morning.. Turned out that the GFCI was junk, (Im not saying thats your problem..)Could be many thing that come into play as to why its tripping..Start at the main and start checking everything.. Process of elimination. Thanks for Watching & SUBSCRIBING
@@spaman5440 i fixed it so my whole electrical box was replace so all breakers was replaced so what happened is the nutl white wire instead of wiring it directly to the breaker he hook it up to a metal bracket so i just unhooked it and hook it up to the breaker and it all turned on everything was working i was really happy but then i turned it on with water and i floaded whole back yard cause the plumbing between two water pumps was almost broken on a half lol so i just finished replacing everything today its 10pm id love to try it but i have to wait till tomrow for the glue to dry completely but shit i never new spas so expensive new board costed me 420 i changed it my self it was burned and then plumbing costed me another 200 and then i got bunch of staff to take care the spa another 150 so basicly its already like 800 bucks i can only imagine how much all this would cost me if i had someone els to do it for me like hire a professional lol
Hey Scott it's Trevor. Keep up the good work!
do a review on your favorite brands!
i dont see the link where to buy a cover from you. please post
Spa Man, do you give advice on in ground jacuzzi issues? i have an inground that seems to have debris blocking water flow...have tried pushing water back through the pipes...
Hi there.
I have a flow error on display.
It don’t appear to be an airlock.
Spa is an emerald 2009.
Ny suggestions?
Thanks in advance!
When my cover get soaked and heavy. I place it in a TeePee position inside out in the sun, and it dries out overnight.
Hey Spa Man, what brand spa flush/purge chemicals do you suggest?
Love your videos
Hi I need help!! We’re getting error codes like watch dog, SN-2, OH it worked well Friday & now isn’t working even after resetting breaker. Please help!
You can call the shop and talk to Scott he will be able to help, Thanks for Watching & SUBSCRIBING
Long, medium bristle brush. Warm water and very little Dawn dish soap. No pressure washer needed.
How can I remove mildew from inside cover of my hot tub please.
😚 𝐩𝓻Ỗ𝓂Ø𝓈Ｍ