Put a toy fuel station & within that place stripped electrodes to autonomously charge the car.In the long run u can apply some random no generator gaming sequence to run cars on random tracks...Underneath track u can use rails on which magnets keep moving on conveyors operated by arduinos so that all trafic stays in motion without bothering to put motor on each car.
I love your work. Can you tell me if you have a list of all the items you need to have to make a car work like this. I see many resisters and other part I'm just not sure what all was used. I would love to try this myself. Thank you.
Good Job !, excuseme sir, what kind of reed switch is installed? because I see in the market that reedswitch will contact if it is hit by a magnet and will break up without magnetism ... if in the faller system tutorial it seems like it functions as a breaker if it gets a magnet ... thanks for the answer
great video , what is needed just for a basic headlight system beside nano or pico led? i want to use it for a diorama so no need for battery, i want to parallel connect to the led strip that will be used to lit up the diorama sky. just need what is needed beside the led cable and cables? any resistor? control chip? (just head;light constant lit) thanks
What is that black substance you use to cover everything, e.g. LEDs after soldering? Is it a liquid tape (rubber) or just a black paint? And why do you apply it? Thanks.
Yaro The product’s name is Plasticine, and prevents the LED light to escape through other openings. www.ebay.com/itm/Kids-DIY-Malleable-Fimo-Polymer-Modelling-Soft-Clay-Blocks-Plasticine-Excellent/222536422361?var=521382802269&hash=item33d03453d9:g:bO8AAOSwjL5ZNhtV
Thanks. This particular seller doesn't ship to Germany, but I will find a similar product. What about the black substance at time 4:22, is it just a black paint?
Yaro Only Flat Black (Tamiya Color)www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=+Flat+Black+%28Tamiya+Color%29&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=Only+Flat+Black+%28Tamiya+Color%29
Estás a un gran nivel , felicitaciones . Algunas consultas , qué adhesivos utilizas , veo que uno de ellos es de faller, lo otro , cuál es la referencia del motor y la batería que utilizaste ? Que es lo azul que estás colocando en el minuto 9 , no logro identificarlo. Y por último , veo que conectaste 2 led intermitentes para los smd. Se accionan con el movimiento del eje delantero ? cómo logras ese contacto ? Nuevamente felicitaciones y gracias por compartir tu trabajo
Jaime Ruz, Gracias!! Por sus comentarios!! Adhesivos:Faller Super-Expert 170490, ZAP-A-GAP-Medium, el azul minuto 9 es: Double Sided Foam Servo Tape #3015 el motor: MD06G18T Gear Motor HO, Bateria Lipo 3.7V FB19 100mAh (Todo por ebay) Y los smd con reed.
Have you seen the rice grain LEDs some run 12 volts I would say most are 5 volts require some resistor soldering they fit in the tiniest holes.FRYS ELECTRONICS sells them . Rail light under fender lights light stairs ladder catwalks number plate they are so tiny and last burn continuously for 50,000 hours. No heat no power drain @milliamps. Like engines a 1000 ideas on these lights Im gonna build just a engine and a experiment in lighting up a engines in LEDs. The Art DECO trains cry for you to do this. Ive seen fine brass engine without any lights or sounds
Hola! Muy buen trabajo, muy pulido, te felicito! yo estoy construyendo un camión a escala hecho en impresión 3D, un poco parecido al sistema Faller ( que por desgracia hasta ahora conozco) como el de tu video. Sin embargo, he buscado algunos diagramas electricos de la conexión como la que tu haces en el video, yo veo que tienes resistencias y diodos, pero no encuentro en ninguna página ese esquema eléctrico. Te agradezco si pudieras enviarme el link donde está el diagrama. Muchas gracias! y gracias por compartir!
Sim ele é inteligente sim,mas as ferramentas os leds e outros artefatos que ele possui ajuda muito,queria ver ele se virar como eu me viro pra customizar os meus hot Wheels.
Excelente trabajo y nivel de detalle, yo estoy realizando un proyecto con un land rover defender 1:87 pero nosé donde comprar toda la electrónica me podrias sugerir una tienda o un vendedor donde pueda encontrar todo, receptor, servo, bateria, leds, motor, felicitaciones un buen canal para los aficionados a las micro escalas rc.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
HOLY SMOKES, OSCAR! As an FJ 40 owner, i must congratulate you on this excellent work!! Amazing.
Excellent work! I thought about trying to do something similar, but the video showed me that I am not that good a craftsman.
Put a toy fuel station & within that place stripped electrodes to autonomously charge the car.In the long run u can apply some random no generator gaming sequence to run cars on random tracks...Underneath track u can use rails on which magnets keep moving on conveyors operated by arduinos so that all trafic stays in motion without bothering to put motor on each car.
Esse cara é inteligente modificou o carrinho meus parabéns 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
I love your work. Can you tell me if you have a list of all the items you need to have to make a car work like this. I see many resisters and other part I'm just not sure what all was used. I would love to try this myself.
Thank you.
Good Job !, excuseme sir, what kind of reed switch is installed? because I see in the market that reedswitch will contact if it is hit by a magnet and will break up without magnetism ... if in the faller system tutorial it seems like it functions as a breaker if it gets a magnet ... thanks for the answer
Very Impressive.
Esse sim é um verdadeiro artista 👍👍
Amazing! Great work on a tiny version of a very cool car!
cool beyond words man fun much fun
Wow! Incredible work! I love it!
great video , what is needed just for a basic headlight system beside nano or pico led? i want to use it for a diorama so no need for battery, i want to parallel connect to the led strip that will be used to lit up the diorama sky. just need what is needed beside the led cable and cables? any resistor? control chip? (just head;light constant lit) thanks
Wow, this track goes hard!😉
Muy bueno me gusta muchisimo gracias por tu deleite........
Jose Miguel Manuel Bajon, Gracias!!
What is that black substance you use to cover everything, e.g. LEDs after soldering? Is it a liquid tape (rubber) or just a black paint? And why do you apply it? Thanks.
Yaro
The product’s name is Plasticine, and prevents the LED light to escape through other openings.
www.ebay.com/itm/Kids-DIY-Malleable-Fimo-Polymer-Modelling-Soft-Clay-Blocks-Plasticine-Excellent/222536422361?var=521382802269&hash=item33d03453d9:g:bO8AAOSwjL5ZNhtV
Thanks. This particular seller doesn't ship to Germany, but I will find a similar product.
What about the black substance at time 4:22, is it just a black paint?
Yaro
Only Flat Black (Tamiya Color)www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=+Flat+Black+%28Tamiya+Color%29&_sacat=0&LH_TitleDesc=0&_osacat=0&_odkw=Only+Flat+Black+%28Tamiya+Color%29
One Word
(or Two)
Is Perfect
como siempre Oscar....exelente trabajo!!!!!!
Fernando Torres, Muchas gracias!!
You are very good at this stuff!!😲
Que buen trabajo, y muy buen proyecto, donde consigues el motor y transmision para estos coches?
//www.sol-expert-group.de
Cool build, cool vid
Absolutely great !
Bruno Picelli,Thank you!!
Incredible nicely done what is it you use to make the led indicators
Estás a un gran nivel , felicitaciones . Algunas consultas , qué adhesivos utilizas , veo que uno de ellos es de faller, lo otro , cuál es la referencia del motor y la batería que utilizaste ? Que es lo azul que estás colocando en el minuto 9 , no logro identificarlo. Y por último , veo que conectaste 2 led intermitentes para los smd. Se accionan con el movimiento del eje delantero ? cómo logras ese contacto ?
Nuevamente felicitaciones y gracias por compartir tu trabajo
Jaime Ruz, Gracias!! Por sus comentarios!!
Adhesivos:Faller Super-Expert 170490, ZAP-A-GAP-Medium, el azul minuto 9 es: Double Sided Foam Servo Tape #3015 el motor: MD06G18T Gear Motor HO, Bateria Lipo 3.7V FB19 100mAh (Todo por ebay)
Y los smd con reed.
Bonjour avez vous un schéma de montage et ou acheter vous vos pièces SVP ? Surtout le module Electronique pour les lumières et la batterie ?
Have you seen the rice grain LEDs some run 12 volts I would say most are 5 volts require some resistor soldering they fit in the tiniest holes.FRYS ELECTRONICS sells them
. Rail light under fender lights light stairs ladder catwalks number plate they are so tiny and last burn continuously for 50,000 hours. No heat no power drain @milliamps. Like engines a 1000 ideas on these lights Im gonna build just a engine and a experiment in lighting up a engines in LEDs. The Art DECO trains cry for you to do this. Ive seen fine brass engine without any lights or sounds
How is the working principle of front wheel steering possible.
good, subscribe!
Very Good
Hola! Muy buen trabajo, muy pulido, te felicito! yo estoy construyendo un camión a escala hecho en impresión 3D, un poco parecido al sistema Faller ( que por desgracia hasta ahora conozco) como el de tu video. Sin embargo, he buscado algunos diagramas electricos de la conexión como la que tu haces en el video, yo veo que tienes resistencias y diodos, pero no encuentro en ninguna página ese esquema eléctrico. Te agradezco si pudieras enviarme el link donde está el diagrama. Muchas gracias! y gracias por compartir!
Great job, thanks for sharing.
DCCTRAIN LIVE, Thanks It is a pleasure!!
вот это терпение!
peshixott, Спасибо !!
impressive!! is it full RC or is it magnetic predetermined travel under road ?
So cute!..
Very interesting video!
K .Morizou Thank you!!
MASTERPIECE
👍🤗🤩, Mike
Great Job, Absolutely like 👍👍👍
kokok panama,Thanks
Thats an amazing project good job
Mario Smith, thank you!!
do you have tu build every car or can u buy them already finished?
Hola amigo cada dia me sorprendes más amigo tengo una pregunta, tú me puedes decir los materiales ?
Good job
great work you make my dream come true
You are amazing
Comentario destacado
김건호
Thanks
what is the motor chassis part number? in fact, where can I get all the parts? Help this newbie pls
Nice
respect
Hopefully you understand this. Your a kook. Fascinating 👍
May i ask you where i can get such a Tow Truck model?
www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=+Tow+Truck+model&_sacat=0
grazy!
insane!
Sim ele é inteligente sim,mas as ferramentas os leds e outros artefatos que ele possui ajuda muito,queria ver ele se virar como eu me viro pra customizar os meus hot Wheels.
Excelente trabajo y nivel de detalle, yo estoy realizando un proyecto con un land rover defender 1:87 pero nosé donde comprar toda la electrónica me podrias sugerir una tienda o un vendedor donde pueda encontrar todo, receptor, servo, bateria, leds, motor, felicitaciones un buen canal para los aficionados a las micro escalas rc.
Juancarloban,gracias por su comentario!!Aquí el enlace www.sol-expert-group.de
Oscar how many hours did this take?
where do you get the cars to mod
this is crazy
Como consigo o sistema de direçao ho.
Maestro
MyToys TV, Gracias!! interesante su Canal!!
thats cool but holy shit who has these skills, i put magnet on wheel under road and glued another magnet on cars, a lot easier
🚙🚙🚙
VARYGOOD
Eu que faço artesanal. obrigado
Can you please do a limo
Very good Idea!!
Oi Oscar do Elias Oliveira . Brasil curitiba
I need this rc chip and battery
I thought it would steer
sou louco com brinquedos, pena que o Brasil é um país de ladrões e não desenvolve.
para conversar .sobre car systew
you must have bionic eyes
Gud .......👍👍👍👍👍👍🖕🏻🖕