Be sure to check description for more information and index of products and operations. And while you are there check out my Patreon page too for early access and voice-over edit of my videos. If you like what I do consider supporting me so I can keep on making: www.patreon.com/blackbeardprojects
So calming to watch. Random noises breaking the quiet. This is like a spa visit though I've never been to a spa but I'm pretty sure that's where they take the rust off of people and make them shiny and renewed.
Just had to make a new spring steel spring plate for mine from the steel off an old saw , the fixing screw was striped so I drilled a hole though and fitted a small bolt and profiled the nut on the outside. High quality steel this is made from so I used three sizes of bit with oil to get though it.great job on yours by the way!
Perfect fix it and not destroy the look very well done .i am big on not destroying the look that only time can give. And im glad you change you're mind about the restoration of this tool . Sometimes less is more and this is one of those times ty.
Impressive. Really like how it turned out and it was fun to see the electro(thingy) you did at first. Can't say I'd ever seen that happen in time-lapse before. Thanks for sharing.
Incredibile come sembra ieri che guardavo il tuo video sulla smerigliatrice a nastro ed avevi circa 10.000 followers e adesso sono già 600.000. Non ci avevo più fatto caso e oggi sono rimasto senza parole. Tantissimi complimenti e spero tu raggiunga presto il milione. Questo è l'esempio di come la costanza ti porti ai risultati che meriti. Buon lavoro (da un giovane falegname)
Can I get one like from everyone that appreciates how many real hours he puts in to do the vids. When its sped up people really have no concept of the time he does
When it came out of the rust removal bath I thought, why even bother, this thing is not worth the effort. However as the process continued I had to pull the chair up closer to the monitor thinking this is going to be good. Yes indeed great restro, and it works. I saw one of those tools made in brass on another channel, and instantly thought, gotta have one of those tools. That spinning wheel on the grinder gets a little scary. As always you do great work...Ken
BB - What is the solution and method for rust removal? My wife has found an old cast iron piece she loves and wishes to restore it. It is about 3' high, 10" or so in diameter a bit larger at the base. The metal is intact but surface rust is all over, cannot get wire wheel on the inside. I was thinking of using this method in a drum of sufficient size.
This was the resurrection of a dead tool , and you brought it back to life ... 🤔 Hey ! are you the Jesus of tools ? .... Lol..... Lmao... I'm just under the influence of the of herb here in Boston.. it's legal here now so I made use of it.. But Ken man... real good work and it's well admired by a multitude of people.
Muito interessante os trabalhos executados. Outro detalhe que acho muito bom, é a organização e limpeza da oficina! Parabéns ! :) Very interesting the works performed. Another detail that I think is very good, is the organization and cleaning of the workshop. Congratulations!
Ciao, come mai hai preferito non lucidare il manico, lasciandolo apparentemente "vecchio"? E' stata una cosa voluta? Complimenti per tutti i tuoi lavori!!
Thanks Steve! Not really, I have others with very light hatching, so I went a bit deep on this one, not sure if it will affect much the clamping to be honest
Порядок операции и материалов: Электролиз, чтобы удалить ржавчину: приготовить водный раствор карбоната натрия, соединить тисочки с отрицательными, а арматурные прутки - аноды к положительному выводу 12 В зарядного устройства постоянного тока (автомобильное зарядное устройство) на 3 часа, на уровне 10 амперов.
I dunno.. It's just a preferance, but i couldn't get myself as far as to sand my leg vice when i got it. The furthest i got was just cleaning it up with an abrasive wheel. Just feels like I'm taking away from the tool's personality when i grind out nicks and scrapes. Unless of course it impares preformance, then i completely understand
As the tool came out of the smudge of the electrolysis it reminded me of the birth of an alien monster... =:-o Nice job, turned out nearly too beautiful to work with... Thx for the vid!
Be sure to check description for more information and index of products and operations. And while you are there check out my Patreon page too for early access and voice-over edit of my videos. If you like what I do consider supporting me so I can keep on making:
www.patreon.com/blackbeardprojects
Footage of the electrolysis were cool, if you do it again, can ypu try yo do it in a square or rectangle aquarium so no more distortion
Maybe you could put info in form of subtiles wich you can toggle to your liking? Or it takes too much time? Great video, awesome intro! ❤
I personally, would love an update on the pony.
Is your Screw Rod supposed to be Bent?
Legends say his videos are actually not speeded up. That's how he actually works.
Are you sure about that?
So calming to watch. Random noises breaking the quiet. This is like a spa visit though I've never been to a spa but I'm pretty sure that's where they take the rust off of people and make them shiny and renewed.
Very cool touch! To do as much as necessary, but as little as possible...
I don't even need to watch the video. Just the sound of it is satisfying.
you always do a good job 👏
Just had to make a new spring steel spring plate for mine from the steel off an old saw , the fixing screw was striped so I drilled a hole though and fitted a small bolt and profiled the nut on the outside. High quality steel this is made from so I used three sizes of bit with oil to get though it.great job on yours by the way!
Perfect fix it and not destroy the look very well done .i am big on not destroying the look that only time can give. And im glad you change you're mind about the restoration of this tool . Sometimes less is more and this is one of those times ty.
How much fun do you have restoring these thing
Fantastic 👌
This dude is making a good impact on the world wish more people where like him
Impressive. Really like how it turned out and it was fun to see the electro(thingy) you did at first. Can't say I'd ever seen that happen in time-lapse before. Thanks for sharing.
Thanks Ray!
Incredibile come sembra ieri che guardavo il tuo video sulla smerigliatrice a nastro ed avevi circa 10.000 followers e adesso sono già 600.000. Non ci avevo più fatto caso e oggi sono rimasto senza parole. Tantissimi complimenti e spero tu raggiunga presto il milione. Questo è l'esempio di come la costanza ti porti ai risultati che meriti. Buon lavoro (da un giovane falegname)
Grazie mille :)
Lovely job, not over restored means you are still happy to use it,
Well done my frient... just the way it should be done!
This was a kind of half and half resto .... I like it!!
Absolutely. I love the contrast of the rugged and the polished. It looks amazing.
Adding to the "List of Things I never thought I'd see on the Internet"... Rust Removal made Epic.
And now you want more right?
@@BlackBeardProjects Now that you mention it... 😊
Just awesome! I have never seen a vise like that. I want one. Great job.
Cool. Few people like that can work that way.
Why do I love these videos so much?!?!
I love the Game of Thrones type intro I watch your vids every night so satisfying and your work bench is so well oiled lol
I don’t know how to use that hand vice but you did a beautiful job restoring it.
Can I get one like from everyone that appreciates how many real hours he puts in to do the vids. When its sped up people really have no concept of the time he does
So nice to watch a quality restoration. There are a lot of bad resto vids out there
Hi from England
That's a nice restoration there is that...
WONDER IF GUN BLUE OR BLACK OXIDE WOULD WORK FOR COATING..NICE JOB!!...LOVE THE INTRO...
When it came out of the rust removal bath I thought, why even bother, this thing is not worth the effort. However as the process continued I had to pull the chair up closer to the monitor thinking this is going to be good. Yes indeed great restro, and it works. I saw one of those tools made in brass on another channel, and instantly thought, gotta have one of those tools. That spinning wheel on the grinder gets a little scary. As always you do great work...Ken
BB - What is the solution and method for rust removal? My wife has found an old cast iron piece she loves and wishes to restore it. It is about 3' high, 10" or so in diameter a bit larger at the base. The metal is intact but surface rust is all over, cannot get wire wheel on the inside. I was thinking of using this method in a drum of sufficient size.
This was the resurrection of a dead tool , and you brought it back to life ... 🤔 Hey ! are you the Jesus of tools ? .... Lol..... Lmao... I'm just under the influence of the of herb here in Boston.. it's legal here now so I made use of it.. But Ken man... real good work and it's well admired by a multitude of people.
Nice file job there hoss!
Muito interessante os trabalhos executados. Outro detalhe que acho muito bom, é a organização e limpeza da oficina! Parabéns ! :)
Very interesting the works performed. Another detail that I think is very good, is the organization and cleaning of the workshop. Congratulations!
So, your from uk too. Seen the park side heat gun. Lidl, I’m Northern Ireland
I've been binge watching these and just now realized that most of them have over 1 mil views.
Guess I'm not the only one lol.
Good work. Just FYI spring steel might become brittle when in electrolysis bath.
Ne ho comprata una simile ma più piccola proprio ieri in un mercatino ! molto bella ... ottimo lavoro!
Great editing on this one! Keep up the good work. 👍
Have you ever tried or thought about using fluid film or paste wax on a project like this?
Beautiful Result👍🏻
Nice! good job.
Gold hands! Bravo🙌
Nice, very nicely done!
I love your channel. You are the best
The best method to remove rust.
Ciao, come mai hai preferito non lucidare il manico, lasciandolo apparentemente "vecchio"? E' stata una cosa voluta? Complimenti per tutti i tuoi lavori!!
Nice works! Cheers. I have subscribed your channel. Can't wait to watch the next video!
eres un fenómeno amigo, desde las islas canarias un saludo al mundo!!!
literally my favorite asmr, keep up the great work
Awesome 😎 I love your vids ❤️🙂
Why did you polish the outside of the jaws? Why not polish the wingnut?
Where do you go with all that water, is it useful for any thing?
Another beautiful job cheers to you
Cool start!
Looks great. I have a small one I'm about to do. Any reason why you went so aggressive with the jaw cross hatching?
Thanks Steve! Not really, I have others with very light hatching, so I went a bit deep on this one, not sure if it will affect much the clamping to be honest
That is beyond talent!!
Paint it with hammarite green :( the color and the quality of the paint u use is very beautiful)
WHAT AN EPIC INTRO
YEA!😆
Nice work BB, Turned out beautiful!
0:05 what is this? Water?
So how to use it. Is it like a video grip?
wasn't the bolt a bit bent? shoud it be?
Great job. Serious question: How would you use this vise?
your icon made me wipe the screen a few times
epic polishing technique
Ottimo lavoro!
I always love the part with the rust soup after the electrolysis xD
@blackbeardprojects How do you keep track of all the parts during these projects? I would almost definitely lose multiple screws, washers etc.......
I take videos ;)
Was it deliberate that the bolt was left bent?
Pretty sure it has to be curved for the vice to open properly.
Why you dont make a restauration video about your polishingmachine? It looks really old.
Seus vídeos antigos eram melhores, mas os novos ainda estão bons parabéns
what's your setup for electrolysis as far as your power source?
thanks for this post. saved my life.
Please explain.
was rly bored
That was awesome 👍🏼👍🏼 you never disappoint.
Nice work!!
I have one question where do you find your restoration projects at? I have looked at yard sales, flea markets and a lot of other places.
I find stuff there.. sometime at the steel scrap yard but mostly flea markets
I love it, how much???
ابي منك لو تسمح تعملي ختم حديد بحيث اختم على الخشب بالحرق
Nice job! A nice place to stop too. Was glad you didn't paint it :)
Welders clamp and or sheet metal brake I would say it was used for welding sheet metal it had welded material on it
Is this the grandfather of the vise grip pliers? HMMMMMMMMM
That turned out really nice. Great work!
Порядок операции и материалов:
Электролиз, чтобы удалить ржавчину: приготовить водный раствор карбоната натрия, соединить тисочки с отрицательными, а арматурные прутки - аноды к положительному выводу 12 В зарядного устройства постоянного тока (автомобильное зарядное устройство) на 3 часа, на уровне 10 амперов.
Music and content photography live up to the level of upscale output
I was waiting for the painting to start...
@black beard projects are you from Germany? i see lidl parkside blower, i have same tool:)
Gotta say the beginning was freaking epic lol
I dunno.. It's just a preferance, but i couldn't get myself as far as to sand my leg vice when i got it. The furthest i got was just cleaning it up with an abrasive wheel.
Just feels like I'm taking away from the tool's personality when i grind out nicks and scrapes.
Unless of course it impares preformance, then i completely understand
As the tool came out of the smudge of the electrolysis it reminded me of the birth of an alien monster...
=:-o
Nice job, turned out nearly too beautiful to work with...
Thx for the vid!
Great video
Always gotta test if clamps work by giving it a few test clicks. Like tongs...
what grit do you use on the belt grinder for steel
I have from 40 to 400 I think. Here used up to 320 I think or something close
What was the second file you used for re-cutting the jaw teeth?
Regular triangular bastard file
Ah.. It looked like it might have been a metal checkering file... Thanks
Good job 👍👍👍👍👍
Why did you put two sacrificial anodes? Does it work faster?
more coverage, it needs line of sight
Yeah, electrolysys dont go around corners.
Right! The more the better
hello, why do not you buy an angle grinder and a wire brush
Una restauración increible. Saludos.
А где вы их находите? т.е. ржавые и безхтзные
But... but... the bolt was still bent? ! Was it meant to be?
It can't open much if not bent. I've seen some with straight bolt but wider holes... Not sure if these are bent by design or necessity by the way!
Хорошо отмыл👍
How do you mount that in a workbench?
Not supposed to be mounted. Hand vise because you keep it in your hands!
@@BlackBeardProjects Thank you very much! I didnt notice that :)
Sono orgoglioso di te, sono pochi gli italiani con un pubblico ampiamente straniero. Mi piacerebbe conoscere la regione da cui provieni...
Epic end result buddy, I would love to see this in use. Do you have any plans for it to make an appearance in a future build?
I'll do my best for sure! I've used these kind of vise often but probably never on video.