If any of you are actually interested in creating one of these sorters and work with inches, below is a listing of the "centimeters" as shown in the video converted to inches. They are set to 1/64", but you can get as close as you want and I'm sure everything will work just fine. Note: Be cautious when cutting out the "coin drop slots". Don't cut too high!! From smallest to largest: 1.50 cm = 19/32" 2.00 cm = 25/32" 2.50 cm = 63/64" 4.50 cm = 1-49/64" 6.00 cm = 2-23/64" 7.00 cm = 2-3/4" 7.50 cm = 2-61/64" 10.0 cm = 3-15/16" 10.2 cm = 4-1/64" 14.0 cm = 5-33/64" 16.0 cm = 6-19/64" 50.0 cm = 19-11/16" I'm thinking of making one, but I will be changing some of the parts. If I can, I'll post a description of what I've done. Ken H. Sr.
This comment was added in here just as a product suggestion for those of you who need a sturdy, flat surface for projects like the one above. I was at our local "Dollar Tree" store (everything is a dollar) and ran across some clipboards. They measured 1/8" x 9" x 11" of useful surface. There is a steel clip at the top which would take your nails off if you're not careful ! (Use it as a clamp). 1/8" is a nice size for those smaller projects. They are made from sort of brown, fibrous mat'l. Let me know if you find any.
HINT: About the boxes which will hold the sorted coins --- You might want to surround the entire box "set" with 1/4" thick strips of 1/2" to 3/4" wide glued or screwed wood strips. These will hold the boxes in place while using the sorter and will allow the removal of the boxes when complete (the width of the base may need to be a bit wider). I think I will try this sorter out for my Grand-daughter for Christmas. "The Q" - By the way...what DIA. or R. did you make the center "paste board" (...brown) circle? (4:03) It looks like it really doesn't have to be exact, but I'd like to use the same dimension as you did.
OneLove ™ No, the closest hole is for the 10 cents so when they pass by it they fall down, and the other ones pass, then when they reach the 25 cent hole, the 25 cents fall through that hole, and so on.
For everyone saying “the time it took you to make this machine i would have already sorted the coins” think about it like this you just wipped out this machine from your basement and put your coins in and bam or maybe your mr beast and you have to sort out 1000000 pennies
You should make the boxes taller from left to right. It will prevent the coins falling into the wrong boxes and also smaller value coins are usually more than higher ones, meaning more space for these at the same time.
This is really cool. Something to do with your kid on a weekend. The biggest issue is that he was trying to solve the problem of counting how much money he had. This machine, while great for sorting, doesn’t count. He’s still going to have to go through each box and count them and then add it all up. Definitely cool, but spending time and money to add another step?
get rid of all the holes on the track slap a neodymium magnet on the end of the track and force the coins out of the end instead of the bottom and you could have a mechanical copper penny sorter
0:48 did you see? -_-
BroHacker yes
see what
Everyone else talking that they could sort the coins faster. Why don't you appreciate what this man's done with cardboard.
YEEETTT --- It's not cardboard... It's mostly wood and thin ply.
@@Liofa73 most people do it with cardboard
I'm sure they're being sarcastic
Also this is reusable
Why make an ENTIRE MACHINEEE
4:53 Thank me later.
I thanked you by giving you a like is that okay
Like your profile pic 🥳
Думаешь мы не распознаем грывню ?
yea yea yea yea
If any of you are actually interested in creating one of these sorters and work with inches,
below is a listing of the "centimeters" as shown in the video converted to inches.
They are set to 1/64", but you can get as close as you want and I'm sure everything will work just fine.
Note: Be cautious when cutting out the "coin drop slots". Don't cut too high!!
From smallest to largest:
1.50 cm = 19/32"
2.00 cm = 25/32"
2.50 cm = 63/64"
4.50 cm = 1-49/64"
6.00 cm = 2-23/64"
7.00 cm = 2-3/4"
7.50 cm = 2-61/64"
10.0 cm = 3-15/16"
10.2 cm = 4-1/64"
14.0 cm = 5-33/64"
16.0 cm = 6-19/64"
50.0 cm = 19-11/16"
I'm thinking of making one, but I will be changing some of the parts.
If I can, I'll post a description of what I've done.
Ken
H. Sr.
Reminds me of Chuck E. Cheese's
Always loved the coin sound XD
0:48 have -_-
Has anyone found out that Q means?
I think its Quickbuilder
Bvi lq💩
Quin his name
@Eowyn Wesley Sombilla ×
Qhoc3
Szqhoc5
Cold ! H
Quickthinker
I remember the good old days when you could build everything out of cardboard
I liked my own comment ‘cause nobody else would
Ha
Pink Pup ..
مصرخلفمؤننفلك
For me those days still exist...
Why do I feel like someone watched this in slow motion to see if even 1 coin went into the wrong one
So did it fall on the wrong spot?
Haha...why would anyone do that? ... Btw a $0.50 fell into $1
Jk
Give this man a bucket of legos and he'll make a m249 in 5 seconds
Awesome crafts genius
give him 10 and hell make an artillery
“It doesn’t cost that much”
*Has to make a literally machine because he has too much money to count by hand*
👍👍💘💰
Cha-ching!
Почему всё на английском если человек украинец сам по себе???
1 Слава Украине
Во 2 для того чтобы англоязычные могли тоже смотреть (+ аудитория)
@@cheesy_boya =))
😂😂
@AndyChannel понял принял, спасибо=)
I will easy to put proper order places amazing Idea THE Q
Someone translate this sentence, just reading it made me lose my last 2 brain cells 😂
r/Ihadastroke
Instructions were unclear...
Accidentally made an atm machine
Lol
RipsRops .
Very very very very very very good bro
Question: How many hundreds of times did you watch this video, and still get it wrong?
Me: Yes.
This comment was added in here just as a product suggestion for those of you who need a sturdy, flat surface for projects like the one above. I was at our local "Dollar Tree" store (everything is a dollar) and ran across some clipboards. They measured 1/8" x 9" x 11" of useful surface. There is a steel clip at the top which would take your nails off if you're not careful ! (Use it as a clamp). 1/8" is a nice size for those smaller projects. They are made from sort of brown, fibrous mat'l. Let me know if you find any.
The time u took to make this machine, I would have finished sorting those coins.lol
XDD
unless you want to repeat every time manually :)
@@MrEvijayakumar true
Apparently, coins.lol is now legally a website.
@@RenegadeScooter no it isnt lol
Drop the noise. Other than that WOW a coin sotter thanks.
I've seen him spending all of his coin for cokes in the vending machine.
No one just sorts the coin. We sort it so that we can count it, so what about adding a coin counter to this machine? It would be amazing!
Прикольная копейкосчиталка
Verry good
ты же с украины) монеты украинские
Интересно, коли с Украины.
wow
Да он з україни копійки
Много 10 копеек залетали к 25
Дюже много
He made a lot of cool things like big candels and more THE Q is more better than mini gear cause THE Q makes more cooler things
Me: BRUH I SUCK AT MATH
Also me: WaIt... i CaN bUiLd A mOnEy SoRtInG mAcHiNe Bc Im ToO lAzY tO sOrT tHem
It probably took longer to build the machine than actually counting them
And it probably took longer to write that comment than anyone would actually care to read it
alfie Chambers, you read it it though and obviously cared as you responded back
Wtf! I block all wix announcements and your video starts with an fucking wix announcement?
The Best
🇺🇦
Tu es riche toi
You are rich yourself
Omg
Me frensh and yourself
I think that this video is made from the size of American coins and this would not be useful for Indian coins and currency
Supplier: How many cardboard do you need?
Q: Yes.
HINT: About the boxes which will hold the sorted coins --- You might want to surround the entire box "set" with 1/4" thick strips of 1/2" to 3/4" wide glued or screwed wood strips. These will hold the boxes in place while using the sorter and will allow the removal of the boxes when complete (the width of the base may need to be a bit wider). I think I will try this sorter out for my Grand-daughter for Christmas.
"The Q" - By the way...what DIA. or R. did you make the center "paste board" (...brown) circle? (4:03)
It looks like it really doesn't have to be exact, but I'd like to use the same dimension as you did.
Wow
Cool but seen 10 cent piece fall Thur the 25 cent slot when they build up it pushes then further down and they will all Thur any hole
OneLove ™ No, the closest hole is for the 10 cents so when they pass by it they fall down, and the other ones pass, then when they reach the 25 cent hole, the 25 cents fall through that hole, and so on.
For everyone saying “the time it took you to make this machine i would have already sorted the coins” think about it like this you just wipped out this machine from your basement and put your coins in and bam or maybe your mr beast and you have to sort out 1000000 pennies
TBH, if time saving is the goal, you'd probably just buy one that somebody is already mass producing.
If you want it automatic you can add small motor eith potentiometer.
To see
Next up: making bill sorter machine xD
Ydbf THB by various month Negev because her JNI kidding MOP Key joking o.k. I'm
I think wood part can be also made of cardboard
not in this project..
@@TheQ_original why?
Почему ты с Украины но пишешь на английском?
Потому что он снимает видео для англоязычной аудитории
Do you make a coin sorting machine with same diameter, but separating the two different colors like silver and gold?
I love this soundtrack too
I bet u have a lot of cardboard and wood
Пацан з України харош
I very hate ad rise of kingdoms so much😠
А что тут делают копейки из Украины ?
Видимо автор живет в Украине.
You probably could have saved money and sorted all your coins from that time you had to make this machine
you did it before
Only German speakers understand why "wixsite" doesn't look too trustworthy. ;)
Only German speakers understand why "wixsite" doesn't look too trustworthy. ;)
Great looking project/result! Congrats!!
What kind of coins are you you using in your video?❤😁🤑💸💰
UAH
Looks like euros
*Rich Man* : "WE NEED THIS!"
Hello The Q
rich men use credit card hehe
Next video is and automatic coin sorter because it’s too tiring to spin a cardboard cut out in a circle
How much better would this video be if they didn't include that god awful music?
If I had done it with your hand by the time that I worked out this verse and it was the same as some I am Abdullah from the Republic of Yemen😂😂😂
I have this idea earlier than you maybe but not for youtube
Super bro
Skip to 4:28 if you dont want to watch the whole video
Кто заметил гривны лайк
Я заметил
Крууууто
Fajny film
How Do you get this idea?
video work good
The Q is better than me in D&T
Is he a graduate student in mechanical engineering who builds DIY machines like for fun
🤗
Que cuesta menos acer todo eso o comprar una pinchi alcancia
I want to purchase this machine..pls telme sir how much
А как быть с новыми 1, 2 гривнами, которые по размеру как 10коп ?
Подгонять под их размер .
@@CardboardExpert вы держали в руках новые монеты 1, 2 грн? Разница в размере от 10коп на уровне погрешности
HIKAKINと5万の差ってすげーな。
I love the Q's diy coin sorters
Awesome
you sale this project?
I could literally make one with LEGO
Чому ти соромишся свого походженя
Он просто хочет снимать видео для англоязычной аудитории, многие так делают
Я тоже снимаю для англоязычных. Так аудитория вещь намного больше. Это бизнесс.
You should make the boxes taller from left to right. It will prevent the coins falling into the wrong boxes and also smaller value coins are usually more than higher ones, meaning more space for these at the same time.
واو روعه
This is really cool. Something to do with your kid on a weekend. The biggest issue is that he was trying to solve the problem of counting how much money he had. This machine, while great for sorting, doesn’t count. He’s still going to have to go through each box and count them and then add it all up. Definitely cool, but spending time and money to add another step?
Funnel system should be easy enough to make
get rid of all the holes on the track slap a neodymium magnet on the end of the track and force the coins out of the end instead of the bottom and you could have a mechanical copper penny sorter
Wonder how long it took to wash off the sharpie or marker after flipping the cap off.
Very nice bro😍
Who likes The Q channel 👍👍👍👍
Українські копійки)
4:17 u drew on ur finger lol
Even he builds a house for his hamster and thats nice
Опа знову гривні :) про те чудова конструкція
Yay its a UAH but it's cool construction
MITIA izymryd English
AndyChanne
This machine is not useful because we sort the coins for counting them not for just sorting them
Ohhh! 🤗
Stop putting ads in videos
In der Zeit wo ich das gebaut hätte, hab ich das Geld schon gezählt...😂😂😂
Ist halt wirklich so😂😂
Da fuck are u saying
👍
Копійка гривню береже😉 . А винахід 👍 класний !
Congrats to 150 videos!