The Nord Lock Superbolt has always struck me as an intelligent solution to a vexing problem. It's amazing what ingenuity and good engineering can accomplish.
I learned about these when I was 18 installing a LM Sprint 6 generator at a mine site. I had two left over for years but they lost to the sands of time
Superbolt sizes start at M16 and 3/4". At these sizes and up, Superbolt can achieve high clamping loads with low torque requirements using only hand tools. If the scale on the torque comparison chart was adjusted you would see a large difference in torque requirements even for M30. For example you would need around 930 Nm to achieve 310 MPa on M30 stud. With Superbolt, the torque is only 30 Nm. Drop us an email at info@nord-lock.com if you have any further questions. Thanks.
The Nord Lock Superbolt has always struck me as an intelligent solution to a vexing problem. It's amazing what ingenuity and good engineering can accomplish.
wonderful video, we always recommend Superbolt Multi-Jackbolt Tensioners to our clients when working on heavy load machinery.
Was looking for the Luigi super nut meme, but this video was quite informative nonetheless
Superbolts are amazing devices.
I've used them on the Bucyrus Electric rope Shovel they're best bolts
Hi great
Brilliant for large bolt diameters !
I learned about these when I was 18 installing a LM Sprint 6 generator at a mine site. I had two left over for years but they lost to the sands of time
You should probably show the much more common right-hand threads.
amazing...!
I searched "super nut" and I found this.
So the bolt diameter needs to be 60mm or more to really justify the purchase of this product.
Superbolt sizes start at M16 and 3/4". At these sizes and up, Superbolt can achieve high clamping loads with low torque requirements using only hand tools. If the scale on the torque comparison chart was adjusted you would see a large difference in torque requirements even for M30. For example you would need around 930 Nm to achieve 310 MPa on M30 stud. With Superbolt, the torque is only 30 Nm. Drop us an email at info@nord-lock.com if you have any further questions. Thanks.
Mis disculpas por no escribir en inglés. Si alguno puede darme la dirección de correo de este proveedor, mucho le agradecería.
You are very welcome to contact us on bolting@nord-lock.com!
Tightening a hex nut with a pipe wrench being hit by a sledge. Cringeworthy.
그러나 이런 짬뽕 무대가 남발되면 ㄱ 등 다양한 ㅗㅑㅐㅔㅣ,ㅏㅡㅓㅜㅕㅛㅅㄱㄷㅈㅂ ㅁㅅㄱㄷㅈ ㅁㅂㅈㄷㄱ쇼ㅕㅑㅐㅔ