Ivan_05nbs cool because I have a 01 single cab with a 3/8 I put my self and I have quite a bit of camber and it’s going through wheel hubs and wheels left and right I’ve took it to get aligned and people don’t even wanna look at it so I have to fix it my self some how
@@martinrodriguez363 if you have a local shop that does drops see if they can install the camber fix kit because I think you have to hydro press them in
“Well put it in right nigga” 🤣🤣
this a vibe bro
What size tubing did yall use for the step notch
Damn I was tryna go 4/9 on my extendedo but this shit looks clean
how did you fix your pinion angle on the differential
Drive shaft hitting primo ? Also did you fix your pinion angle on the differential?
Drive shaft doesn’t hit and the pinion angle was correct
@@notsosinglestatikboyz9721 how'd you get the good pinion angle
Where can I get the emblem like yours !
Which emblems bro
@@notsosinglestatikboyz9721 bow tie for the front grille * couldn’t find one.
@@dannynbs3752 ohhh you can look on Amazon bro
Your gas tank don't hit or scrape?
Did you only put 3” drop springs ?
Yes
Did you end up having pinion angle problems I’m getting vibrations @ around 60mph
I haven’t had pinion angle problems
I’m sure there’s a kit that can fix it
How long it take to drop the truck ?
As long as you know what to do it’ll take 3 hours ish
What brand are the drop springs?
Just some eBay springs not sure what brand
Did you need to relocate the gas tank??
No we did not
Did you a 3 inch drop spring
Yes for the front 3 inch drop springs
handsome
Alex Reyes Obs woahhhhh man
Is it a struggle to drive it tht low ? There 22 or 20?
20’s and a little since Austin roads are bad
Did u get camber on it bro ? And if so wat did u do to solve it
No camber but depending on your year you can either get a simple alignment or a camber fix kit from eBay
Ivan_05nbs cool because I have a 01 single cab with a 3/8 I put my self and I have quite a bit of camber and it’s going through wheel hubs and wheels left and right I’ve took it to get aligned and people don’t even wanna look at it so I have to fix it my self some how
@@martinrodriguez363 if you have a local shop that does drops see if they can install the camber fix kit because I think you have to hydro press them in
What tire size on the rims?
275/35/20
How did you get an 11 in the rear ???
Rear axle flip kit 6 inches
2 inch shackles
2 inch lowering blocks
Drop shocks with comes out to 11
Are those 20s? And what tire size
🤘🤭
Exhaust setup on it?🔥
Long tube headers and full straight pipe
wtf 😂 do not take them ur truck 😂
You late as hell truck been lowered and the customer very happy 😂