One mistake stepping over tools without safety harness will lead to a lifetime of health issues or certain death. I know you don't want to hear it but safety first.
It is prohibited to use heaters that come into direct contact with the bridge steel. it can change the composition of the steel, resulting in the bridge steel weakening. It should be heated in a separate place..
Good work. Nice to see these type of repairs being done. I've done the same on old water towers.
Nice fall protection.
This is not a video about fall protection
Found the troll from under the bridge!! ^^
One mistake stepping over tools without safety harness will lead to a lifetime of health issues or certain death. I know you don't want to hear it but safety first.
Great video!! I have a couple river busters but have only broken concrete with them. Where can buy the attachment for shaping the rivets?
Probably at the same place you bought your rivet busters from 🤷♂️
@@AK-47ISTHEWAY He stole them
These guys arent even pretending to be tied in! 😂
In the original Flash Gordon the spaceships had rivets. How cool was that? I'm for the old school tech in supersonic aircraft.
heating the beam as well? Aren’t you supposed to heat the bolt prior to inserting it?
What is this? How not to work high above the ground in noisy environment?
Well damn, little extreme don't ya think?
It is prohibited to use heaters that come into direct contact with the bridge steel.
it can change the composition of the steel, resulting in the bridge steel weakening.
It should be heated in a separate place..
Even though riveting is a technique from the 19th century that doesn't mean you have to use 19th century health and safety.
Safety first, no hard hat
Beautiful, majestic and poignant sound of rivet gun!
Cold driven rivets. All bad. Hear the rivet then place and drive
Thanks for sharing. It does appear your team might not have lasted very long building the Empire State Building in one year! LOL Best of luck!
They're doing repairs. Probably a one day job. These are old bridges. Rivets need replaces sometimes.
they built the empire state building in a year by not having labor laws. five people died.
exactly what i was lookin for thanks
How much force is needed to be applied to the rivet gun by the human? how much by the electricity?
INSTALL GENTOO just enough to keep it steady
I have a press, it works at 30 tons, which is enough to manufacture and place rivets
OSHA Approved.
This is some dirty stuff, love watching you get all in those rivets. So jealous...
p.s. what else have you drilled those rivets with.
Mold each rivet in a minute?! That's really time consuming there.
I'm not OSHA, so I don't care. But where are the ppe's
Need safety Balt on body not let fall off get hurt or kill
Rivets are still legal?
Still widely used on high carbon steel truck chassis frames where you can't weld.
It's a repair job. They're not building the bridge.
لعيون المهندس صالح احلا لايك
I just got reported for not having a harness on lower then that 🤣
Yes!
Its a hammer not a gun !
Great work, ignore the safety fascists commenting on here
And get ignored back at the begging street for medical bills.
Safety fascists ? Can you define either of those two words? 😅