First Start Malossi 70cc, Custom Intake & PWK 21mm | Scooter Building Series
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Current Setup:
Malossi 70cc Sport
Technigas Q-TRE Exhaust (Unplugged)
PWK 21mm Racing Carburetor
Custom made big Intake (RQ Intake 32mm for AM6)
Variator weights 3x 5,5g and 3x 6,0g Weights
White Malossi Pressure Spring (5%)
Original CDI 😦
-
-
-
The moped in the video is a Sym Shark 50 AC 2001.
If you have any questions regarding the channel or scooter, please leave a comment!
Har en likadan förgasare👑
bro can you help me., I installed 70cc on my speedfight2 and added 88-90 main jet,. and 32 idle jet..,, it runs good half throttle,. if I try going more than 50/60kmh more than half throttle it start bogging. I tried 35 idle jet it ran too lean,. maybe I got an air leak in intake manifold and I can't get it running full throttle I Don't know, so I hope you could help me....
Try downjetting 10 sizes if that doesnt work try upjetting 10 sizes, if it doesnt run better after that try to clean your airfilter or just try riding without to see if its dirty
Va de lätt o fixa insuget? Funderar på o fixa 70cc t min gamla kina också
Ja fan om du har borrmaskin hemma är de ba o fixa. Men köp ett insug som nästan har samma bulthål som ditt original så du inte förlorar för mkt material osen kör med silikonpasta om det blir tjuvluft, mitt hade inte det dock
Jaką masz dysze w gaźniku mam również ten sam gaźnik też cylinder 70cc i dusi go ?
90
Can you tell what main jet and idle jet you are using???
Original
med vilka munstycken kör du
Körde original munstyckena 105 och 38
What's your ig?
Augustdahlqvist2