Making the Jeep Wrangler JL Light Up the Trail! Rough Country Lower Windshield Cube Light Install
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- Matt shows you how you can light up the trail by installing a Rough Country Black Series 2" Lower Windshield Cube Light Kit on your 2018-2020 Jeep JL Wrangler.
Purchase Product Here:
Black:
www.cjponypart...
Chrome:
www.cjponypart...
Featuring 2880 lumens, 36 watts, 30 degree spot beam, IP67 waterproof rating, and each light contains six 3-watt high intensity Cree LEDs.
Made with durable die-cast aluminum housing, and moisture breather technology, this lighting upgrade is built to last.
Adding more lighting to your 2018 Jeep JL Wrangler, this 100-percent bolt-on Rough Country install will have you back on the road and lighting up the trail better in no time.
Check out more Wrangler Light Mount parts from CJ's here:
www.cjponypart...
Check out more Rough Country parts from CJ's here:
www.cjponypart...
Subscribe to CJ Off-Road on TH-cam here:
/ cjoffroad
Follow CJ Off-Road on Instagram here:
/ cjoffroad
Music Provided By:
www.epidemicsou...
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
The lights are the easy part. I was hoping for the wiring portion. It would have been nice to see you do the wiring to the aux switches since that is the harder part. Did you cut the harness, what wires and switches did you use? How did you connect the wires before putting them to aux?
Can we please get the wiring instructions...I agree with the other comments..that is the part that we are all looking for!!
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
Great vid, thanks. But can you PLEASE do one that shows the full wiring process?
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
This is kinda worthless since it is not a complete installation video, needs to show wiring as well to be complete. Needs to show wiring with the Mopar AUX switch system and/or the included wiring harness.
P Covey agreed!
The included harness simply connects to the positive and negative terminal of your battery, and the mopar switch system gets wired into the positive of the AUX 1-4 switch, and then grounded onto the stud right next to the battery.
Matt CJPP Can you show that part?
P Covey completely agree, they did the wiring so why not show it for beginners?
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
seems like other videos by this guy are not complete either
EVERY DAMN VIDEO! they never show the under hood wiring. this is getting frustrating.
Really great info, easy to understand. I have a Jeep 2002 Liberty. Great video!
Thanks for watching!
Good information. I will make sure to get the aux switches when I upgrade to the new JL.
Glad you liked the video!
Those switches are worth their weigh in gold; plus you get the added benefit of a wired trailer hitch and bigger alternator.
Please show a video of wiring to the auxiliary switches...
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
for 99 bucks it should have a matching bolt so you don't have one ugly silver bolt with the other black ones.
love all your videos u shoul finish with the wiring a lot more important
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
If I wanted to point these lights pointing straight up to the sky do I have that adjustability? Or is it limited in the position it can be aimed at?
How do you wire the lights to the aux switch? Please upload a video to demonstrate
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
Great video, now know how to remove and reinstall the rounded cowl edges for chroming...
Do they fit on 2019 jl
Yes. Just ordered some for mine.
@@swashbuckler5539 I got rigid lights they bright af
@@ivandelcid1592 right on!! I’m putting on my lights soon. Then headed to Co/Ut in June! So hyped.
Ima be on jeep topless on Saturday
@@ivandelcid1592 put my pods on today can’t wait to test them out
Now you can't lower the windshield without having to remove the lights, not a big fan of that. However they look good.
Thanks for watching!
Incomplete!! Pls delete the video its helpless!! Wiring is the most important but it wasnt show.
If you are using the harness included all you have to do is connect a positive and negative to the battery, and if you use the mopar auxiliary switches just connect the positive to a trigger wire, then the ground to a post!
I do have to agree that adding the wiring would be a GREAT help! Even using the Mopar Auxiliary switches may sound easy to you but us first timers need the extra help. I received a set of Rigid Hyperspots as a present and I'm having a hard time wiring them.
@@CJBroncoF150 Ok, but can you show this? With aux switch?
@@CJBroncoF150Cut switch off, black from switch goes to ground, blue goes to mopar switch white goes to?
CJ Off-Road can you clarify using the JL Aux switch instead of the wire harness switch. The included switch has three wires and I assume one is powering the on/off lights on the switch. The aux switch is only a two wire setup.
How do you wire up the three wires into two
y una vez puestos como bajo el parabrisas las luces estorban para bajarlo no--
tienes razón, la luz limitará que el parabrisas se mantenga presionado!
Cómo instalar el switch dentro del jeep??? Buena pregunta , how to get the switch install
Yeah... wiring instruction would have been great! RC instructions suck!
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
be nice to see the actual wiring and routing smh
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
Lame. This isn't an install video. C'mon man. It's just a commercial. lol
Can you please show how to connect the wire hardness to the Aux Switch?
th-cam.com/video/NO6N0ZcjwZM/w-d-xo.html
The ends for the aux switches are taped together down by your battery. There's 4 of them--2 for big amperage and 2 for small. They also have another set of ends taped somewhere by the glove box for interior stuff.