I see Tri Corp all the time running down the 401, Hammer down and put er in the wind driver. Beautiful Truck & Fleet yall have. I Drive for Robinsons myself all Peterbilt fleet untill they decided to try some new western stars. Proud to be a few hour drive from you boys, see the trucks you do runnin the road all the time.
Man I love the flat top/flat glass kenworths it's a sick truck makes me miss my dad's 97 kw looked almost exactly like that only white he took so good care of it got wash and waxed every week makes me sick to know what it would look like now btw great vid
I Tell You What That Chromed Out 53ft Reefer Spread Axle Trailer With The Black Trimmings In The Background Would Look Crazy Insane With That Badass Kenworth 😎😎😎😎😎👍👍👍👍👍🔥🔥🔥🔥🔥💯💯💯💯💯
@@struedel25 probably not anymore. Pretty sure gliders are now gone thanks to our great Gov't. My last company had over 80 gliders. Can't get them anymore now.
@@adamfrbs9259 Quite possibly correct by now. Kenworth published a paper with the EPA's guidelines on continued glider assembly. Before the EPA 2002 engines, gliders were available to put engines and drivetrains from wrecked trucks into a new vehicle. That market should still exist, regardless of the EPA's regulations. That it does in reality is a different question. Still, according to the EPA guidelines, they still can be assembled with pre-emission engines through 2021.
@@adamfrbs9259 I wish I could find this publication from Kenworth. I read it less than 2 months ago. Essentially until the end of 2021 any assembler who assembled at least 1 glider in 2014 can assemble up to 300 exempt gliders. You can not build your own. Unfortunately I can not find this publication without hours of research.
That looks nice! I'm personally more of a fan of the aerocabs with the studio bunk though. The pointed front of the top of the sleeper just looks so clean right above the a-frame top of the hood.
Got the same set up only thing i cant stand is the smaller sleeper hole stops my seat from going back very far and its really a knee ache really makes me miss the pete
The coffin sleeper and the stretched frame make it look trucker cool. This sounds like it's coming from Canada , I heard they're going to stop the reman cats due to emissions.
Couldn't really catch it in the video, but are the rear fenders axle mounted? Is that a possibility? I was thinking keeping full fenders tight to the rubber at all times and keeping trailer clearance maxed out. Beautiful work
Hello everyone, truck is looking very beautiful! I have a question, is it legal to run with Glider Kit engine in 2020 with this ELD mandating rules. I would like to own a truck with customized Glider Kit engine because DPF and EGR is more problematic, and waste of money for me. Any comments or suggestions.
Beautiful truck! Love the air ride front suspension for the W9 thank you my brutha! All I've seen are Petes with that for the most part. Nice bumper too! Hey where did you get those black hoses from on the Air Cooler? I've been trying to find some but no luck. Those are just what I'm looking for to put on my 3406e. Awesome vid on an awesome truck👍👍👍👍👍
That truck is so beautiful. Almost makes me want to cry.
Literally want to buy a W900 just like it. Very simple classy truck. Black and chrome looks incredible on this project
This could be the perfect truck. It checks all my boxes
That *GRILLE* is *EVERYTHING* !!!
This is very cool KW W900 !!!!!!!!!!!!!!!!!!!!!
Thanks for watching
I see Tri Corp all the time running down the 401, Hammer down and put er in the wind driver. Beautiful Truck & Fleet yall have.
I Drive for Robinsons myself all Peterbilt fleet untill they decided to try some new western stars. Proud to be a few hour drive from you boys, see the trucks you do runnin the road all the time.
bad ass truck its clean and simple.
Good job on the custom body panels
Thanks for watching!
RIGHT
RIGHT TOO
i would go otr again if i got to drive this nice truck man
that is a bad ass w900 there...wow
That is a badass truck!
what a beautiful truck, so many little tricks and details, that bumper trick really blew my mind, lol👌
Thanks for watching!
One radical rig...that grill is sharp! And I love a Cat engine!🤩
Beautiful semi video !
That's how a big Ken supposed to look😍
this truck inspires me to fix my flat windshield more! dope k dub
Man I love the flat top/flat glass kenworths it's a sick truck makes me miss my dad's 97 kw looked almost exactly like that only white he took so good care of it got wash and waxed every week makes me sick to know what it would look like now btw great vid
Thanks for watching!
Super clean rig.
Baddass right there! Time and money into that..
N here I am a boring company driver going down the road at 72 mph. I am thankful though
Nah, you ain't boring, you are as important in the chain as us O/O's. We all get it done, regardless of the truck.
NICE RIDE
STAY BLESSED BRO.LOVE FROM INDIA
Loving the different simple work. So clean!
And here I am wathcing this again 😂 Awesome truck!
I Tell You What That Chromed Out 53ft Reefer Spread Axle Trailer With The Black Trimmings In The Background Would Look Crazy Insane With That Badass Kenworth 😎😎😎😎😎👍👍👍👍👍🔥🔥🔥🔥🔥💯💯💯💯💯
Sweet ride !!!!!! Any current Pictures ? Thx..
Just perfect ,lots of credit
Beeeeaaauuuutifullllllll!!!!!!!
Thanks for watching!
Love the flat glass!!!!
Awesome truck. You guys did a great job
OMFG!!! A unicorn 🦄 😍 💖...Please road God....one day.👏
I'll be damn, I didn't know you could still spec a KW with flat windshields, that's awesome!
Only as a glider.
@@struedel25 probably not anymore. Pretty sure gliders are now gone thanks to our great Gov't. My last company had over 80 gliders. Can't get them anymore now.
@@adamfrbs9259 Quite possibly correct by now. Kenworth published a paper with the EPA's guidelines on continued glider assembly. Before the EPA 2002 engines, gliders were available to put engines and drivetrains from wrecked trucks into a new vehicle. That market should still exist, regardless of the EPA's regulations. That it does in reality is a different question.
Still, according to the EPA guidelines, they still can be assembled with pre-emission engines through 2021.
@@struedel25 all I know is all glider makers were restricted to 300 a year recently, and now that is gone too.
@@adamfrbs9259 I wish I could find this publication from Kenworth. I read it less than 2 months ago.
Essentially until the end of 2021 any assembler who assembled at least 1 glider in 2014 can assemble up to 300 exempt gliders. You can not build your own. Unfortunately I can not find this publication without hours of research.
Wow looking forward great 👍 truck great 👍
that's one sharp truck
awesome truck. be bless driver !
Super cool bumper system
That looks nice! I'm personally more of a fan of the aerocabs with the studio bunk though. The pointed front of the top of the sleeper just looks so clean right above the a-frame top of the hood.
nice!
I have a 05 flat glass. what's really nice about mine is the windshields don't leak like the aerodynes.
Kurt Mays does flat glass mean that it's one piece windshield instead of two?
Cheaper to replace also.
Two piece.
@@sokodad 2 piece, preferred by windshield installers, easier to replace, no glue required, and like Kurt Mays says they won't leak.
818116A 2016 T800 I drive has 2 piece and driver side leaks like crazy in the rain. Shop at work won’t fix it until it breaks again.
I love the truck u guys did good but I have to ask whats with those doors that are cut out ?? Those doors ruin the truck !
I love the standard doors
Awesome job, beautiful. 👍🏻
A lot of money right there folks!
Collin Blubaugh hard work, money dont matter if you have a dream. He shall aim if he decides to.
like how much
Bobby Brown no less than 150K
The truck costs a 150k before the work
Who else was interested in that Pete? It looks bad ass too
Got the same set up only thing i cant stand is the smaller sleeper hole stops my seat from going back very far and its really a knee ache really makes me miss the pete
B E A UTIFUL!
What an absolute beauty. Would choose to spend endless hours with this machine rather that a woman. Great video 👍
The coffin sleeper and the stretched frame make it look trucker cool. This sounds like it's coming from Canada , I heard they're going to stop the reman cats due to emissions.
These trucks are so sick. I think they look so clean lowered down with a sun visor. Black truck is bad to the bone
Kick ass truck.
I would like to see the same thing done murdered out
Yes please I take one!
Love that grill.... awesome KW old school cool man !!!
All of Tricorps tractors are top notch
Best truck ever built
Awesome truck
Nice bad ass trucks you guys build
What's the theme song name
Sweet master piece!..
Really nice!!
Too Flash for our Aussie roads it would get to Dirty to Quick of the road conditions over here Nice truck though great video thanks for showing
im buying a used flat top monday i wonder how much it would cost me to get this set up or something like it
I need that bumper here in michigan for sure
Did you guys have to move anything to fit the drop elbows? I want to do that on my 94
Sick truck guys
Ein Traum 👍
Great job, and you just just nailed the size of the stacks! The way oversized aint that great lookin,,
Beast truck ever
Is that a New true flat top sleeper?? Very nice
flat blk powder coat is the new chrome
I wish we had your trucks in Europe.
I don’t know if he mentioned this in the video. What is the size of the sleeper bunk? Does anyone know?
Looks like a 36
42"
Unrelated question to the truck but what brand is that jacket? Looking for something Similar
Awesome!
Couldn't really catch it in the video, but are the rear fenders axle mounted? Is that a possibility? I was thinking keeping full fenders tight to the rubber at all times and keeping trailer clearance maxed out. Beautiful work
Amazing build. The rear light bar isn't practical for repair. But the flush mount deck plates are🔥
Where can I get those breather light mounts?
OMG NOW THATS A ROOSTER CRUISER
shaaaaaaarrrrrrrp!!!!!
Thanks for watching!
Eric Haley ok
Whose Pete was that next to it? Looked familiar.
Hello everyone, truck is looking very beautiful! I have a question, is it legal to run with Glider Kit engine in 2020 with this ELD mandating rules. I would like to own a truck with customized Glider Kit engine because DPF and EGR is more problematic, and waste of money for me.
Any comments or suggestions.
Im saving up for one of those
best black tractor since robert traylor
How great would it be without playing music while we're trying to hear the rigs !
Can someone tell me the reason for all the stretched chassis trucks? Wouldn’t it make the turning circle heaps worse?
They ride smooth as butter. These aren't rookie rides, obviously if you ride with that wheelbase, you know what your doing
How does the leather end caps hold up on the tanks? Would getting wet not hurt it or are the leather caps sealed?
You've done a really good job there mate 👍
Nothing less than $5.00 a mile to afford this truck
Good luck with that in this day and age. A dollar a mile ain't gonna cut it! 😭
Like it BLAST THE JAKE
Can you put front air bags in a 1991 Kenworth K100?
What was the wheel base on this build?
LOVE IT! Only I would want a bigger sleeper with a SHOWER!
Congratulations
Id choose a KW or PB. How much can i purchase this rig for?
What year did they come out with the Kenworth flat glass trucks
Shes a beauty!!!
I think it's an awesome truck I love the flat glass shows my age
Should ran wires throw mirror brackets .Beautiful truck still
Love it
Beautiful truck! Love the air ride front suspension for the W9 thank you my brutha! All I've seen are Petes with that for the most part. Nice bumper too! Hey where did you get those black hoses from on the Air Cooler? I've been trying to find some but no luck. Those are just what I'm looking for to put on my 3406e. Awesome vid on an awesome truck👍👍👍👍👍
Love the truck just don’t really like the grill would’ve kept that stock
Just curious. What do you do when you gotta chain up with those fenders?
Really nice I'll take one!
Hi. Where its maidet the tuning ? Please
I think i need to change my pants ... Wow that truck is incredible !!
Charles you would need a brand new bag of that high speed chicken feed if you had that ride!!👍👊🇺🇸!
My dream truck