How to Use Oscilloscopes, Logic Analyzers, Multimeters, and More
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2024
- Stop the guesswork! Make the electrical perceptible!
Join Keysight World: Innovate, starting June 20th!
keysig.ht/gwJ0Yk
You can't see electricity (yet) so you need the next-best thing: multimeters, oscilloscopes, logic probes, debuggers, and spectrum analyzers. You know what, forget the spectrum analyzers. You RF people sicken me.
Join our friendly maker community at / discord - It's friendly because my mods punted all the jerks out the window like that scene in Kung Fu Hustle.
Support me and make me say dumb stuff! / zackfreedman
Keysight sponsored this video and loaned some of today's gear, including:
- 33600A signal generator: www.keysight.com/us/en/produc...
- DSX1204G oscilloscope: www.keysight.com/us/en/produc...
- N2795A 1GHz active probe: www.keysight.com/us/en/produc...
- N2756A 16-channel MSO cable: www.keysight.com/us/en/produc...
My personal gear:
- Fluke 87 multimeter: Buy an old used one! Mine is almost 30 years old.
- Miniware DT71 tweezer meter: amzn.to/3NpYyWs
- Voidstar x Keysight PimpScope™️MLG42069: • The World's First Pro ...
- Saleaaeeeaeaeae Logic analyzer: amzn.to/3X8I5cD (Mine is an older model)
- Dangerous Prototypes Bus Pirate 3.6 interface tool: amzn.to/45Whxzm (consider getting the newer v4 instead)
- Segger J-Link EDU JTAG debugger: www.segger.com/products/debug... (I never actually used it in the video, don't sue me)
- Nooelec NESDR Nano 3: amzn.to/3qBPu88
Timetable:
00:00 - 01:57 Why Tools Matter
01:57 - 03:15 Thanks Keysight!
03:15 - 03:55 Meet the Meters
03:55 - 08:52 Multimeter
08:52 - 19:55 Oscilloscope
19:55 - 22:16 Logic Analyzer
22:16 - 24:05 Debugger
24:05 - 25:30 RF Tools
25:30 - 30:01 Summary + Thankies
(Thanks Cornelius Rosenaa for preparing this!)
Credits:
Interference SFX: Partners in Rhyme
Castle Thunder SFX: Sound Ideas
Other SFX: zapsplat.com - แนวปฏิบัติและการใช้ชีวิต
Yes on the debugging, I know videos like this aren’t as popular as the “I made a Wi-Fi solar powered diddler for Mr. Beast” videos, but they’re vastly more timeless and valuable.
With solar powered diddlers, I think the benefit of solar power outweighs the negatives of the neighbors calling the police.
Hey! solar powered diddler's are important!
given the choice I would definitely prefer the debugging video! but uh... why not both?
Go evergreen baybeeeee
Yes.
Making someone suffer "just because I had to" is the most toxic of passing the buck in academia, anyone who willingly educates the next, and does so to reduce suffering, is a hero! Thank you, sir!
@Jeremy Thurman True, /and/ experience-based learning can be separated from that mindset of, "just because it sucked for me, it should suck for you"
@@clintmilner2365 I agree to a point. The way we learn is from our failures and a big part of lab work in the engineering curriculum is fucking up. That's the "this sucked" part imo.
@@zoumeyz2984 I think what he refers to are people who try to force analogue scopes on newbs so they learn to read the measurement from the grid. I have met this particular thinking before and it makes no sense for me. Any modern device even the cheapest 200usd garbage from aliexpress can read and tell you the measurement and you don't have to count it on the screen. It simply no longer adds value. If it would then people would use those old scopes and still count the grid.
Other example when I went out to buy a telescope for myself and some old chap tried to stop me from buying anything that is motorized or computerized. He insisted I have to learn paper star charts and "starhopping". No dude, be happy counting stars I want to focus on the results.
@Jeremy Thurman yep, both of yall are on point :) we learn through our mistakes, but needless suffering "just because" doesn't encourage growth
Finally sitting down and watching this. It was intimidating but it's a great video and I should have just watched it when it first came out because you did a great job
100% yes to the debugger! My electronics repair career was a victim of the advancement of throwaway devices (I did tv repair, all the way from tubes to Oled), so I have firsthand experience on seeing that skillset disappearing. The more knowledge we can get recorded, the better!
With the way the economy is going coupled with pending trade wars, I can see your skills being needed again.
@@caribeskinner6290 this is exactly why i'm studying eet in school, i plan to repair and reuse all sorts of electrical stuffs
6:50 you actually can get current clamps that can measure DC. I believe they use the the Hall effect to measure the static magnetic field produced by the current. The uni-t 210 is a great little meter including the dc current clamp, I’ve used mine for like 5 years now.
Yes, but they need to be used carefully because ambient magnetic fields can throw off the readings. Zero the clamp every time!
Yes, they work similarly to the current measuring chips you can get to use with microcontrollers, except they need connected into the circuit but what it does is just have a thick current carrying trace very close to a Hall effect sensor.
Paused to make the exact same comment. The effort of having to be cautious about zeroing is more than made up for by being able to measure higher DC currents (that the small-ish gauge test leads have too much resistance for) and not being able to blow any fuses by leaving the meter setup for current probing (which is easy to do when impatiently troubleshooting a bunch of different measurements).
I was going to say that while I was watching this video. DC clamp meters are easier to find these days as well.
One tip worth mentioning is that the multimeter can measure the difference between two voltages, but the oscilloscope cannot unless you have a specific differential probe. The ground contact of an oscilloscope probe is directly connected to the earth ground of the outlet. Many accidents have occurred from people putting an oscilloscope probe in the power outlet and connecting the ground of the probe to the neutral or live wires.
The Oscilloscope is actually so much simpler than I thought it would be! Awesome video, this definitely makes all these tools feel a little more approachable to try!
At its most basic level, it really is pretty simple. The complexity comes in in two forms: The interface typically has a TON of buttons and knobs that look intimidating, but it's really just so that everything has a dedicated control and you don't need to switch between things, and secondly most scopes have a lot of additional abilities not even mentioned in the video that can be tricky to fully grasp, and aren't always really clear from reading the manual. But most of those features are super niche, and you will know you need them when you need them. Once you understand the basics, it all makes a lot of sense.
I still like having a decent analogue scope in my kit tho. There's a lot of information in the 'feel' - like using moving coil multimeters. The needle balistics can tell you a lot.
@@nikthefix8918 analogs are always more beautiful
voidstar lab days are always good days
Absolutely would love a debugger video!
Also, your printing with every filament video(s) are literally something I reference on a weekly basis when pointing people new to 3D printing to useful resources, so this is definitely not the first edutainment video, but it's still a great one!
As someone who specializes in troubleshooting and component-level board repair of metrology and test equipment (both professionally and for fun.)😁.
I would love to see you do a video series on more affordable test equipment. Myself and others are lucky enough to work with really nice high-end stuff but there's a huge niche and interest among hobbyists (and even professionals).. To examine and exercise the new and affordable dirt cheap test equipment. It really is a golden age for test gear and tools... That allow hobbyists to own equipment they could have never had even just a decade ago. So it would be awesome to see you highlight some of those more affordable tools, and explain how to use them clearly.
I enjoy working with oscilloscopes that cost more than a house... Don't get me wrong.
But I'm im fascinated with the engineering and execution in these cheaper designs. And more often than not find myself poking around inside of the new cheap equipment constantly. If nothing else just so I can have some cheap stuff to blow up if I'm in a sketchy situation, or to recommend for younger folks going through school, or getting into electronics.
It's a golden age and it's incredible what has transpired for dirt cheap test equipment. Most of which is mindblowingly good quality and functional for the price. Everything from rigol scopes, feeltech function gens, and even aneng handheld meters. There are so many impressive tools available these days
PS... I'll never forgive you for what you did to that poor oscilloscope. 😂
Yes; a debugging video would be awesome. I'd rewatch the crap out of it like I do the Gridfinity one to bump the metrics.
Yes on the debugging video please! There are some cheap hand held oscilloscopes are around but they are often low bandwidth or a bit quirky. The Eeblog channel(s) you linked to have some cool teardowns of different oscilloscopes.
I know this video didn’t performed exceedingly well but this content is totally incredible and honestly even as someone who completed an entire computer engineering degree, I did learn something. Please, even if it’s on a separate channel or maybe just for patrons or something, this content is super important.
3:59 I’ve had that Fluke for probably 30 years. Can’t beat it for function. And I just got one of those tweezers two weeks ago. Most amazing thing ever. I can now check my clear LEDs faster than anything, let alone all the other functions it does. Fabulous tool!
If it's good, it's a Fluke!
At 300+ euros. HOT DAMN!
I loved your sensible no-BS explanation of how an oscope works. I have an oscope and I mostly-know how to use it, but the way that you described the time offset actually taught me something new and helped me to understand why, if I adjust the time-offset after already capturing a signal, I can't just see more of the signal that came after the time offset! Thank you! 😄
I also wanted to say that even though this video didn't preform well, I really enjoyed this video. You obviously are allowed to make whatever you want, amd what ever you feel is best for you and your channel, but I just wanted to point out that should you desire to make more of these sorts of vids, there is certainly an audience... smaller, but an audience. Thanks for the great videos
I love how the Fluke debounces continuity testing. Whether a brief break in continuity or a brief short, the meter converts the short event to an audible sound of longer duration you can’t miss!
Couple of extra tips!
if you have more probes than what you need to use you can use the gnd clamp from the extra probe as your ground freeing up your main probe and you can connect the gnd clamp to the probe tip do make a sniffer that easily can pick up high frequency signals such as the VCO in a HAM radio.
FYI, you can get DC current clamps. In those, a hall effect sensor picks up static magnetic fields.
It's been so awesome to learn from Zach. I'm sure he gets it all the time but to inspire me to be better, finish projects, and really enjoy the process has changed my life. Thanks Zach ❤
Hi Zack, I watched this video when it came out and really liked it. So I came back again to leave a loving Comment Of Engagement after hearing it didn't do so well. It deserves more love!
I've spent way too much time trying to get debuggers to work with my arduinos and dsps and the likes, and it was so painful that I decided to use serial println instead because it was more convenient.
so yes, if you made a video about microchip debugging, I'm all here for it!
What a wonderfully useful episode, thanks for this one Zach!
I appreciate the shout out. My lack of balls has been remedied.
A video on debuggers would be so great! As a new media major turned programmer, I’m comfortable with a debugger, but not when there’s some assembly required. I’m currently like six rabbit holes deep on getting my Adafruit Feather RP2040-based music player project working, and the available tools are a teetering mountain of hacks. And once I got gdb actually working over a J-Tag Mini, I didn’t really even know what I was looking for. What are the failure modes of Arduino-compatible hardware? No idea. Enlighten us, oh alliterative one!
Ah yes, the video that saved you a house
I’m excited for a “new lab” tour
This is really helpful... Logic analyzers are new to me, and this was a very accessible intro. Thanks!
Big yes on the debugging video. Your style that makes your maker videos completely engaging is perfect for educational videos
Here to show this video some love, I learned a ton and as soon as I get back into circuits as a hobby this will be absolutely invaluable. You really did a great job demystifying oscilloscopes!
Yes to the debug tools, I have a bus pirate and it baffles me. I start using it, then I give up, then I get annoyed that I gave up. Then I usually do something stupid like roll my own solution and I swear the bus pirate just looks at me with the side eye of 'you know I could be doing that a WHOLE lot easier, right?' and I know, I really do.
The benefit of using the probe spring is that it uses a ground closer to the signal you are measuring and, very importantly, it presents a much smaller “loop” and will so will pickup less noise from elsewhere in the circuit (e.g. a switch more buck converter).
A lot of this sort of stuff is way beyond me. I’m at the “follow someone else’s project and if it doesn’t work and I can’t find something I did wrong, move on” stage. BUT it’s still nice to learn about and I like the cut of your jib, so I’d like to see more vids like this sprinkled in.
Thank you for this content Zack! You have an excellent way of explaining and breaking things down. Love all your videos! All the best mate
Make videos on all equipment! I have been using o-scopes professionally for quite some time, I learned a lot today. Had I seen this video 10 years ago, I'd be a better engineer. Please keep this series alive. ❤
Yes please! I'd love to see an in-depth debugger video! This has been an excellent video and a great reference :)
big yes on the debugging, and its good that you called us out for not watching this, because it reminded me to come back and watch it! This was great as always!
This is such a huge help to me! I wasn't finding any great videos on how a multimeter works and when to use the functions. Thanks man!
I actually think that rigol is basically keeping their devices really hackable for a reason, cause their biggest market is schools and stuff, which won't hack their scopes anyway, and will rather pay the full price for all the software features included. And it being hackable makes them a really good choice for makers like us, cause you get a lot of hardware for little money.
Exactly, they make their money off of actual businesses and education. The small number of scopes they sell to hobbyists isn't moving the needle for them. But also, some of those hobbyists may also work for companies that buy these products, and they might recommend that the company buy the brand of scope they are familiar with, so that can lead to real sales at full price.
my dude, desperately needed and well executed. Keep it coming.
I didn't understand most of that, but it was downright entertaining anyway! Thanks Zach!
I needed this topic covered in an entertaining way. I have been stuck on my first project debugging for 2 weeks!
Timestamps so people can jump to their relevant sections
00:00 - 01:57 Intro
01:57 - 03:15 Sponsor
03:15 - 03:55 Rundown
03:55 - 08:52 Multimeters
08:52 - 19:55 Oscilloscopes
19:55 - 22:16 Logic Analyzers
22:16 - 24:05 Debuggers
24:05 - 25:30 Spectrum Analyzers
25:30 - 25:55 Get quality tools!
25:55 - 30:01 Outro
Thank you! I've added this to the description so they show up on the video itself.
@@ZackFreedman For the timestamps to show in the progress bar of the video, you need to only list the start of each section.
@@ZackFreedman no problem, I'll probably be one of the ones using this the most lol
Yes, please. More videos about debugging, troubleshooting, tool use, etc.
Already knew how to use a scope, but loved this video. Will be referring makerspace folks to it for tutorial. Would love to see more of these.
I went to school for automotive technology and we had to supply our own tools which included a fluke multimeter. The first day of the first electrical class, we put a blade fuse holder inline on our positive multimeter leads. If you accidentally had it in current mode, it would pop the inexpensive and now easy to replace blade fuse instead of the internal fuse.
Well done. Great summary.
This video was incredible. I came JUST to give it a thumbs up and click a few buttons when you'd mentioned it didn't do well.
It seriously is something I want to use at work to reference for training.
Thank you so much, Zack!
First, I have learned A LOT, you've answered so many questions I've always had and even more I never knew I had (I'm not an electrical engineer even as a hobby). You've enriched my world immensely, with your well-structured and very easy to ramp up insightfulness.
Second, I was very surprised to hear in the first minute about the "invisible nature" of electronics, lack of observability provided by mother nature (sharks could be better electrical engineers, maybe?) This narrow feedback bandwidth is what I'm working on a lot these days, in a different field, where it's even harder (electrical engineers have it easy - stick your multitool probe in and you see SOMETHING).
hey you from the potential sponsor - HEADS UP! - despite skipping literally all sponsored segs in all other content, i actually listen to Zack's because he's that much fun to listen to
I know this one didnt do as well as the others, but I really, really enjoyed this, and there isnt enough stuff like this on the web.
ADHD Tech youtube is such a blast! You’re one of if not the only creator i watch on 1.0 speed and i respect you madly for making me have to do it!
I would love to see more in depth video on each of these tools.
dude this is insanely useful, I'm a gearhead and have dodged learning about a lot of this stuff and this has been a very informative video!
I hope this isn't too late. Yes please to the debugging video. You're educational style works to keep my brain interested! Thank you!
11:52 "You're probably building digital electronics..." Zack, it's like you don't even know me!
Imagine being so early, that TH-cam still has to process the video...
Great stuff man, keep it up!
For (very) basic wireless: A really cheap and hacked together option would be to use a "wand" probe attached to a wide-band signal booster that feeds into your O-scope in FFT mode. Use this configuration frequently when looking for damaged SMDs on the precision instruments I work on. It basically just picks up on increased activity in a broad frequency spectrum, but it does tell you what frequency and that's good enough to trace a clock signal.
Please on the debugging, love most of your shiz but the deep dives are my favorite. been waiting for an o-scope video for a while!
Yes please on debugging, I'm trying to step up my electronics game cause i've learned so much about electronics from youtubers but I feel like i'm capping out so I'd be so stoked for more specific content.
God the patron read only ever gets better and better. Definitely have been putting off upgrading my ee game.
I always notice “good succ” in the list lol
This is great maker content, thanks maker man!
Very cool to see and understand how scopes work.
As I definitely never knew how to use one, even though I knew they are useful, but was always wary as I thought they were too complex or easy for me to mess up the circuit or scope
Be encouraged @Zack Freedman. I know content didn't go huge, but it's evergreen and my self and many others will keep coming back to it.
THANK YOU FOR MAKING THIS I NEEDED THIS
I WANT MORE TUTORIALS AND HOW TO LIKE THIS!!!
Great Video!! love you zach keep up the great work brother
Funny for how long Keysight has been a sponsor that this hasn’t been made before. Though I have a feeling them being a minor hero in the apartment story was the kick in the butt you needed to tackle it (on top of actual debugging)
Thank you for this tutorial. It's always cool to learn something new.
I would recommend getting a cheap interchangeable set of multimeter leads, they are good enough for hobbyist use. The ones I have come with screw in tips, things like normal multimeter tips, different lengths and thicknesses of tips and one of my favourites: tips with concave ends, the concave ends are perfect for sticking on the top of a microcontroller pin and since they are concave they don’t slip off, it makes working with any kind of pin much easier than trying to hold the tip against the side. My set also came with banana plug tips, both pointed (more useful, pretty much just a spike on the tip) and rounded, with attachments that plug onto the banana plugs, like crocodile clips or the U shaped crimp connectors. It also came with short and stubby tips with a lot of insulation on them, I think they are for mains screw terminals so they don’t have any exposed metal and are just long enough to probe the screws.
The ones I use the most are the convex tips, the crocodile clips and the spiky banana plugs since you need them for the crocodile clips and the spiky end can be used just like a normal multimeter probe.
It is far easier if you use a tip that is well suited for what you are doing and will save you a lot of time and frustration, the screw in tips and similar don’t add enough resistance to matter (it is often indistinguishable from the stock probes) and are definitely good enough for most uses.
I started college as an aerospace engineering major. Sometime in my first week of school, a EE student a couple years ahead of me told my group something to the effect of "if you haven't decided on a major yet, don't pick EE. It sounds cool, death rays and stuff, but it's actually dark magic and impossibly hard. Pick something else." I ended up as an electromechanical engineer (oversimplification: mix of mechanical and electrical engineering), and can confirm that he was 100% correct. Electrical engineering is indeed dark magic, and impossibly hard, and I wish I could have just been pure mechanical.
absolutely would love in depth videos on debugging
I found this very useful, I've got a scope and logic analyzer, but little knowledge on how to use them effectively. Thanks!
9:16 and are beautiful pieces of vintage test gear.
This was so over my head, but just hearing funny smart people words was entertaining enough to keep watching!
You are just doing a great job man. Keep it up. Solid Content. Thank you!
Thank you for making this video! This information is super valuable to new engineers and tinkerers
10:56 60Hz ghosts, the least exciting type of ghost.
In case anyone was wondering, the supporter name with all the numbers translates to "pla is life" in ASCII. Awesome video!
pla...like the 3D printing filament material?
"You're building entire projects on sheer guesswork" -- ahh, certainly describes my experience this week :D
YES to the debugger. Yes to videos helping explain how and what. Yes continue.
Yes a debugger vid would be super helpful!
Thank you for creating a video for people that already know how to use an oscilloscope.
Dude, glad yr back!
thank you so much for this knowledge and encouragement
I loved this video. Keep up the great work.
Great video, thank you for making this up!
Yes!! Please do a video on the debuggers!!!😵💫
Big yes on the debugging!!
Fantastic video! I’ll be re-watching once I get a scope.
Would absolutely love a debugging video!
One of your better videos my friend, keep these coming. Make me a better - school of hard knocks engineer!
Babe wake up new Zack freedman dropped omg
This is exactly what I needed!
Easily top 5 youtuber. Up there with this old Tony and Tested. Stay awesome Zack
One safety thing about scopes: if your circuit is referenced to mains earth DON'T CONNECT 1x or 10x ground clips to anywhere in your circuit if it isn't isolated . Doing so will create a dead short from your probed point through your scope, and that dinky ground clip cannot handle that kind of current and will vaporize in your hands.
This really broadened my scope of knowledge!
I really enjoyed this. Thank you, it was very funny and helpful ☺
Awesome video zack
So much yes on debugging!
For the O-scope, get at least 2 channels (3 is the sweet spot for me); usually if you need more than 3 on a project you designed yourself, you're dealing with digital signals, so a logic analyzer is a good idea. At work, I was implementing the USB device stack software for an FPGA based project, and it took a USB analyzer (Beagle), an O-Scope (determines if the signal is of sufficient quality) and logic analyzers (need to look at what passes between the USB device controller ("Link") IP block and the USB PHY ("Transceiver") over the ULPI bus. For the most part on this project, we used the Xilinx ILA as the logic analyzer, but had we not had that, we could not have diagnosed a bug in the USB device controller IP (VHDL) implementation that we had licensed from a third party.
I'm an actual electronic engineer, so I know all this sh*t. But you're so damn compelling, I watched it all anyway. :D
25:16 bold of you to assume I can choose between those