As I've got a 2017 5k iMac, I'll do this in a few years when it stops getting security updates. I've been checking out a bunch of folks videos for doing this and yours is by far the best. So nice to see you use the speakers, built in power connector, and use a grommit on the ram door for a super clean look. Also, major props on the lead weights. All told this is a great build. 👏
I like that you made the original power port and power button that’s a huge difference and having a remote to adjust settings not having to make holes for buttons. Nice build great way to upcycle products for the long term.
I've been thinking about a full kit to provide faster or easier install or even a fully done option for a few years now. But.... Time.... And... Money.... When I did my 1st in 2021 I did the power cable and the power button the same way. I mounted the power supply in the same spot but the board above the hinge and that required no extra weight. I also wired an IR sensor to the button board and had it peek through where the oem camera lives so remote was easy to use. Lastly, I've never used the crossover kit, but I have seen that some are shipped with some of the wires reverse polarity so that can cause highs to sound rough. As for the buzz it can come from being so close to the other components like the board and especially the power supply. A ferrite bead around the wire coming off the main board could help. There are other isolation methods, including a separate digital amp, but most importantly distancing from the other electronics and creating some actual shielding. If anyone wants to chat about the possibilities of all this I'm open!
This has been by far the most clean iMac standalone display i’ve ever seen, the back is so clean and pristine, barely looked modified-wow Great job!! I’m tempted in doing this too
I've just finished mine using your video for the instructions, and it worked like a charm! The only thing I haven't managed to do it is the hole to pass the cables into the RAM cover. Also my logic board doesn't have a remote so I had to keep the controls outside. Great video and thanks for all the details!
Awesome! When I was 13, in 1967, I first saw headphones at a department store. It wasn't long until I ripped the speakers from 2 transister radios, hard wired them to a record player, stuck them in a couple of ashtrays, and strapped them to my head with a belt. Would have been nice to post it on a TH-cam channel back then! I tip my hat to you sir!
I’ve been considering this! Looks really great, nice job! Using the original power button was nice. Maybe you could add a led color strip on the back to make it “next level”
This was impressive. I never expect a power brick to be shielded well enough to avoid magnetically distorting the display in some way. I guess that's naïve. :)
Have this exact iMac, Late 2014 27 inch. Thinking of doing this conversion + replacing the camera for a smaller, higher resolution Arduino camera for robotics. Easily could get another 4-5 years of use out of the display, insane value for the price. High quality video man! Hopefully you were able to sell some of the parts.
You could probably make 3d printed brackeds that go over the mount points within the shell to help hold those items in if you didn't want to use hot glue
Just note these 5k iMacs will all suffer from the purple haze effect as the glue that holds on the glass display will change colors giving it a purple haze effect around the edges of the display. Also for some reason, the LG LCD displays have image retention issues which can be fixed with a Reddit search. I just about have the same model as yours running OCLP and it otherwise works fine as a daily use machine.
Can you tell me what two video cables you attached to the video board that come out of the Ram access door? I am planning on using the new 2024 Mac mini that is coming out this November with the M4 chip. Lastly how and where did you mount the small push button pad that is connected to the video board by the ribbon connector Thanks!!
I love this. I will do it. It would be awesome if someone made a custom minimalist back (chasis) for this 5K panel. Even better if it already had the power supply and controller built in, without the lower aluminum band.
Well done . I wonder if they make something to convert the camera in the screen to USB so that you have use of that also. Excellent how you got a kit for the speakers to work too. Excellent 👍 and of course you have a camera in your other system there so the need for the camera to work isn't necessary. So you have a awesome set up there.
Awesome vid! Another way can use an outdated iMac that does not get the security updates anymore/OS end of life is using a capture card like El Gato 4K X and do not use the iMac on the internet just use it as monitor using OBS Studio software which is free set full screen scene its an easier and less expensive route as well less work.
Hi, thanks for sharing this great project and encouraging me to recycle my iMac. It isn't obvious if you got the speakers working and whether the sound is any good or not. Can you confirm ?
Very nicely done! I am planning to do this myself as i have a 5k iMac already. Can i ask what model graphic board did you buy that it allows you to use the iMac inbuilt speakers please?
Fabulous job the instructions are so clear even I think I might be able to do this to my 2009 iMac but I’m not sure if if that year will be able to be used to like you’re using your 2014 but shoot you did a great job 🎉!
Very interesting and impressive project. I‘m wondering what you did with the speaker crossover divider you also bought? You didn‘t install it? For what reason?
Great video! Motivated me to try myself but having an issue where the input display isn't centered. Did you have that issue or know how to fix? Not seeing anything in the display settings to correct. The image is centered on the side of the screen.
Very Nice, thank you for this excellent video. In the beginning I see you have an old 27” Thunderbolt or Cinema Display. I also still have that, but the panel inside is getting old and dark. Do you think I can buy a used 2017 5K iMac and put the 5K panel into the housing of the Thunderbolt/Cinema display using the same parts and technique you use here? I would love to keep the fantastic Apple display housing! Any ideas/hints would be greatly appreciated 🙏
Hi. Great vid. Since the seller doesn't offer the remote anymore with the kit, I was wondering if its needed from the project. I want to do this to an old 2017 5k as well.
would have been nice to know how much did all the accessories cost? And what is the total cost of conversion versus a different external extended monitor?
I've always wanted to somehow liberate the display of the Microsoft Surface Studio. It's a beautiful display unfortunately tied to an obsolete computer...
Eeeeuuuuh, a 2014 27 inch iMac as monitor would work by just installing OS Sierra, then connect through thunderbold as display? Tell me if I am wrong of course.. ...clean conversion though. I know this is quite some steps and getting it right needs a good amount of attention and care. Top!
I bought a luna display. There is no need to destroy the iMac. I mainly work in FCPx, I can render two projects at the same time. Of course, iMac is slower than Mac Studio. There are many uses for having a Mac Studio and a functioning iMac at the same time. Best of all, Luna Display costs only $79
Can you provide an update? How is it working out? Are you pleased with the picture compared to your iMac? There is a reference to 8bit color, have you noticed a difference compared to the iMac? Is the board that you installed reliable? Overall, was it worth it? Thank you for your response. Great video!!
Thanks for watching! Its working great! The picture quality is identical to my iMac. The color are a bit different, which could be tuned to match better, but it doesn't bother me, so I haven't taken the time to do it. The board has proved to be very reliable, I use the monitor everyday. I think it was worth it, I am very happy with the outcome.
@@RunYoungShoots Thank you for your response. I just retired my Late 2015 iMac and, thanks to your video, plan on turning it into a 5k monitor for my new Mac Mini. Parts are ordered!!! Thanks again!
Is it possible to use the iMac with the own screen but through the panel via cable? Can the iMac use with external display after the own screen been removed?
No, the manufacturer does have a higher end board with a fan (more complex board), but this version is fine without one. I have not had any overheating issues.
It might be too late but this is an inexpensive way to deal with the hinge not working properly and not having to put lead in your Imac: iBofans Repair Replacement Hinge Broken Solution
How did YOU do that with the cover, I mean with the service hatch where the cables for the DisplayPort come out? How did you get the hole with the grommet in there? Or did you buy a new cover?
@@RunYoungShoots thanks for responding. I'm contemplating this project and was wondering if color profile would match my workflow. I'm a pro photographer and use Photoshop and Lightroom a lot. I love apple displays but prefer working on PCs. It's always a lot of hassle to make it work properly.
Hey nice mod was thinking of doing the same since I can't find a good condition Thunderbolt Display and this is 5k anyway. Was wondering how did you do the power button like which wires from the switch board did you cut and solder to the oem power button. Also do you still have access to the other ports in the logic board or did you just not think those ports are needed. Also how is the display for other non Mac stuff, was thinking this would be good for a game console or a steam deck. Thanks!
Hey, thanks for watching! The two wires I soldered were the last two from the controller board. I don't have access to the other ports, for me there were not necessary. I have not tried it for non Mac stuff, but considering that its a Dell controller board, I think it will work well! I am not much. of a gamer, but keep in mind these displays are 60Hz, so not the highest refresh rate.
Very cool I also want to do this, already got a iMac late 2015. I now wait for the video board, I want to ask why 2 display ports, I gonna use the iMac as a primary display for my MacBook Pro 2021, do I need there also two display port cable to connect or just one? Nice video and channel I subscribe you, thanks for video Greetings from Vienna
I’m doing this
My god. Can't believe you watched my video, thanks!!
damn SMG, you flying to small channels too?
Test
Probably the best value of those 5k iMacs was the screen. Awesome that you were able to reuse it so neatly.
Thank you! Yes I agree, practically the same panel that is used in the new Studio display!
That was the only reason Apple separated the screen from the computer on the 27" so they could charge more!
What did you do for ports?
As I've got a 2017 5k iMac, I'll do this in a few years when it stops getting security updates.
I've been checking out a bunch of folks videos for doing this and yours is by far the best. So nice to see you use the speakers, built in power connector, and use a grommit on the ram door for a super clean look. Also, major props on the lead weights. All told this is a great build. 👏
Thanks man!
This was one of the cleanest retrofits I’ve seen. Great job.
Thank you!
I like that you made the original power port and power button that’s a huge difference and having a remote to adjust settings not having to make holes for buttons. Nice build great way to upcycle products for the long term.
Thank you!
You did the best job on you tube that I’ve seen. Wish I could just use my late 2015 27” iMac with the new 4M Mac Mini without all the conversions.
I've been thinking about a full kit to provide faster or easier install or even a fully done option for a few years now. But.... Time.... And... Money.... When I did my 1st in 2021 I did the power cable and the power button the same way. I mounted the power supply in the same spot but the board above the hinge and that required no extra weight. I also wired an IR sensor to the button board and had it peek through where the oem camera lives so remote was easy to use.
Lastly, I've never used the crossover kit, but I have seen that some are shipped with some of the wires reverse polarity so that can cause highs to sound rough. As for the buzz it can come from being so close to the other components like the board and especially the power supply. A ferrite bead around the wire coming off the main board could help. There are other isolation methods, including a separate digital amp, but most importantly distancing from the other electronics and creating some actual shielding. If anyone wants to chat about the possibilities of all this I'm open!
Sounds like a great build!
This is awesome. Thank you for sharing.
It would be great if you could integrate the camera also.
This has been by far the most clean iMac standalone display i’ve ever seen, the back is so clean and pristine, barely looked modified-wow
Great job!!
I’m tempted in doing this too
@@iminacatsuit Thanks!
love that cable job at the back.
Thanks man!
Awesome build, especially with the original power button. But how did you know which cables you had to solder to the button?
I've just finished mine using your video for the instructions, and it worked like a charm! The only thing I haven't managed to do it is the hole to pass the cables into the RAM cover. Also my logic board doesn't have a remote so I had to keep the controls outside. Great video and thanks for all the details!
Awesome! When I was 13, in 1967, I first saw headphones at a department store. It wasn't long until I ripped the speakers from 2 transister radios, hard wired them to a record player, stuck them in a couple of ashtrays, and strapped them to my head with a belt. Would have been nice to post it on a TH-cam channel back then! I tip my hat to you sir!
Would be really interesting to get the panel inside of the old Thunderbolt display housing. THAT would be AWESOME
nice. using an old 5K iMac he took out the guts and got a new controller/power and was able to turn an iMac into just a display. Cleanly done!
Very professional job! I've watched a few videos on this conversion and this was more detailed, clear and well executed than anyone elses. Nice job!
Thank you!
This would be cool to them also convert to a vesa mount.
Very helpful video, I think I might do this with old 27inch retina display
Thanks, Its a great option!
Its such a nice monitor. Great job but still above my skill level and patience. Its too bad, one cant just plug it in and it works.
I’ve been considering this! Looks really great, nice job! Using the original power button was nice. Maybe you could add a led color strip on the back to make it “next level”
Thanks man!
Very nice and clean. Thanks for sharing 👍🏼 👍🏼
This was impressive. I never expect a power brick to be shielded well enough to avoid magnetically distorting the display in some way. I guess that's naïve. :)
Thank you!
Your set up is exactly what I want to do. Two 27” iMac 5k connected to an Apple Studio computer!
Have this exact iMac, Late 2014 27 inch. Thinking of doing this conversion + replacing the camera for a smaller, higher resolution Arduino camera for robotics. Easily could get another 4-5 years of use out of the display, insane value for the price. High quality video man! Hopefully you were able to sell some of the parts.
@@risley.ogembo Thanks for watching!
@@RunYoungShoots Quick Question: Does the display support apple silicon macs as well?
Neat build, will do this with my 2017 imac when i get my 14 " Macbook pro
You could probably make 3d printed brackeds that go over the mount points within the shell to help hold those items in if you didn't want to use hot glue
Just note these 5k iMacs will all suffer from the purple haze effect as the glue that holds on the glass display will change colors giving it a purple haze effect around the edges of the display. Also for some reason, the LG LCD displays have image retention issues which can be fixed with a Reddit search. I just about have the same model as yours running OCLP and it otherwise works fine as a daily use machine.
Yes my actual computer a hue of pink and some ima,ge retention issues. Quite unfortunate. Luckily the monitor I converted does not.
Can you tell me what two video cables you attached to the video board that come out of the Ram access door? I am planning on using the new 2024 Mac mini that is coming out this November with the M4 chip. Lastly how and where did you mount the small push button pad that is connected to the video board by the ribbon connector Thanks!!
wonderful idea, thanks for sharing your video
I love this. I will do it. It would be awesome if someone made a custom minimalist back (chasis) for this 5K panel. Even better if it already had the power supply and controller built in, without the lower aluminum band.
Thanks for watching!
Man, you did an awesome job. Two thumbs up!👍🏻 👍🏻
Would it be possible to let the microphone also work on the former iMac? Brilliant work by the way.
Could you drop links to the items you purchased? Great DYI
Thanks!
Adhesive and Roller Tool:
www.aliexpress.com/item/1005003776361300.html?spm=a2g0o.productlist.main.9.15e76abbamYMNQ&algo_pvid=2e51d06b-fe7b-4c41-b871-de3e78ebd672&algo_exp_id=2e51d06b-fe7b-4c41-b871-de3e78ebd672-4&pdp_npi=4%40dis%21CAD%217.58%215.31%21%21%215.50%213.85%21%402103277f17060766830348998e1f37%2112000031374651115%21sea%21CA%210%21AB&curPageLogUid=BNlpDrdfRbtD&utparam-url=scene%3Asearch%7Cquery_from%3A
Logic Board:
www.ebay.ca/itm/165959752487?var=465459649479
Power Supply:
www.ebay.ca/itm/155900624046
Speaker Crossover Kit:
www.ebay.ca/itm/166098261769
Trackpad Cover:
www.aliexpress.com/item/10000214078180.html?spm=a2g0o.productlist.main.1.7e8a15c9ffWI0n&algo_pvid=5d91b012-322a-4e22-beb3-332eae24b3da&algo_exp_id=5d91b012-322a-4e22-beb3-332eae24b3da-0&pdp_npi=4%40dis%21CAD%2113.11%214.58%21%21%219.52%213.33%21%402103247017060769447823563eaf7b%2112000027029036649%21sea%21CA%210%21AB&curPageLogUid=MUhCYB2V7cGB&utparam-url=scene%3Asearch%7Cquery_from%3A
Solid DIY
Thanks!
maybe you can use the old internals like some sort of apple tv if they still work, maybe 3d print a custom case for it too
this was sooo cool. But why didn't you just use target display mode from the working mac to the old one and use the old one as a display?
I’ve considered this as an alternative to AAPL’s high-priced 5K display.
You should get an M3 Mac mini and stick the internals in there!
I might try that!
An excellent job, very neat, well done!
Well done . I wonder if they make something to convert the camera in the screen to USB so that you have use of that also. Excellent how you got a kit for the speakers to work too. Excellent 👍 and of course you have a camera in your other system there so the need for the camera to work isn't necessary. So you have a awesome set up there.
Thanks for watching!
Awesome vid! Another way can use an outdated iMac that does not get the security updates anymore/OS end of life is using a capture card like El Gato 4K X and do not use the iMac on the internet just use it as monitor using OBS Studio software which is free set full screen scene its an easier and less expensive route as well less work.
Hi, thanks for sharing this great project and encouraging me to recycle my iMac. It isn't obvious if you got the speakers working and whether the sound is any good or not. Can you confirm ?
You are so smart! I would never be able to do this though 😔
Hey man, take your time and follow what I did in the video, I’m sure you can get it done! Thanks for watching!
Great video! In the process of the same project. How did you know where to connect the 2 wires to integrate the OEM power button?
Thanks! I had to inspect the circuit board closely, its the last two wires on that harness.
Very nicely done! I am planning to do this myself as i have a 5k iMac already. Can i ask what model graphic board did you buy that it allows you to use the iMac inbuilt speakers please?
Nice work mate, looks great and a pro job
Thanks man!
solid I have wanted to do this for a while now! might just have to
Its a great display!
What wires did you snip on the ribbon cable for the power button ?
Fabulous job the instructions are so clear even I think I might be able to do this to my 2009 iMac but I’m not sure if if that year will be able to be used to like you’re using your 2014 but shoot you did a great job 🎉!
Thank you! Yes they have kits for your 2009, and I think it will be even easier, as they did not use adhesive to hold on the screens for those years.
@@RunYoungShootsye those old iMacs use the magnets to hold the screen
My late 2014 27” retina 5k iMac will act as a second monitor with just a thunderbolt cable.
Very interesting and impressive project. I‘m wondering what you did with the speaker crossover divider you also bought? You didn‘t install it? For what reason?
Thank you! I think it may have been defective, the speakers would make a high pitched squeaking noise all the time, so I did not install it.
This is a great video. I am going to do the exact thing. Thanks
Thanks for watching!
only thing i noticed was that you kept calling it a macbook
Nicely done, great job!
Thanks!
Subscribed!
Pro level work! A+ Very nice job. Very clean.
Thanks!
Great job and video! What are you connecting the monitor to and with what interface? TB? USB?
Thank you! I am connecting the monitor to a late 2015 iMac. I am using mini displayport, as that is what is on the back of the iMac.
Great video! Motivated me to try myself but having an issue where the input display isn't centered. Did you have that issue or know how to fix? Not seeing anything in the display settings to correct. The image is centered on the side of the screen.
WOW ! INCREDIBLE !!!
boss can u add link where to buy (add description) ? pls tysm:) great vid!
Very Nice, thank you for this excellent video. In the beginning I see you have an old 27” Thunderbolt or Cinema Display. I also still have that, but the panel inside is getting old and dark. Do you think I can buy a used 2017 5K iMac and put the 5K panel into the housing of the Thunderbolt/Cinema display using the same parts and technique you use here? I would love to keep the fantastic Apple display housing! Any ideas/hints would be greatly appreciated 🙏
@@daggerman-dcgk Thanks for watching! I don’t think the screen would fit into the thunderbolt display unfortunately. It is much larger.
Thank you!!! Do you also have a guide on checking the wiring with the multimeter? I'd love to do this, too!!!
I just used the multimeter to check continuity on the wires, so I could determine the polarity!
@@RunYoungShoots cool, sounds simple enough. Now to hunt for a cheap iMac :D haha
@@paul.ignacio Good luck!
@@RunYoungShoots thank you!:)
Great Video and Solution Sir!
Thank you!
Hi. Great vid. Since the seller doesn't offer the remote anymore with the kit, I was wondering if its needed from the project. I want to do this to an old 2017 5k as well.
Thank you! I believe they have different packages, and they still sell it with the remote.
Nice work. Very neat. Shame that Aliexpress stopped service to where i live
Thank you! Where do you live?
Another great video. Awesome DIY 🔥
Thanks bro!
Very Impressive 👏🏾
Thanks!
Could you test an iPad Pro on this display and see if it works perfectly? Not just mirror the display, but also the desktop mode. Thanks much
How did you identify which cables from the controller are for the power button?
amazing work!
would have been nice to know how much did all the accessories cost? And what is the total cost of conversion versus a different external extended monitor?
I've always wanted to somehow liberate the display of the Microsoft Surface Studio. It's a beautiful display unfortunately tied to an obsolete computer...
Eeeeuuuuh, a 2014 27 inch iMac as monitor would work by just installing OS Sierra, then connect through thunderbold as display? Tell me if I am wrong of course..
...clean conversion though. I know this is quite some steps and getting it right needs a good amount of attention and care. Top!
Thanks! Yes I believe you can get target display mode working through certain MacOS versions. I just wanted to use the latest OS available to my Mac.
I bought a luna display.
There is no need to destroy the iMac. I mainly work in FCPx, I can render two projects at the same time. Of course, iMac is slower than Mac Studio. There are many uses for having a Mac Studio and a functioning iMac at the same time. Best of all, Luna Display costs only $79
You completely miss the point
1:12
"removing all the internals from your MACBOOK" lol
Can you provide an update? How is it working out? Are you pleased with the picture compared to your iMac? There is a reference to 8bit color, have you noticed a difference compared to the iMac? Is the board that you installed reliable? Overall, was it worth it? Thank you for your response. Great video!!
Thanks for watching!
Its working great! The picture quality is identical to my iMac. The color are a bit different, which could be tuned to match better, but it doesn't bother me, so I haven't taken the time to do it. The board has proved to be very reliable, I use the monitor everyday.
I think it was worth it, I am very happy with the outcome.
@@RunYoungShoots Thank you for your response. I just retired my Late 2015 iMac and, thanks to your video, plan on turning it into a 5k monitor for my new Mac Mini. Parts are ordered!!! Thanks again!
@@timjameson1385 Great to hear, enjoy!
Is it possible to use the iMac with the own screen but through the panel via cable? Can the iMac use with external display after the own screen been removed?
The main downside of those screens is the burn in issue when you use them for long periods of time
Yes, I have noticed it on my computer, my monitor seems to be fine
Very interesting! Doesn’t the panel require some cooling mechanism?
No, the manufacturer does have a higher end board with a fan (more complex board), but this version is fine without one. I have not had any overheating issues.
It might be too late but this is an inexpensive way to deal with the hinge not working properly and not having to put lead in your Imac: iBofans Repair Replacement Hinge Broken Solution
Can you post a link to the used controller? I can‘t find it on eBay.
What display board did you use? Speaker cross over hardaware. Would you please provide links to those? Thanks
Great vid. Are you plugging the two display port cables into your computer to get 5k? What graphics card was in the iMac?
Yes my iMac requires both display cables to be plugged in. It has a Radeon M390 2GB, which is a bit old.
@@RunYoungShoots Gotcha, thank you!
Great job man!
Thanks!
Great video! Can the board support multiple inputs (can you switch between 2 computers)?
Thanks, unfortunately this control board cannot support multiple inputs
How did YOU do that with the cover, I mean with the service hatch where the cables for the DisplayPort come out? How did you get the hole with the grommet in there? Or did you buy a new cover?
@@juliansinger4327 I drilled a hole in it mate
Can the resolution be actually set to 5K? From your video looks more it is 4K.
Great Job Bro
@@therapking7772 thanks man!
Giga Chad voice👍
Thanks man haha
Awesome Job!!!! Tx for the video! Liked & Subbed.
Thanks!
Did this with iPad 3rd gen Retina display, so I got 8 more.
Excellent gig! Did you manage to calibrate the colors to match your master display?
Thanks for watching! I honestly never bothered, it was close enough for me to
@@RunYoungShoots thanks for responding. I'm contemplating this project and was wondering if color profile would match my workflow. I'm a pro photographer and use Photoshop and Lightroom a lot. I love apple displays but prefer working on PCs. It's always a lot of hassle to make it work properly.
the hot glue just took me out gang lmao
Hey nice mod was thinking of doing the same since I can't find a good condition Thunderbolt Display and this is 5k anyway. Was wondering how did you do the power button like which wires from the switch board did you cut and solder to the oem power button. Also do you still have access to the other ports in the logic board or did you just not think those ports are needed. Also how is the display for other non Mac stuff, was thinking this would be good for a game console or a steam deck. Thanks!
Hey, thanks for watching! The two wires I soldered were the last two from the controller board. I don't have access to the other ports, for me there were not necessary. I have not tried it for non Mac stuff, but considering that its a Dell controller board, I think it will work well! I am not much. of a gamer, but keep in mind these displays are 60Hz, so not the highest refresh rate.
That is true, Thanks for the reply :)@@RunYoungShoots
Cool idea.
great job!! 👍🏻
Thanks!
how is the latency for editing video or gaming?
I wish someone would sell a space grey version of this to me. I would pay good money for one.
Impressed!
Very cool I also want to do this, already got a iMac late 2015. I now wait for the video board, I want to ask why 2 display ports, I gonna use the iMac as a primary display for my MacBook Pro 2021, do I need there also two display port cable to connect or just one?
Nice video and channel I subscribe you, thanks for video
Greetings from Vienna
Thanks for watching and subscribing! Because your Macbook is newer, I believe you will only need one display port cable.
@@RunYoungShoots thanks a lot
I'm interested in doing something like this but only if I can get the speakers to work? Your specific crossover kit was simply defective?
Yes I believe it was defective, as there was a constant squeaking/buzzing noise when no audio was being played.