Yong Heng water pump upgrade comparison

In this video, I show that upgrading the factory water pump to a higher performance water pump will significantly increase the runtime before thermal shutdown of the Yong Heng compressor.

[@JoeFriday-h9n]

Filtered tap water from a hose , repurpose the water coming out , tap water is always fairly cool

[@stephaneminchinton9196]

Hi… Can you tell me what adaptators you use between the pump and the tank please? Thank you!

[@YongHengmods]

These are the fittings:
www.aliexpress.us/item/3256804109485706.html?spm=a2g0o.order_list.order_list_main.249.2d641802MR4XoH&gatewayAdapt=glo2usa

[@stephaneminchinton9196]

@@YongHengmods Thank you very much!

[@jackmclane1826]

You could have a major impact, if you add an interstage cooler.
What are the RPMs in the US with 60Hz grid? I think is an induction motor tied to grid frequency.
As these machines are constantly on the edge of thermal self destruction, the reduction to 50Hz in Europe (or using a VFD) might help reduce the thermal load and thus the longevity quite a bit.

[@Mike-hb4pc]

Have you tried putting some ice in the water? Heck, you could freeze a one gallon jug of water and dump that in your 5 gallon bucket.

[@dizzarty]

You should try a water pump/chiller for C02 laser cutters. Looks like it would be a plug and play upgrade for you.

[@manu133084]

Hi, i own the same stuff, but your air smell good? Mine smell very Bad, something in the air can describe, i don't use it and search info about that

[@tonysouthern3049]

Can you show us the label on the upgraded pump?

[@SpencerGaming7580]

Mine doesn´t exceed 36 degrees Celsius, i let it run with direct water flow

[@ConnerHolifield]

I wonder what would happen if I got a water pump for it bigger than this one

[@YongHengmods]

I think you may see a slight improvement, if any. As with most things, diminishing returns will be an issue.

[@Pitoumotorsport]

gonfler une bouteille composite chinoise avec un compresseur chinois ben moi je dit qu'il faut avoir des couilles !