Hi Pete. I completely understand about your wet weather. Nice machine. It nice to see back in the woods. Have a good weekend Pete & Lauren. 🥰🙂😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌳
Hi Pete: Congratulations on the new machine. I switched from hand cutting to a harvester/ processor this year. A BIG change, that’s for sure. Be Safe out there.
Congratulations on the purchase! You will make the best from a bad situation Pete!! One day at a time! Prayers for you and Lauren keep pushing forward!
Great work Pete and I like that your getting back to work with something that will make cutting tree's down a lot easier, especially on you're body. Take care and I'll keep sending prayers your way.❤❤❤❤
Question: Now can you take full tree to the landing. Chip the tops and sell trailer load of chips to paper mill? I believe they do that here in upstate NY. Queensbury area.
Some times the better timing for you is not the better timing of the world. I broke my leg a few years back and it pushed me into some better equipment and more grapples. It was a push but it was good moves. Like wise my buddy just bought a spider lift for the tree work we do and it’s expensive but we have the work for it and an aging crew that has a hard time climbing every day anymore. Congratulations good to see things moving forward for you!
Just glad to see you out there doing your thing and making timber dollars ✊️👍and i know it sucks to have to switch from hand to machine cutting but its way faster and safer so from that point of view it had to be done. And there is always need for heavy equipment operator's out there in the world so your golden man.
Pete, you’ll get to hangover my old boss used to have one of the Ryan Tanglehead the first one and we used to demo it. It was like a prototype and he could cut enough trees to keep the grapple skater and a cable skater busy cutting and topping with a 200 excavator.
Good for you nuts never a good time just some times are better than others you will do good you work hard for everything you have and after everything you have been through it’s obvious you ain’t no quitter good luck with that beast
Glad to see you out there with a good looking machine and that dangle head. Will be joining the danglemaster the "Stump" man himself. I love to watch hand cutting, but you are lot safer in a machine. Nick, North West Farmer (Oregon)
I know what you mean buddy when you say it's scary times I've been cutting for 22 years climbing Dragon hauling you name it I'm 41 right now I've been working for the company I've been working for as the foreman for the last 17 years I was supposed to take over in the next year year and a half and I am terrified terrified because if prices don't go down people are going to pay their bills before they get tree work done if I take this company over I am terrified something's going to happen and it's going to go under this has been a dream of mine for a long long time but it's such scary times out there and makes me think should I do it I don't know God bless you brother stay safe God Is With Us Always and will always guide us
Have faith , everything will work it's self out . There is always tree work out there . Most is not willing to work that hard, it's a difficult dirty job only the hardest men want to do it .
@@jameswilson322 I know buddy like I said I've been cutting climbing for 22 years I started when I was 18 I'm 41 now and we have a hard time the last 7 years finding guys to even show up so this all makes me nervous about taking over the company thank you for your comment God bless brother stay safe
In business there is seldom a good time to make an investment but there are times to bite the bullet and take the chance. With your accident and recovery, you should be proud of the fact that you are able to get back in the woods and back to work...🙏🏻🙏🏻🙏🏻👍🏼
I know bugger all about anything you do, Pete. I do know you liked a certain bar and chain on your saw. Can this beast accept custom parts, too? Now, I'm a retired pen pusher, so forgive my ignorance. Should the blade be faster than that or are you keeping it a bit slower until you get used to it? I am really happy you got your hands on good gear. When it's cold, or too hot, you will be safe in the Kobelco.
I wouldn't worry too much about what people say. You have to take things slow with new equipment, hydraulics have their own personalities and you have to get used to it, let alone moving to something you haven't run.
Nice machine Pete You deserve it You're a hard worker God bless keep on keeping on Stay safe
Awesome job. Congratulations on your new machine. Glad to see you back in the woods again. Stay safe and enjoy.
Hi Pete. I completely understand about your wet weather. Nice machine. It nice to see back in the woods. Have a good weekend Pete & Lauren. 🥰🙂😉👍❤️💜🙏🏻🙏🏻🙏🏻🙏🏻🌳
Awesome machine! That has to be a big adjustment. Great job. It will come together. I'm glad to see you! Thanks for sharing!
Congrats Pete! And I'm so happy to see you in the woods doing what you love.
What a machine. I knew things like that existed but it's nice to see it in practice. Glad to see you back at it!
Fantastic Looks like the learning curve was quick. Best part is no ticks no snakes and you’re in the AC 👊
Hi Pete: Congratulations on the new machine. I switched from hand cutting to a harvester/ processor this year. A BIG change, that’s for sure. Be Safe out there.
Congratulations on the purchase! You will make the best from a bad situation Pete!! One day at a time! Prayers for you and Lauren keep pushing forward!
Great work Pete and I like that your getting back to work with something that will make cutting tree's down a lot easier, especially on you're body. Take care and I'll keep sending prayers your way.❤❤❤❤
Good luck with your new machine and glad your inside a cab and a little safer!!
That’s awesome brother. My buddy has a 2017 170. Great machine. Rock and roll!!!!!
Question: Now can you take full tree to the landing. Chip the tops and sell trailer load of chips to paper mill? I believe they do that here in upstate NY. Queensbury area.
No market for chips here
So good to see you back in the woods. The new machine looks amazing!!
Awesome machine nutsey , can't wait to see what you do with it . TALK ABOUT GRABING THE BULL BY THE HORNS .
Same bull that bucked him off. Nutsy made that bull a steer!
I thought we were getting a bigger boat,Captain???🤠
Maybe next year!! Congratulations, Pete! Real nice set up!👍👍
I got another one yes but a smaller boat lol
@nuts319 In a couple more weeks ...You will be able to cast a bait caster with this machine setup!!👍
Congratulations on your new machine, Pete. You deserve it. Best wishes.
Bill
Once you get the hang of it, you’re gonna love it! I’ve got a Ryan’s 28 on a deere 210g and it’s awesome.
Nuts I have never been around one nor ran one but I think you done a heck of a job
Nice! I've been thinking about one of these for a while now. I'll be tuning in to see updates.
Congratulations brother!
Nice machine buddy. I’m sure it will do you well. Thanks for the ride along.
Congrats on the new machine. Hope is make life a little easier for Sir and is a productive
That a tad bit safer bub !!!
Looking good brother glad your up snd moving congrats on your purchase
Congratulations Pete!! You’ll get the hang of that beast before long. Great to see you up and about. You’ve been working hard. Great job.
Nice looking machine Pete, won't get no poison ivy cutting timber with her lol. Cheers and take care
What you said!
Awesome Pete!
Looks to me like you have the swing of it just fine!
Nice ! Kobelco looks in nice shape
Some times the better timing for you is not the better timing of the world. I broke my leg a few years back and it pushed me into some better equipment and more grapples. It was a push but it was good moves. Like wise my buddy just bought a spider lift for the tree work we do and it’s expensive but we have the work for it and an aging crew that has a hard time climbing every day anymore. Congratulations good to see things moving forward for you!
that is one awesome machine. Congrats Pete!
You run it like you have run one for years, your a natural 👍👊🇺🇲🇺🇲🇺🇲
Nice Machine Pete those kobelcos run pretty good. Goodluck with her .
Congratulations you need that machine.
That thing is awesome! You can F some serious stuff up with that thing. Congrats
Congratulations on your new purchase
Definitely a learning curve there Pete , you will master it no doubt
Pete… that looks like fun!
Congrats!!!
Congratulations🎉Pete..May God Bless You and Your New Machine.
The more you run it the faster you'll get. Great job and looked like you were having fun with your new toy.
Nice machine Pete, will make your job easier and safer.
Congratulations on the new beast.. keep looking forward!!
Hey Pete! Very smart decision, I for one won't worry so much about your safety!
I'm sure Pete you will get up to speed in no time, glad you have bough it.
Great video buddy still sending prayers for you 🙏 glad you are back at it again 👍
Smart move and one you needed to do, good not waiting any longer. God Bless
Just glad to see you out there doing your thing and making timber dollars ✊️👍and i know it sucks to have to switch from hand to machine cutting but its way faster and safer so from that point of view it had to be done.
And there is always need for heavy equipment operator's out there in the world so your golden man.
Congratulations on the new machine looks like a great setup 👍🏻👍🏻👍🏻
Very nice piece of machinery thank you for the video
Pete, you’ll get to hangover my old boss used to have one of the Ryan Tanglehead the first one and we used to demo it. It was like a prototype and he could cut enough trees to keep the grapple skater and a cable skater busy cutting and topping with a 200 excavator.
Congratulations on your new machine Pete great to see you back again stay safe watching from Ireland
I can't believe anyone would go hard on you knowing what you've gone threw man.just keep on giving er hell.
hi there doing real good for a new machine , best to all john
stick with it you will get better GOD BLESS
Great idea Pete. Have to stay safe and make it easier for yourself
#1 Good to see you're steel protected and diesel powered.
#2 Don't worry, you'll still get to scratch that hand cutting itch periodically.
Good for you nuts never a good time just some times are better than others you will do good you work hard for everything you have and after everything you have been through it’s obvious you ain’t no quitter good luck with that beast
Congratulations! You will be more successful than ever now. Rise from the ashes!
Good to see u back at it, nice machine. Congrats
Nice work Pete!
Good job and video Brother. Good to see you back in the woods getting after it, but be safe
Congrats man very exciting news game changer right there .. I'll tell ya I miss logging so bad it drives me insane lay in there big man
You’ll come back to it
You’ll have this sorted in no time.
Dam kobelco nice machine should do you well next week and this weekend supposed to warm up nice and not much rain
Glad to see you out there with a good looking machine and that dangle head. Will be joining the danglemaster the "Stump" man himself. I love to watch hand cutting, but you are lot safer in a machine. Nick, North West Farmer (Oregon)
Thanks for the video!
I know what you mean buddy when you say it's scary times I've been cutting for 22 years climbing Dragon hauling you name it I'm 41 right now I've been working for the company I've been working for as the foreman for the last 17 years I was supposed to take over in the next year year and a half and I am terrified terrified because if prices don't go down people are going to pay their bills before they get tree work done if I take this company over I am terrified something's going to happen and it's going to go under this has been a dream of mine for a long long time but it's such scary times out there and makes me think should I do it I don't know God bless you brother stay safe God Is With Us Always and will always guide us
Have faith , everything will work it's self out . There is always tree work out there . Most is not willing to work that hard, it's a difficult dirty job only the hardest men want to do it .
@@jameswilson322 I know buddy like I said I've been cutting climbing for 22 years I started when I was 18 I'm 41 now and we have a hard time the last 7 years finding guys to even show up so this all makes me nervous about taking over the company thank you for your comment God bless brother stay safe
BTW it's good to see you back in the saddle again and doing what you love to do. 🎉😊😊😊
Hell yeah. Awesome buddy👍
You got it Pete 👍 💪 Say goodbye to poison ivy 😅
Looks like the vines are a PITA. Good to see you back to work. Seen you on Mark and Eddy's videos. You look good.
Take us with you! We want to go! Thanks in advance!
Let me know how you like the machine.. I’m thinking about doing the same setup
peat its nice to see you back here now please take it easy and believe in the power of the lord
Awesome job!!! Glad to see you back.
Bet that's heavy! Nice video
You will catch on in no time at all
Who's the new guy 😂 jk. Nice looking machine and the right way to go. Alot going on to figure out.
Congradulations you have earned this many times over
Good to see you back. Congrats on the new machine. You gonna be paul bunyan show this year?
congratulations that's a nice looking machine
Thanks odie
Can you make it sound like a 2 stroker !!! lol 😂 looking man stay safe!!!
In business there is seldom a good time to make an investment but there are times to bite the bullet and take the chance. With your accident and recovery, you should be proud of the fact that you are able to get back in the woods and back to work...🙏🏻🙏🏻🙏🏻👍🏼
Congrats buddy nice machine
Didn’t look so bad to me. That’s a big machine
Great to see you improving 👍👍👍
Congrats couldn't be for a better man
I know bugger all about anything you do, Pete. I do know you liked a certain bar and chain on your saw. Can this beast accept custom parts, too?
Now, I'm a retired pen pusher, so forgive my ignorance. Should the blade be faster than that or are you keeping it a bit slower until you get used to it?
I am really happy you got your hands on good gear. When it's cold, or too hot, you will be safe in the Kobelco.
That’s about all the faster I want it to cut for now
I wouldn't worry too much about what people say. You have to take things slow with new equipment, hydraulics have their own personalities and you have to get used to it, let alone moving to something you haven't run.
Looks like your catching on pretty quick. Nice not to be hand cutting those vine covered trees.
Nice set up. Should give you years of production.
CONGRATULATIONS!
There ya go!! 👍
Get to work and learn that thing 👌
I’m glad you’re still kicking Pete
Me too
Just keep pushing😀
I sure hope you DIDNT trade your rubber tire cutter in for that.
Pete is in some serious steep ground.
I still got it
Does the claw tell you what the diameter of the log is where you grasp it? I saw that on a machine once but fuzzy memory on which kind.
No
Oh boy!!!!! 😂 😂
Nice new toy , you getting rid of the wheeled cutter ? Or has it been gone for a while .
Still got it
That's a game changer.