Old Yezdi /Jawa 250 Points +timing setting || Detailed video

HELLO VIEWERS.
This video contains two detailed process :-
1 ) timing setting
2) point gap setting.
Both the process are completely different and explained here clearly which may be referred as a standard procedure for any of the contact breaker point ignition system motorcycles
CB POINT GAP : 0.25- 0.30MM @ TDC
Please keep showing your support
for any details you can message me on INSTAGRAM OR MAIL. / moto_travelxd
reffer to the channel play list for other videos of yamaha RX100/135, YEZDI.
THANKS
OTHER VIDEOS LINK :
YEZDI SERIES :
• YEZDI SERIES
CARBURETTOR SERIES YAMHA RX
• Carburettor series RX1...
CLUTCH SERIES YAMAHA RX
• Yamaha RX CLUTCH SERIES
YAMAHA MAINTENANCE SERIES :
• Yamaha Rx maintenance ...
2T OIL PUMP SERIES :
• 2T/Autolube pump Serie...
ALL RIDES :
• MOTORCYCLE RIDES

[@MotoTravelRide]

* This is a detailed video includes 3 process,keep patience.
* If you're doing it for 1st time and making mistake, don't worry,no one can be perfect in 1st attempt

[@RaviKumar-nu1kp]

Only engeneer knows the depth of knowledge which u share to Nation India in which we are...

[@SoreSmokingMariachi]

great video, greetings from Australia I have 1958 jawa 353

[@ahin2k]

most informative video for jawa yezdi point setting

[@MotoTravelRide]

So nice of you

[@fausto3118]

Nice video and good advices. I have a Jawa californian 250 and the ignition is very very similar. I just would point out, that points should not make that spark...that's the evidence of the capacitor not correctly working, points are going to ruin. Cheers from Italy

[@MotoTravelRide]

Thank you. True, even the point terminals are not sitting flat on each other (IMPROPERLY WORN OUT). Recently I got hold of the original points & capacitor will do a replacement of those soon,and share.
cheers mate. 🍻

[@maheshjadhav8123]

Good 👍👍

[@vaibhavpatil86]

Good to see your video after long time. People would love to see your videos more often. I like the technical depth of your content. Keep doing it sir.

[@MotoTravelRide]

Thanks sir.. I'm also very happy to see your comment. ❤️

[@speedmaniac003]

Great knowledge sharing. I really hope you get more and more subscribers. GOOD LUCK SIR !!
Between could you please do a video on RX, how to adjust points ?

[@MotoTravelRide]

Thank you for your kind words and wishes..
Would have definitely done on Rx ,but sadly there's no point(CB ignition) in Rx. It has Got Cdi system.

[@RaviKumar-nu1kp]

Thanks for knowledge we got❤

[@RaviKumar-nu1kp]

God give breakthrough

[@MotoTravelRide]

It's my pleasure

[@aviator9985]

SETTING THE IGNITION TIMING - FACTORY
1. Remove spark plug, insert gauge indicator thread M14x1.25
2. Find TDC( on the mangneto side crank shaft is a pin instead of keyway), with a marker pen draw a straight line and DOT on the CAM nut to indicate TDC.
Rotate the crank shaft clockwise( direction of rotation of the running engine )[RIGHT]
3. At TDC, set the contact breaker points gap(by means of adjusting screw) between 0.3 and 0.4mm using a feeler gauge.
4. Very important - by rotating the crankshaft counter clock wise( Opposite direction of running engine)[ LEFT ]
bring the piston down by 2.5 to 4 mm ( this can be recorded on the special gauge screwed on to the spark plug hole.)
5. Check again in this position the contact breaker point gap which should not exceed 0.05 mm, use feeler gauge or a piece of cigarette paper both of which should be sliding fit.
6. Should the gap be smaller or larger, slacken the two bolts securing the STATOR complete to the crank case and restore the correct gap, that is 0.05 mm by rotating the complete STATOR to the LEFT (making the gap larger) or to the RIGHT (making the gap smaller)
7. After setting Re-tighten the stator bolts.
Warning: The contact breaker base plate should "never" be slackened or rotated in order to set the contact breaker gap. It's position should never be altered under any circumstances.

[@randomclips6995]

Hi, good video, these days difficult to get mechanics with 2 stroke knowledge in tier 2 cites, better to learn ourselfs, tried to set points on my yezdi, everything is good, but during high accleration, firing is breaking, then need to reduce acce, can I get your number?

[@manditnaik4269]

My rx135 4-speed performance is very low when it goes above 110 speed it gets off then I have to start it after 30 seconds
Please help me

[@jagcha7242]

Bro, please help me, i have 2004 puksar drs model, when wver i wash or during rainy season water goes inside tank and engine doesn't start. I need to clean tank entirly and petrol also waste. Please share video how to resolve it

[@manditnaik4269]

I have (rx135 4-speed old model) and it has ( i-1 series block) in it (4TL10 132 cm³) which is 5-speed block so which carburetor should i use, because i have rx-100 carburetor fitted in it. In this case what should i do should i use 4-speed carburetor or 5-speed carburetor? Because my block is( i-1 series 4TL10 132cm³) which is 5-speed one

[@MotoTravelRide]

Use are 5s carburetor if you can get it. Or else second preference would be a 135 4s carburetor,it also works fine with the 5s block.

[@manditnaik4269]

Is there any difference in connecting rod of rx 135 4 speed & rx 135 5speed and also in crankshaft?

[@MotoTravelRide]

They are same

[@mig29baaz]

Can you make video on paco carbeurator cleaning and tuning?

[@MotoTravelRide]

Will try

[@shakirkhan8360]

Mere paas bhi hai

[@ramboshekhar9478]

Hello sir
Rx135 clutch dabaane ke baad bi chlti hai kya kru

[@MotoTravelRide]

Adjustment sahi kiya jae..fir nhi chalegi clutch dbane pe. .Playlist me hai adjustment video

[@Disha.Life.care.clinic]

My bike having a problem with clutch how can I contact you dear Sir