Thank you so much! I appreciate you taking the time to make this video with such complete instructions. You walked me through this, and I'm not a "handy" person. My old Dirt Devil is back in action with a new belt and bag!!
Thank you for making this video! It is very helpful. Your instructions include all the steps and you add important tips. I managed to do the belt change without a glitch, thanks to this video.
Thanks dude! Mine was jammed up with hair and wouldn’t turn even when I used a seam ripper to get the hair out... got it all clean and belt installed and now it’s like new! Ty for showing that middle plate removal too...the instructions on the side say take out the two screws but never mention that center plate. Took me a bit to fiddle with it to get the belt on the right side but it’s all good. Thanks a bunch!!👍🏻
Hey. Thanks to your excellent video, I discovered that a MASSIVE clump of hair had grown on the end of the motor shaft and TOTALLY hogged out the old belt. :) Thanks for the help, you saved me a lot of heartache.
thank you so much!!for just a few dollars for the belt and 15 minutes of time i saved a ton of $$ instead of buying a new vacuum!!!! i appreciate you very much.
Thanks for posting & saving (963 views•Feb 20, 2021) almost 1000 in 3 months of us from having to figure this out on our own. I would have the whole thing apart and dirt everywhere. lol
Hi Tasia. It depends on what you mean by “twisted”. If I’m understanding your question correctly, the answer is yes. The belt necessarily twists 90 degrees in the gap between the brush-bar and the motor’s shaft. This is because it wraps around both the brush-bar and the motor’s shaft, which are perpendicular to each other.
@@BrettSchmidt Thank you for your response. If I remember well, the instruction on the booklet says that there is a slight twist when replacing the belt.
I'm assuming you pulled out the red crevice tool from the nozzle. If yes, likely the hose is blocked. Dissconnect the hose where the nozzle connects to the machine, by twisting it in the direction of the arrows, then pull it off, and clean out the hose. Good luck Alberto.
![The Wall Song ร้องข้ามกำแพง | EP.215 | พาเวล นเรศ - พูห์ กฤติน | 17 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/IUzrjuf60P4/mqdefault.jpg)
Thank you so much! I appreciate you taking the time to make this video with such complete instructions. You walked me through this, and I'm not a "handy" person. My old Dirt Devil is back in action with a new belt and bag!!
Thank you for making this video! It is very helpful. Your instructions include all the steps and you add important tips. I managed to do the belt change without a glitch, thanks to this video.
Thank you. I had no idea the brand scutcheon came off the front to get at the shaft, and doing it this way makes it so much easier.
Thanks dude! Mine was jammed up with hair and wouldn’t turn even when I used a seam ripper to get the hair out... got it all clean and belt installed and now it’s like new! Ty for showing that middle plate removal too...the instructions on the side say take out the two screws but never mention that center plate. Took me a bit to fiddle with it to get the belt on the right side but it’s all good. Thanks a bunch!!👍🏻
Hey. Thanks to your excellent video, I discovered that a MASSIVE clump of hair had grown on the end of the motor shaft and TOTALLY hogged out the old belt. :)
Thanks for the help, you saved me a lot of heartache.
thank you so much!!for just a few dollars for the belt and 15 minutes of time i saved a ton of $$ instead of buying a new vacuum!!!! i appreciate you very much.
Thank you. I was fixing to pop that front cover off like a snap-on part. Saved me a repair
Thank-You for great instructions without breaking anything on vacuum.👍
Thanks so much for sharing this!! Made replacing the belt on mine soooo much easier.
Thank you! This helped me get my dirt devil running like a champ again!
Very detailed and very useful!
That was REALLY amazing man! You are definitely a natural at teaching!!!
Perfect instructions. Good video and narration. Thank you very much
Thanks for posting & saving (963 views•Feb 20, 2021) almost 1000 in 3 months of us from having to figure this out on our own. I would have the whole thing apart and dirt everywhere. lol
Thanks, Brett!
I had to clean shaft as rubber belt had been burnt on. The rubber smell was atrocious for a long after removing belt. 🤔Thanks again
Thank you! Thank you! Thank you!
Thank you!
Gracias amigo
Should the belt be twisted when you put it on the shaft?. Please explain. Thanks for your video. I trying to replace my belt.
Hi Tasia.
It depends on what you mean by “twisted”. If I’m understanding your question correctly, the answer is yes. The belt necessarily twists 90 degrees in the gap between the brush-bar and the motor’s shaft. This is because it wraps around both the brush-bar and the motor’s shaft, which are perpendicular to each other.
@@BrettSchmidt Thank you for your response. If I remember well, the instruction on the booklet says that there is a slight twist when replacing the belt.
Thank you. It is difficult for me to get to the motor to replace new belt.
thank you, but where do I get a spare belt, I received a used one that has no belt.
Hi Karen. There is a link in the video's description. The link takes you to the belt on Amazon.
@@BrettSchmidt thanks, I didn't see that. I just ordered. Now let's hope I can fix it, 😁
Just got the belt, All done - easy peazy. Thanks so much Brett.
Thanks. Not designed intuitively. Getting the front cover off takes an engineering degree.
No it don't.
Is the belt line up on the insertion or is it twisted
What would cause mine nozzle barely sucks when u set it for front it picks up anything what could cause this on mine.. got a new Bag
I'm assuming you pulled out the red crevice tool from the nozzle. If yes, likely the hose is blocked. Dissconnect the hose where the nozzle connects to the machine, by twisting it in the direction of the arrows, then pull it off, and clean out the hose.
Good luck Alberto.
If the belt is slipping off the shaft it's twisted wrong.