Definitely agree with the pin gap. It will take a lot of testing to figure out the best spot to get closer to a consistent 15yd gap across the spectrum.
I really like my Arxos, wish the indicator system was a little better built but it’s definitely ok. I can’t wait for the sight light to come out just because hunting in grounds i lose light earlier but those are it. Otherwise definitely a great sight overall.
I played with one at Scheels that they had in the store mounted on a bow. I fine the turn dial was smooth at start but when got closer to either end it got harder and started to be choppy when turning? Did you feel any of this after some use or at the beginning of use?
Thanks for stopping by! As I've used it, the dial has gotten smoother on mine - probably should have mentioned this. I like where the tension is set on it, but you can always tighten or loosen the dial (Dialed has a video on this).
I just got one and loosened as far is it could go. Way too much tension for me, I like the smoothness of like the HHA Tetra. I hunt in really cold climates super stiff engineered sight wheels aren't in the cards with gloves and/or cold fingers. I'm sending it back.
It's connected to the macro windage adjustment. Once you have that set, you can use the micro adjustment without having to touch the 2nd axis again. Hope this helps!
At first i thought one fastener affects two different axes, but i dont think thats the case. Maybe a closeup of what this implies and function would clarify. Im a bit confused as well.
Good, informative and balanced review- thank you. What quiver do you run? Any clearance issues with the Hamskea?
Thanks for stopping by my channel. On the Mathews I ran the LoPro quiver and on the PSE I run the TightSpot - no clearance issues on either setup.
Definitely agree with the pin gap. It will take a lot of testing to figure out the best spot to get closer to a consistent 15yd gap across the spectrum.
I may test a bit and end up putting a mark on the post.
I really like my Arxos, wish the indicator system was a little better built but it’s definitely ok. I can’t wait for the sight light to come out just because hunting in grounds i lose light earlier but those are it. Otherwise definitely a great sight overall.
A sight light would definitely step up its game nicely! Glad you’re enjoying yours!
The angle was designed so the scope is closer at long distances. It's definitely a cool looking sight.
I agree!
I played with one at Scheels that they had in the store mounted on a bow. I fine the turn dial was smooth at start but when got closer to either end it got harder and started to be choppy when turning? Did you feel any of this after some use or at the beginning of use?
Thanks for stopping by! As I've used it, the dial has gotten smoother on mine - probably should have mentioned this. I like where the tension is set on it, but you can always tighten or loosen the dial (Dialed has a video on this).
I just got one and loosened as far is it could go. Way too much tension for me, I like the smoothness of like the HHA Tetra. I hunt in really cold climates super stiff engineered sight wheels aren't in the cards with gloves and/or cold fingers. I'm sending it back.
@@tomhenrich2963 Gotta go with what works for you 🤙
@@s.g.holmes agree! I think they are on to something. May try again when gen2 of the product comes out.
thx..was gona get one til your point abt the 2nd axis being connected to windage...deal breaker
It's connected to the macro windage adjustment. Once you have that set, you can use the micro adjustment without having to touch the 2nd axis again. Hope this helps!
At first i thought one fastener affects two different axes, but i dont think thats the case.
Maybe a closeup of what this implies and function would clarify. Im a bit confused as well.
The have a three pin vertical now
Yep, I've used it and it's a great option!
So is the white line on dial JUST for a reference to where the sight tape should start? Is my 20 on the first pin?
Sorry I misspoke. Is the white line for the calibration tape start point?
@@Pstratis541 I used it that way. Dialed has a whole video on how to use the tapes for sighting in also. Thanks for stopping by.
hey man, great video. does it accept a lens?.
Thanks! That's a good question. I will reach out to dialed on that one!
So it looks like Dialed is working on a lens. Go check out their Instagram for updates
Does it have a third axis?
Good question. Yes, the 3rd axis adjustment is located by the sight housing.
I have the same problem with a red pin and on my black gold it’s my 30 pin and I almost try not to use it 😂
I feel ya man! Dialed did my 3V pins all green - so much better now!
The dial looks like it’s made of plastic. What is it made of?
It's made of 6061 aluminum
Companies come out with some bad ass sites, unfortunately they are not poor man friendly. Haha
I understand that! Thanks for watching!
Not for thT much man look how long axcel has been in it these guys come in and they charge 500 same ad axcel nope
I hear ya man!
How is it the same as axcel?