ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- 🛒2008-2018 Can-Am Spyder "Front" Facing Dual A-Arm Lighting Strips: www.slingmods....
🛒2019+ Can-Am Spyder "Front" Facing Dual A-Arm Lighting Strips: www.slingmods....
🛒2019+ Can-Am Spyder "Rear" Facing Dual A-Arm Lighting Strips: www.slingmods....
The Upper & Lower LED Accent Strips for your Can-Am Spyder are one of those mods that really sets your bike apart from the rest. This kit comes with 4 strips for both sides of the Spyder and is used as a daytime running light to increase visibility for oncoming drivers. Each strip is encased in flexible smoke tubing to protect against harmful UV rays. You'll get a bright white full-time running light and the strip will blink amber when you hit your turn signal for increased safety and coolness factor. This product is fully Plug and Play and integrates with an OE-style wiring harness.
🛒2008-2018 Can-Am Spyder "Front" Facing Dual A-Arm Lighting Strips: www.slingmods.com/can-am-spyder-dual-color-a-arm-running-lights-with-amber-turn-signal
🛒2019+ Can-Am Spyder "Front" Facing Dual A-Arm Lighting Strips: www.slingmods.com/canam-spyder-f3-rt-dual-a-arm-running-light-strips-turn-signals-2019-up
🛒2019+ Can-Am Spyder "Rear" Facing Dual A-Arm Lighting Strips: www.slingmods.com/canam-spyder-f3-rt-rear-facing-a-arm-led-running-lights-with-blinker-tricled
Is there a warranty on the LED lights? My bottom A Arm lights are not all illuminated. I had them for about 1 year. Or can replacement LEDs be purchased?
Hello Charles, the MFG warranty is 1 year.. but if the entire strip is out.. it's most likely your wiring connection point that has come loose. Please double check your wiring for that strip for either a loose connection or for any possible corrosion build up. Our customer service team is always available for assistance at the link I've provided with anything that may be needed. www.slingmods.com/index.php?route=information/contact Thanks for watching!
Can you add more LED lights to this system? I have a 2015 Spyder RT Limited Do you have a system that goes on tire rods and mirrors so both areas light up together?
Hello Mike, we have a few more LED products for the RT mirrors here: www.slingmods.com/index.php?route=product/searchcanam&vehicle=1&search=spyder%20led%20mirror They are run independently from this system, but can be run in conjunction with one another. Thx.
I recently installed this mod. Everything went good until I attached the yellow wire. When the bike is NOT running and the key is turned on everything is perfect. As soon as I start the bike (2018 F3T) All running lights go to yellow. They will not blink either. I have tried all the wires going to the turn signal. When testing with a 12v tested the wire is blinking. Possible resister needed? Right now just running with the white running lights. HELP
Hello Mike, if you could please send a ticket to our support team, we're happy to work with you and the MFG to diagnose the issue for you. You can submit that ticket here: www.slingmods.com/index.php?route=information/contact
When will F3-s 19 models have an option
Hello D, yes it will. They changed same things up in 2019 in regards to the turn signal wiring. We're coming up with the solution and will have the newer model remedy shortly. Thanks!
What's the name of the led lighting kit you're using in the video?
I have a CAN SPYDER
They can be found here: www.slingmods.com/index.php?route=product/search&search=dual%20a-arm%20strip
Is there a 2019 F3T option yet? I do not see it on your website.
The sample is on the way to us now.
do you guys have a hazard switch setup for ryker? the US models didn't come with a hazard switch, overseas did.
That's a great point John. I hadn't even noticed. We'll look into this asap.
is there a back view? that top arm looks like it would be visible from the back as well.
Hey John, we chose to run the light strip higher up on the upper A-arm.. if you run it across the middle of the front side of the A-arm the strip is not visible from the rear.
Will this setup work on a 2013 ST Limited?
Yes it will, but there's a chance you may experience HyperFlash. You can calibrate it on the 2014+, but not on the 2013 models.
NO LINK in desctiption?
Here are the links:
🛒2008-2018 Can-Am Spyder "Front" Facing Dual A-Arm Lighting Strips: www.slingmods.com/can-am-spyder-dual-color-a-arm-running-lights-with-amber-turn-signal
🛒2019+ Can-Am Spyder "Front" Facing Dual A-Arm Lighting Strips: www.slingmods.com/canam-spyder-f3-rt-dual-a-arm-running-light-strips-turn-signals-2019-up
🛒2019+ Can-Am Spyder "Rear" Facing Dual A-Arm Lighting Strips: www.slingmods.com/canam-spyder-f3-rt-rear-facing-a-arm-led-running-lights-with-blinker-tricled
Where is the video for the RSS?? How do I tap into the turn signal?
Hello Jerrod, I don't have an RSS to check for you. 😥 I can contact the MFG on your behalf if you'd like. Please let us know.
Slingmods.com yes please
What if your mirror doesn’t have a blinker?
Hello Martin, what Year/Model Spyder do you have?
2019 f3
@@martinduke8382 If you have a 2019 f3, then you would have to tap the turn signal wire from the fender. There is 3 wires coming out of the fender. Ground, positive for running lights and positive for the turn signal. You'd only need to tap the turn signal wire.. downside is on every 2019 F3 Spyder, it seems like the wire color is different, so you'd need to probe it with a multi meter to see which one comes on and off when then signal is turned on. If you don't run the turn signals the installation would not require you to grab the turn signal lead from the fender.
Will this work on the 2020 F3?
Hello Raynard, we just launched that item here: www.slingmods.com/canam-spyder-f3-rt-dual-a-arm-running-light-strips-turn-signals-2019-up
You guys gotta.make this for the ryker
I actually have it on my desk as I type this. We'll be doing the install video next week along with quite a few other lighting goodies for the Ryker! Stay tuned... as we have alot of cool stuff coming!
@@Slingmods yes I will be the first to order!!!