HOT WHEELS R&D PAINT PROJECTS. Adult Diecast Restorations
ฝัง
- เผยแพร่เมื่อ 22 ต.ค. 2019
- Lil R&D paint work with Dupli-Color and Alcohol ink/clear coat
This is intended for adult viewing. Anyone 13 years and under are not intended to view this video and are encouraged to leave the channel - แนวปฏิบัติและการใช้ชีวิต
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Came out AWSOME
Thanks for sharing!!
Now I have to try that metal cast paint out 🤔👍✌
Hello from miami,I have always use metal cast paint in die cast,works even better is u use metal cast base coat,they do come in green and yellow,works really well if you dry them with a hot hair dryer, great video.
Thanks for the info!
Subbed a while back, now I'm especially glad I did. It's the experimentation that is, for me, the most fun part of this hobby. Thanks for sharing as you learn.
I think experimentation is what makes this hobby more interesting to ourselves, and finding new ways to push our boundaries
@@ScaleStreetGarage Yup why have only been doing this for about 4 months and it Is awesome
Love the red color results. Pretty sharp.
Love the colors, I'm gonna have to get myself some duplicolor paint and try that on my customs. Thanks for the info.
The red came out perfect. Neat video.
Cool!
Great video some nice colours.
Enjoyed, the red paint really pops.
Cheers
That red is amazing! Good work!
Great information all three came out really nice 👍👍😊
Beautiful red.
I used the red one on the base of my Halloween build and it works realy good for a colored chrome look. Great video
Nice job on all of them! Any time you learn something you didn't know already is a successful experiment imo.
The chrome is not great. I usually spray these on right over cleaned and shined base. Usually 5 minutes between light coats with a small fan to add drying. I use revive floor polish for clear coat. I find that with metalcast I can not go back the next day and put on another coat as I get the previous coat starts to ripple and flake. Also putting can in warm water gives a better spray. I use Duplicolor on ever vehicle as it gives me authentic factory colors and different color primers can alter those colors.
Love the red and purple color looks awesome buddy thanks for sharing buddy keep up the great work bud 😎👍👍
I love the metalcast paints myself.... always my first choice, just wished they had a better selection of colors in it....your cars turned out beautiful
Great video 👍👍👍👍👍
Thanks for the info! I've been curious to try the duplicolor metallic.
How beautiful you left both cars, greetings friend
Very cool :)
Hello amigo show de vídeo amigo Parabéns lindas miniaturas hot wheels já deixei meu like tmj amigo Brasil
I use testors transparent colors in the rattle cans to get the spectraflame effect over the polished bodies and it costs about half of what the duplicolor does. I have used both of them and they both look great. Awesome video of course as usual. Keep it up.
Never used testors paint, I'll keep an eye out for it in the future. Thanks Lanny.
Hobby lobby has it about $5 a can. If you have an email address I can send you a picture of an El Camino I just finished in the testors green transparent.
All three look pretty damn good to me.
Great paint jobs! I fund the chrome paints are an illusion, once you clear over them or paint, it goes to a grey paint like a primer.The spectraflame base coat I think the sparklies come though the spectraflame and make it more candy like. Lots of tiny sparkles may be the key. LOL I have used the anodized yellow before and I find the can put out to much paint puts out to much, I de-can it into a plastic cup and add clear coat with hardener and air brush it on. It gives me more control on thickness and I get a more transparent look.
I'll try that method, thanks!
Cool, I know you know what your doing just spreading the love.
@@Jsellers1965 thank you, yeah the de-can method mix with clear on a black base under the chrome would be logical like the Createx except with urethane.
I've never used the Duplicolor Chrome paint, so I can't speak from experience with it. Other Chrome paints I've used in the past say that after the paint dries to buff it to the chrome finish. I wonder if that would have made a difference. Of course the last time I shot chrome paint was about 10 years ago.
Oh my...... look at the shine on them bad boys 🤘🤘🤘
Awesome as always mate but that red looks insane cand believe its from a rattle can
Funky
You should try wet sanding between coats! And I watch a fellow spray the the rattle can in a cup and then use his air brush. It turned out pretty nice. Just ideas by no mean a expert or even a beginner! Just stuff I have watched! If you decide to do more like this I will be here watching.
Thanks Kirby!!!
Did anyone else notice that the rattle can paint pulled away from the body lines and the alcohol ink laid in the body lines? Did this really happen or is it just my tired eyes. If it did happen what causes this?
I did notice on the blue car the hood lines from the Dupli-color were drawn away. The alcohol ink may have been from too many coats since I didn't use as much ink as I should have.
I'm really liking the red and purple . Oh by the way that gas monkey Corvette is awesome! Where can I get one like that brother ? Love the blue with flames .
I'll look to see where I have another, which I know I have. You can PM me on Instagram (onesixtyfour) we'll get ya hooked up.
Your in the Renegades and Hoodlums Facebook page right ? I'm Anthony Cormier
need to use gloss black as a base before using the chrome, medium to light heavy coats of the chrome, no clear, as that will dull the chrome look, more to an aluminum look....
So basically like the Createx process then. Ok thanks!
I wonder how the yellow ink would look over the blue and the other ink over the red. Might it do some deepening effect?
nice with 1/24 and larger scale used rattle can with rattle cans used cheap testors air brush and glass bottles never happy with clair out of a can not sure like i said got to try this please comment luv scooter yellow is cool please do one thanks again
Very good video ! I've seen the dupli-color anodized paint in the stores and a couple guys have used it in there videos. What's the drying time on that stuff .... if you don't mind me asking ?
About an hour its dry to the touch, 3 you can handle it.
@@OneSixtyFourRevival thank you, I'm going to try it out !
Anyone having an issue with the Metalcast chipping off the bodies?
Where did you get that red paint? it looks very nice
Its Dupli-Color. From most any auto parts store
The purple duplicolor tends to be blotchy though for some reason.
Would you be interested to take a project painting a vintage model car to my specification?
Sorry I don't really do commissions as I barely have time here lately to do the projects I have for the channel but I thank you for thinking of me for that
I used that Dupli-Color™ paint and it destroyed my whole project :(
Sorry to hear that. I've had decent luck with it so far
Hello
i can't stand cheap paint
yeah, not a fan of rattle can but depends on what you do with it and at times you can pull it off. not often though.