HOW TO REMOVE YOUR BEARINGS- Inline Skating tutorial #3
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Hey guys It'sa me, Tiago the french inline skater, and I'm back with another tutorial! you it will be usefull! More tutorials to come!
Link to this great tool:
www.hawaiisurf...
Check out my Instagram and Facebook! :
/ tiago_le_meur
/ tiagoinlineskater
Proceed with caution if you've got spacers. They are used to fill the gap between 8mm bearings and 6mm diameter axels. You can pop the opposite side bearing out by pushing on the spacer. I foolishly tried method #1 here to pry bearing out with allen key and ruined the spacer. If you see a solid metal tube spanning the full depth of the hub there is a spacer in there.
I found out the hard way, too. It seems the the older model blades used the spacers and the new ones don't, but I've only used Rollerblade brand for the past 25 years.
finally!!! a video showing me exactly what i wanted.
How can i remove the bearing when it has the long cylinder going all the way to the other end
Thank you! All the other videos either had specific tools or told me to just forcibly push it, but your method works the best!
this doesn't deal with the problem of removing the spacer first? it seems to assume there is no spacer? Have I misunderstood? any help appreciated
I've been looking for this for the past few days. It's my first time and the other videos were not helpful at all; no details were mentioned and the camera wasn't close enough to see. Thank you!
Thank you.
It was really helpful, just what I needed
Hey THANK you for this, I was so mad when my Seba Luminous wheels showed up this week with no bearings, but I hadn't realised I could remove the existing ones in my twister edge wheels! Trying out a rockered setup after watching some of your other videos, already feels great :D
I just realised that i had been pushing the bearing from inside out - thus damaging the belt of the bearing ...
I.e. i pushed with the tool from inside ... kids never do that at home. Glad i did that realization on my first skates that i am replacing at the moment :)
Otherwise i would be crying...
I love your work man , I am staring skating you gave me so much importan and relevant information that will save me so much time
Thanks man I’m going to use this on my wheelchair bearings
Awesome. Thanks for the help man
Method 1, NO - damaging to bearing, wheelcrack chance and scratched spacer!
Method 2; yess BUT rather wiggle the bearing out carefully instead of this just one-wiggle way...
Super great tutorial! I like your longer videos as well but I know that especially people who are new to your channel (you're hitting 1,500 subs very soon! :DD) appreciate short tutorial videos like this. So big thumbs up! I needed to see this myself also, I've done this a few times but I'm always worried I'll use to much force and damage the bearings lol.. :)
Jonatan OTW yes!
and i think this can be useful for people that really need to have a quick information :)
yeah, it used to be a nightmare to me when i started inline skating @.@ it was hurting my hands and all!
Jonatan OTW yes!
and i think this can be useful for people that really need to have a quick information :)
yeah, it used to be a nightmare to me when i started inline skating @.@ it was hurting my hands and all!
good timing. I was actually gonna do some maintenance
Jokerr Fox hehe ;)
Thanks! Unfortunately I already ruined a new bearing and made myself bleed 3x, but no more!
i believe you because of your accent. it just screams legit.
great videos o/ hope to see more videos from you :) i just started on inline skating and your videos have been helping me on some stuff, keep it up :D
MalvaZ I'm really glad I could help you :D
👍🏼👍🏼👍🏼
THE LINO LIFE oh hey
Pay attention! There was a plastic piece between the bearings (and broke it while trying to remove them). But this video helped me :))
Good tool to remove bearings easily.
Hi dude, can you make a tutorial for barrel rolls/triangle and grapevine?
Any idea on how to solve the overtightened bolts problem when the skates are new?
Anonymous get bigger size
Thank you for this
I think you can do it with a long bolt. gonna try that today cause I need the wheels for my diy rc car.
I changed my wheels but the screw is spoiled and become round. Do you know where can i get some spare screw? Im using seba er latest model
Good tutorial !
Thank you so much!
I enjoy these tutorials. I just can't find the wheel hardness that you use. help me please!
Derek Simmons not really sure... my wheels have too much grip and I want to do 180 degree turns?
alright, thanks.
this helped a lot!
Phillip Chen yes :)
but if you're still wondering what hardness i use for my wheels, I usually use 84A and 85A :)
I'm thinking on getting harder wheels, like 88A :)
Tiago Inline Skater thanks, I wanted to know the hardness, too. that helped too!
Derek Simmons The Atom One? these wheels are more for speed skating; they have a differét profile compared to freeride wheels :o but i'd like to test them!
I usually use Gyro F2R & Seba wheels :)
Gyro wheels are probably my favorite so far :D
It helped alot
Hey Tiago, tudo bem? You know an indoor place to skate in Paris? like not in the street or squares. thanks!!!
is the bearing same size as Skateboard bearing?
Thx
.can I use this Bearings for scateshoes
This doesn’t help if you have spacers just ruined one of mine Ty so much
I have spacers in all my wheels.
Pretty much all skates come with spacers in their wheels.
this is a very poor technique. The force you are applying to the bearing by "prying" it out can warp the bearing. Use a proper size tool to push the bearing spacer out taking the bearing with it, then push the opposite bearing through with your thumb, much faster and easier than this prying technique which can damage the bearing
Why did you watch the video if you know how to do it
How to clear professional baring
are you filipino or half filipino or quarter filipino?😁
It was FAST!
Reeeeeee they stoped supplying the tool!
This doesn't work if you have old wheels with bearings made in hell.
clray123 the old type of bearings with a Bronze-stuff in the middle?
yeah how in the world do you remove that
Tiago Inline Skater I have this kind of bearings, I can't remove and can't find any tutorial. Do you know how to to it?
you are very nice sketer
yeah.. and mess up your bearings by the third time mate...
I suppose you're talking about the 1st method?
Maybe you forced way too much, probably put the tool too deep, or something.
Personally never damaged a bearing this way, neither the people I know
@@TiagoInlineSkater No. Not me mate been doing this since 92... but showing this to an average Johny will defo cause issues if not damage.
@@copperrolls what type of spacers do you have between your bearings.