Thank you Junior! And I think you’ll have to run a spacer with the +35 offset because I read that a 17x9 +22 RPF1 clears by only a couple millimeters with TL-S Brembos.
They feel great! They’re very responsive and stop on a dime. The only thing I would change on them is the pads because they squeak when coming to a full stop. Pretty common with all BBKs. I’ll probably end upgrading the pads soon.
@@SebastianInt thanks.. i ended up sanding down the caliper on the inside.. it seems the powdercoat is quite thick probably 1-2mm causing the pads to be tight. Now its perfect after sanding it down.
No problem! I’m more than happy to help out and answer questions. They are from a 2004-2008 TL Type-S. The only way that you can run them without a spacer is if you get them machined like I did. You can get in contact with @dc5creations on Instagram or check out his website to get the service done.
Yes, they should fit. Just keep in mind that the base model master cylinder and brake booster is different from the Type-S, so you might want to swap them out before you do the BBK upgrade. Pedal may be a little too soft and too much travel with the base model brake components.
I added AP Racing Radi-Cal-II BBK to my Q50. I also put in the DS1.11 race pads. I already had the Acabono BBK but was smaller. On the track the AP Racing brakes are a lot better..but on the street totally unnecessary. They look cool 😎. Dot 4 and SS lines naturally. The AP Racing brakes really stop you..again and again, and again.....😉 Just wait till you need new rotors😳$$$
Sheesh, good thing you got them for $25, if you go on DC5/RSX clubhouse on FB everyone clowns on DC5 Creations for being cheaply built. Pretty sweet deal though not gonna lie
Do you know how much was milled down on that caliper.
Did you ever find out how much it was lowered
How’s the brake pedal feel?
What’s the camber numbers u are using?
-2 front, -3 rear
What song was that during that short cinematic and ending?
I don’t like put Spacers on that no good when you racing
I have the dc5 type r brembos my question is well the rpf1 17x8 5x114.3 +35mm clear the caliper please respond … love the vid btw ❤️
Thank you Junior! And I think you’ll have to run a spacer with the +35 offset because I read that a 17x9 +22 RPF1 clears by only a couple millimeters with TL-S Brembos.
whats the connect with the caliper milling? You have a link with prices for the services? and Where are they located?
All of the info is on dc5creations.com. He is located in Florida.
Did you have to put a spacer?
No spacer used at all.
I just retro fitted to brembos up front as well, haven’t driven the car yet. How does the braking feel?
They feel great! They’re very responsive and stop on a dime. The only thing I would change on them is the pads because they squeak when coming to a full stop. Pretty common with all BBKs. I’ll probably end upgrading the pads soon.
Do you run a spacer with wheel setup?
No spacers with these wheels.
What rotors? TL?
Yep, I have TL-S rotors on it.
How tight were the look pads.. I got the same kit... Pads fit super tight in one side
I had to sand down the edges of the pads a bit so they could move freely. It only happened to the passenger side for me.
@@SebastianInt thanks.. i ended up sanding down the caliper on the inside.. it seems the powdercoat is quite thick probably 1-2mm causing the pads to be tight. Now its perfect after sanding it down.
So you’re using the tl rotors is that right
Robbyns Milian Yes 👍🏼. TL rotors were installed.
What years bro
Sebastian Int so if use the tl rotors no need spacer
Sebastian Int sorry to ask so many cuestiones
No problem! I’m more than happy to help out and answer questions. They are from a 2004-2008 TL Type-S. The only way that you can run them without a spacer is if you get them machined like I did. You can get in contact with @dc5creations on Instagram or check out his website to get the service done.
Where did you order brake line ?
I bought the lines from eBay.
Where did you order you’re Corsa wheels?
I bought them directly through Kansei.
Sebastian Int 17x9 +22
These are 18x9.5 +22
Where did u get ur seats???
jesus cuadra I bought them from a JDM importing shop in New York.
What happened to you were are you
That big brake look so clean
Raymond Espinoza thanks bro! 👊🏻
does anyone know if these TL type s brembo fit on a 2003 rsx base or it only fit on type s model?
Yes, they should fit. Just keep in mind that the base model master cylinder and brake booster is different from the Type-S, so you might want to swap them out before you do the BBK upgrade. Pedal may be a little too soft and too much travel with the base model brake components.
@@SebastianInt ok thank you very much
Jack Evo You’re welcome! 👍🏼
I added AP Racing Radi-Cal-II BBK to my Q50. I also put in the DS1.11 race pads. I already had the Acabono BBK but was smaller. On the track the AP Racing brakes are a lot better..but on the street totally unnecessary. They look cool 😎. Dot 4 and SS lines naturally. The AP Racing brakes really stop you..again and again, and again.....😉 Just wait till you need new rotors😳$$$
So glad I was able to get this BBK. It’s a night and day difference. A little overkill for a stock car, but they always look cool like you said. 😂
Sweet Ride. I want to work hard to get my Rsx Automatic look as good as yours
Thanks for the kind words Orion! Appreciate it man.
Cool video Sebastian! You're a PRO TH-camr! 👍
Michael Koenig thank you Michael!
Great video man keep it up great to see a local 💪🏼💪🏼
CriticalAmbush ayeee thank you so much!
Nice vid, just subbed, gonna check out the rest of ya vids, live the stars in the roof
Thank you for the support Kevin! Appreciate it man. 🤘🏼
damnnn for $25 sheeshh
NILO MEDIA yessirrr! 😎 paid with straight cash lol
In love with your car! Hopefully mine will be as clean as yours one day!
Dc5 Angel thank you so much! 🤟🏼 I appreciate it.
Clean as fock!!!!!!
Thanks Russell!
i'll give you my left arm for them
Lemme get both arms and you can have it. 😂
Need thicker tires.
🔥🔥
Mike 2016 thanks brother! 🤘🏼
🔥🔥🔥🔥🔥🔥
Pedro Jarrett thank you boss mon! 🤘🏼
Sheesh, good thing you got them for $25, if you go on DC5/RSX clubhouse on FB everyone clowns on DC5 Creations for being cheaply built. Pretty sweet deal though not gonna lie
I show you mine but....my not as great as yours
Nahhh she’s basic man lol. Thanks homie! 🤘🏼
Hi I’m Jaysen green
🔥🔥🔥🔥
Kenny Valdez thanks Kenny!! 👊🏻