If you're getting your first gun in general I definitely wouldn't start with a pistol because it's a bit impractical, but if you mean first pistol then yes this gun is great. It's good for indoors or outdoors, its got enough range and since its green gas you don't have to worry about breaking any field limits on fps.
@@valorairosft I'm still a kid so I dont want to go for things like an lmg or a sniper, I want to get a gun that I can use well and still be able to run around and just do fast plays in general Since im still a kid I don't think my parents would let me get a aeg or any high cost gun
@@toyotacamry1733 In terms of cost I would go for a lancer tactical gen 2. It's a pretty solid beginner gun and at the same price point as this hi capa so you wouldn't have to worry about that. But if you could only get a pistol than this would suffice.
Please help. Every time I shoot my gun on full auto the fire selector switch will push itself back to semi and also when ever I shoot sometimes my outer barrel will literally just fall right out and also my mag release, whenever I press it it just gets stuck I looked down the handle where you can see the internals of the mag release and it seems that every time I press it they get separated and don’t stay together like they should do you think I just apply some super glue so they stay or what
Unfortunately I don't own the full auto version so the only advice I could give their is to disassemble that portion of the gun and re oil it. If the outer barrel is falling out that sounds like either the gun was assembled with a missing part or a major piece in the gun is broken. The recoil spring should have tension when in the gun. I would make sure you have your spring guide rod and the rod guide. If your mag release is getting stuck cleaning and oiling should fix that.
@@valorairosft I wasn’t aware their was different versions of the Black Ace, thought they only had Full Auto since it was all I seen in the store, anyway mine works perfectly, I can switch to full auto or to semi no problems
Im looking into buying this gun and was wondering if i could get a tracer unit but i couldn't find any compatible barrles as well as does the we ng3 nozzle work with this gun
Since this gun is sorta a we tech upgrade, upgrades for the we hi capas should be interchangeable (and I'm sure there's lots of those). As to the nozzle, assuming you're talking about the normal we tech hi capa replacement nozzle then yes, that's the one i ended up using as a replacement. Hope this helps
If you mean after market parts then yes! This pistol is compatible with almost all We Tech after market parts (barrels, slides etc.) I believe Aw Custom makes their own as well. Hope this helps!
After having this thing for a year the mag real ease has officially broken and the outer barrel fell out while I was shooting and my full auto switch is broken as well do you have any suggestions on what I should do to fix it or what parts I could buy to replace it with
Well if your mag release is broken you should probably just buy a new one (stock part should do). I don't really know how the outer barrel could fall out (did you put the pin in?), that just seems like it wasn't reassembled properly, and this model doesn't have a full auto switch so I don't really know what you mean by that.
It's glued in so I just went at it with some pliers, if it gives you trouble try heating up the end in some hot water for a few minutes to soften the glue.
AW Custom can fit most things made for WE I believe. I personally haven't looked into upgrades of that sort (other than replacing the og nozzle with the WE one), but I'd assume since a lot of WE is also compatible with TM that you'd have a lot of options. Hope this helps!
The easiest way for me is to dip the end in some hot water for a bit to loosen the glue and unscrew it. Since it's threaded you can't pull it off. Hope that helps!
Sadly no :/ the only mod you could do to get a different tracer on is adding some threads with some glue and parts from evike but it would be a bit janky
Plz plz I beg you make a video I’m having trouble putting the gun back together now and I don’t know what to do the hop up system is in the way of me being able to put in the spring pole thingy
It goes on pretty easy, prime the hammer first then slide it back on. When the groove in the slide aligns with the raised piece in the pin, you can slide the pin back in (the slide should not be all the way back or all the way forward).
you ever have the magazine randomly spray all the gas out? ejected the mag and it sprayed all the gas and shot my primary lol... this gun for me personally is mad unreliable
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
if i did'nt watched your video now, i would have not able to clean the internal of my pistol....thank you sir it was very informative indeed😊
Of course! So glad I could help!
thx man just bought this gun and good thing i followed your advice. Gun shoots great and looks great.
Awesome glad you like it!!
Plz post a video on how to re assemble the gun I’m having a lot of trouble man plz and I don’t want to buy a new gun
th-cam.com/video/4Ukkq72eB88/w-d-xo.html
How good would this be for a starter? I'm trying to get my first gun. Also is it good outdoors or indoors?
If you're getting your first gun in general I definitely wouldn't start with a pistol because it's a bit impractical, but if you mean first pistol then yes this gun is great. It's good for indoors or outdoors, its got enough range and since its green gas you don't have to worry about breaking any field limits on fps.
@@valorairosft I'm still a kid so I dont want to go for things like an lmg or a sniper, I want to get a gun that I can use well and still be able to run around and just do fast plays in general
Since im still a kid I don't think my parents would let me get a aeg or any high cost gun
@@toyotacamry1733 In terms of cost I would go for a lancer tactical gen 2. It's a pretty solid beginner gun and at the same price point as this hi capa so you wouldn't have to worry about that. But if you could only get a pistol than this would suffice.
Nice video keep up the good work
Thanks I appreciate it!
Good Job! Late reply but I just got back into Airsoft. Informative without being pissy.
Thanks!
Please help. Every time I shoot my gun on full auto the fire selector switch will push itself back to semi and also when ever I shoot sometimes my outer barrel will literally just fall right out and also my mag release, whenever I press it it just gets stuck I looked down the handle where you can see the internals of the mag release and it seems that every time I press it they get separated and don’t stay together like they should do you think I just apply some super glue so they stay or what
Unfortunately I don't own the full auto version so the only advice I could give their is to disassemble that portion of the gun and re oil it. If the outer barrel is falling out that sounds like either the gun was assembled with a missing part or a major piece in the gun is broken. The recoil spring should have tension when in the gun. I would make sure you have your spring guide rod and the rod guide. If your mag release is getting stuck cleaning and oiling should fix that.
@@valorairosft I wasn’t aware their was different versions of the Black Ace, thought they only had Full Auto since it was all I seen in the store, anyway mine works perfectly, I can switch to full auto or to semi no problems
Is it threaded and is so is it a basic 11m thread
Unfortunately it isn't threaded, you would have to buy a new barrel.
The full auto one is threaded
Im looking into buying this gun and was wondering if i could get a tracer unit but i couldn't find any compatible barrles as well as does the we ng3 nozzle work with this gun
Since this gun is sorta a we tech upgrade, upgrades for the we hi capas should be interchangeable (and I'm sure there's lots of those). As to the nozzle, assuming you're talking about the normal we tech hi capa replacement nozzle then yes, that's the one i ended up using as a replacement. Hope this helps
@@valorairosft thanks it did help. I'm buying this as soon as i can afford it so like 1 to 2 weeks
@@valorairosft I'm going to buy the auto one and HPA tap it hopefully
@@calvinhanan7241 Good luck with that mate! I'm jealous of the idea of an HPA tapped pistol
@@valorairosft thanks its only like my 3rd gun to so I'm hoping it will go well
Thinking about picking up just wondering can you still do modifications to this pistol?
If you mean after market parts then yes! This pistol is compatible with almost all We Tech after market parts (barrels, slides etc.) I believe Aw Custom makes their own as well. Hope this helps!
IS the nozzle stock or no and if not witch one do u have?
I had to replace the aw custom nozzle with a stock we tech nozzle. There are of course other options, but I just went with the cheapest one.
After having this thing for a year the mag real ease has officially broken and the outer barrel fell out while I was shooting and my full auto switch is broken as well do you have any suggestions on what I should do to fix it or what parts I could buy to replace it with
Well if your mag release is broken you should probably just buy a new one (stock part should do). I don't really know how the outer barrel could fall out (did you put the pin in?), that just seems like it wasn't reassembled properly, and this model doesn't have a full auto switch so I don't really know what you mean by that.
Valor Airsoft it does just pull the other saftey switch and it will be full auto
@@jordan_lit26 Ah so you have the full auto version, mine is semi auto only. I got the gun before they offered a full auto version.
Love the vid
Does the slide lock back when the mags runs empty?
Yep!
thanks.
How'd you end up getting the orange tip off?
It's glued in so I just went at it with some pliers, if it gives you trouble try heating up the end in some hot water for a few minutes to soften the glue.
What brand of aftermarket loading nozzle and BBH that can fit in our unit?
AW Custom can fit most things made for WE I believe. I personally haven't looked into upgrades of that sort (other than replacing the og nozzle with the WE one), but I'd assume since a lot of WE is also compatible with TM that you'd have a lot of options. Hope this helps!
Beatiful
Haha thanks mate
can you demonstrate how to disassemble the middle frame and grip (sear and disconnector etc)
I'll see if I can make a video for that over break :) Thanks for the suggestion!
How do I take the orange tip off?
The easiest way for me is to dip the end in some hot water for a bit to loosen the glue and unscrew it. Since it's threaded you can't pull it off. Hope that helps!
@@valorairosft thanks
Is it threaded or not? A comment a year ago said it wasn't threaded, and 3 months ago it says it is
Can you please do the lower frame and hammer please
Yes I definitely can once I get the time
Can i fit the Acetech ligher tracer unit in this pistol?
Sadly no :/ the only mod you could do to get a different tracer on is adding some threads with some glue and parts from evike but it would be a bit janky
You can buy a different barrel with threads
Plz plz I beg you make a video I’m having trouble putting the gun back together now and I don’t know what to do the hop up system is in the way of me being able to put in the spring pole thingy
For sure I can try to upload one in the next few days
Valor Airsoft omg thank you so much man your literally a life saver
Valor Airsoft I thought I was gonna have to buy a new gun
@@jordan_lit26 I'm so glad I could help you!
Valor Airsoft you don’t understand how released I am
I’ve had this gun for about 8 months now and it’s just has broke on me
What mag does it come with green gas or co2
Green gas :)
You can also run co2 with it
Well... Now the slides off... How does it go back on 😂😂🤦♂️
It goes on pretty easy, prime the hammer first then slide it back on. When the groove in the slide aligns with the raised piece in the pin, you can slide the pin back in (the slide should not be all the way back or all the way forward).
I actually just posted a video explaining how to do this (if anyone else sees this comment)
is the barrel threaded?
Unfortunately the barrel is not threaded, of course it comes with an orange tip but that's just held on with some glue.
You can buy a threaded outer barrel and thread adapter if you want to run a suppressor.
you ever have the magazine randomly spray all the gas out? ejected the mag and it sprayed all the gas and shot my primary lol... this gun for me personally is mad unreliable
The magazines for these guns are a little weak, you just need to buy better mags and the issue will be fixed.