How to Replace Front Bumper Cover 2003-2007 Honda Accord

Shop for New Auto Parts at 1AAuto.com trq.video/c-59-cQ
This video shows you how to install a new TRQ bumper cover on your 2003-2007 Honda Accord. TRQ bumper covers are exact replacements for your vehicle's factory bumper cover. If your bumper cover was damaged or lost, this video will help you save money by installing a new one yourself!
This repair was done on a 2006 Honda Accord EX 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Phillips Head Screwdriver trq.video/obtB...
• 10mm Socket trq.video/obnX...
• Trim Tool Set trq.video/oajj...
• Gloves trq.video/oatK...
• Safety Glasses
Subscribe: / @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: • Honda Accord 2003-2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@turbogt2911]

Note: if you live in the Midwest, or anywhere with a salty winter season, the four 10mm fasteners on the underside of the bumper cover (90146-SA7-000) and their corresponding clip nuts (90305-SM4-003) will give you problems. The 10mm bolt head will either break off, or the threads will seize to the nut and just spin when trying to remove. Ask me how I know this. I will end up drilling out all four of them on my 2004 EX-L V6. All of this to replace two stinkin' headlight assemblies.

[@Single-courier]

Can the front bumper from a 2005 Accord be swapped onto a 2007 Accord?

[@steve691]

Think I'm gonna poke my eyes out instead! 😮😂😅 Hope my grandsons can do this (fix the bumper not poke my eyes out) Thank you!

[@luisalvarado-yn7rb]

So flat head and ten millimeter socket

[@dennisshotsman3385]

Perfect! Nice job on video and directions, right to point getter done! Thank you!

[@mikewinkler4799]

Hello. Great video, thank you for sharing! I realized that I am missing several of the push clips. Would you happen to know the size of push clip that I should get? Thank you so much!

[@Coa_Kralj_Coa_The_King]

I’m tired of all this videos with Honda for US market🙄We need for Honda Accord 7th gen but EU model. But thank you anyway! Probably is the same or at least similar

[@shahidmir106]

Excellent man. Thank you so much. So clear instructions, I really appreciate it.

[@gilbertomora4817]

Excellent. Good job!!

[@countdown2xstacy]

Perfect !
👍🏻 👍🏻👍🏻

[@Coa_Kralj_Coa_The_King]

What are size of push clips for honda accord bumper please?

[@ClarkeWellborn]

Very well-done video! Thanks.

[@maungnaing1205]

you should teller what do we need

[@JayAmbeyDharmarthSevaSamiti]

India

[@pobreloko5279]

💪

[@awjr32]

Very well done video, greatly appreciated.