Thank you so much for showing the removal of the underside of the bumper! I had to ditch into a snowbank to avoid hitting an out of control BMW 3 series during a snowstorm. Hitting the snowbank didn't cause much damage, but it sheared off half of those little clips on the underside of the bumper and I've been looking for hours trying to find information on what the hell I need to replace. FYI, this is the clip y'all: Clip, Bumper - Honda (91505-TM8-003)
Hi ! the clips are call push pins not sure the actual size, but go to the dealer and show they should have it. Fairly inexpensive and they just need your VIN number. Than you Rolando
Thank you guys this video helped me alot with my 2018 honda accord bumper and splash shield all the clips broke and this video helped me alot I appreciate you 🙏
You don't have to take the whole splash guard off. Nor the tabs in the inner wheel well. I've taken my front bumper off several times. To install my PRL inner cooler.
Is it necessary to remove the splash guard? I see that being additional work to remove that. You mentioned it’s hard to put it back towards the end. I just need to remove to readjust the bumper because the Honda dealership claimed to not cause an issue where the two corners by the front H were not caused by them. I had Honda replace ac condenser covered by warranty since I didn’t get any cool air. Honda dealers are not good. They want to do a diagnostic fee to check the bumper and won’t be free on top of labor. This video and your instructions are very clear and transparent. I want to do this sometime to fix the alignment issue to the headlights on the front bumper.
Hello and no. If you have a scratch on your bumper, depending on how deep it is, you can maybe buff it out. You can also repair the scratch and repaint the bumper. Thank you for watching!
Hello! The fenders and hood only go up to 2017. So it doesn't seem likely without modifications. We would double and triple check on the Accord forums. Thanks for watching!
Very informative step by step!!! I have a question does the trim level matter? For an example I want to replace my 2020 Honda accord touring 2.0t with the bumper from a 2018 Honda accord sport, will it make a difference or would I need the touring bumper to be touring? Thanks for the feed back if you see this!!
Hi Mike, I did a brief look up on the design and fitment of the fenders/Hoods. It appears that the bumper will be direct bolt on and same as the 2020. Only thing I can possibly see would be foglight change, but that's just with experience from other vehicles converting from non sport to sport. Good luck let me know if I am wrong or right. Sorry I couldn't be much more help. If you need the parts go to www.ReveMoto.com
i’m trying to buy a bumper but it only gives the honda hybrid sedan model bumper is it the same for the still night blue accord sport as the one you are doing?
Hello! If you put in the year make and model, the product page should give you an option to select from the drop down menu. If you still have issues, please chat with us online and we can help you faster.
The easiest way is to just take the bumper off from my experience. Unless you have really skinny hands to fit into that small area behind the foglight via the fender liner. If you need parts for your car go to www.ReveMoto.com
Hello Mikey! Honestly, no clue. You can buy generic clips at auto parts stores but we recommend going to the dealership for them. They are about the same price and you get exactly what you need, specific to the area. You could probably check diagrams but 9 out of 10 times, the reps will know what your referring to. Thank you for watching!
Thank you for watching our video, it means a lot!
Where to Purchase : bit.ly/18-20HondaAccordFrontBumper
Our Website : www.revemoto.com
Thank you so much for showing the removal of the underside of the bumper! I had to ditch into a snowbank to avoid hitting an out of control BMW 3 series during a snowstorm. Hitting the snowbank didn't cause much damage, but it sheared off half of those little clips on the underside of the bumper and I've been looking for hours trying to find information on what the hell I need to replace.
FYI, this is the clip y'all: Clip, Bumper - Honda (91505-TM8-003)
Hi ! the clips are call push pins not sure the actual size, but go to the dealer and show they should have it. Fairly inexpensive and they just need your VIN number. Than you Rolando
Thank you guys this video helped me alot with my 2018 honda accord bumper and splash shield all the clips broke and this video helped me alot I appreciate you 🙏
Appreciate this tutorial so much Idk nothing about cars and this helped me fix my bumper clips easy
Glad it helped! We make these videos because there was a time when we we couldn't find good video tutorials. Thank you for watching.
Fire video and love how you gave the narration. 11/10
Oh man thank you for watch! Go to www.ReveMoto.com for any painted autobody parts.
Man thank you so much!! We try to make it as easy as possible! Go to www.ReveMoto.com if you need parts for your car.
Very Nice explanation. Great work dude
Thanks a ton! We're glad we could help.
You don't have to take the whole splash guard off. Nor the tabs in the inner wheel well. I've taken my front bumper off several times. To install my PRL inner cooler.
Thanks for the advice! It was our first time, so we took off what we thought and it isn't until the end we realized we didn't have to.
Yeah u only need take off 11 tabs underneath
Are there any screws to remove from the splash guard? Can we just pry the clips from the bumper instead of messing with the splash guard?
Is it necessary to remove the splash guard? I see that being additional work to remove that. You mentioned it’s hard to put it back towards the end. I just need to remove to readjust the bumper because the Honda dealership claimed to not cause an issue where the two corners by the front H were not caused by them. I had Honda replace ac condenser covered by warranty since I didn’t get any cool air. Honda dealers are not good. They want to do a diagnostic fee to check the bumper and won’t be free on top of labor. This video and your instructions are very clear and transparent. I want to do this sometime to fix the alignment issue to the headlights on the front bumper.
I think there is a way that you just remove the clips and screws along the bottom of the bumper. I am not too sure though
Do we have to change all the whole thing cause of the scratch on the cover
Hello and no. If you have a scratch on your bumper, depending on how deep it is, you can maybe buff it out. You can also repair the scratch and repaint the bumper. Thank you for watching!
Does anyone know if I could put a 2020 Honda Accord front clip on a 2016 Honda Accord coupe?
Hello! The fenders and hood only go up to 2017. So it doesn't seem likely without modifications. We would double and triple check on the Accord forums. Thanks for watching!
That splash shield supports to come off with the bumper..
It’s easier to remove with splash guard
Can you please name all the parts under the engine? Like plastic engine shield, inner fenders? I'm rebuilding a front crashed accord. Thanks
That would be a big task. You can probably pull the diagram from an OEM honda website. Just Google Honda Accord engine bay diagram. Good luck!
Very informative step by step!!! I have a question does the trim level matter? For an example I want to replace my 2020 Honda accord touring 2.0t with the bumper from a 2018 Honda accord sport, will it make a difference or would I need the touring bumper to be touring? Thanks for the feed back if you see this!!
Hi Mike, I did a brief look up on the design and fitment of the fenders/Hoods. It appears that the bumper will be direct bolt on and same as the 2020. Only thing I can possibly see would be foglight change, but that's just with experience from other vehicles converting from non sport to sport. Good luck let me know if I am wrong or right. Sorry I couldn't be much more help. If you need the parts go to www.ReveMoto.com
i’m trying to buy a bumper but it only gives the honda hybrid sedan model bumper is it the same for the still night blue accord sport as the one you are doing?
Hello! If you put in the year make and model, the product page should give you an option to select from the drop down menu. If you still have issues, please chat with us online and we can help you faster.
Can you just change the bottom where the fog lights are located ?
The easiest way is to just take the bumper off from my experience. Unless you have really skinny hands to fit into that small area behind the foglight via the fender liner. If you need parts for your car go to www.ReveMoto.com
What is the part number for the 2020 Honda Accord plastic push pins? I lost a few…
Hello Mikey! Honestly, no clue. You can buy generic clips at auto parts stores but we recommend going to the dealership for them. They are about the same price and you get exactly what you need, specific to the area. You could probably check diagrams but 9 out of 10 times, the reps will know what your referring to. Thank you for watching!
hey that happen to my car 😭😭😭
i just order a bumper from you guys
Thank you for trusting us Aleks! We'll be here if you have any questions.
easy peasy! Thanks!
You're welcome!
Where can the bumper clips be purchased at
Usually the dealership have them
Also Napa Auto parts has a pretty extensive collection of those types of things. I got some clips for my 2019 Accord there, and they fit perfectly.
Thanks guys.
buy this clips from china,equels 3.5 dollars per 100 lol but shipment cost not included
Hello. That is a great idea and we'll check that out. Thank you for watching!
is the process the same for a honda accord touring with the front sensors in the bumper
It should be very similar, almost identical. Just be sure to unplug the wire harness for the sensors. Thank you for watching!
I just need to replace my horns. Its wild I have to do all of this to access it.
Mine both stoped working?