Rear Backing Plate and Parking Shoes Ford F250

This is to replace the rear backing plates and parking brakes on my 2011 Ford F250 and applies various F250’s and probably F150’s and higher.
I’m pretty sure it’s the same setup from 2002 or earlier through 2016 or later. I know the axle nut socket worked on my 1992 F250 so the same axle nut is on both. Below are the part numbers and links to tools and parts I used.
Lisle 40750 Parking Brake Cable... www.amazon.com...
Parking brake shoes Power Stop B854 Autospecialty... www.amazon.com...
APDTY 159643 Rear Left Brake Backing Plate www.amazon.com...
APDTY 159642 Rear Right Brake Backing Plate www.amazon.com...
Dorman HW7311 Rear Parking Brake Hardware Kit www.amazon.com...
Rear Seal Precision 370247A www.oreillyaut...
Power Tool Axle Socket W83008 www.oreillyaut...
Sockets 10mm, 15mm, 21 mm, 24 mm
Wrenches 24 mm and 21 mm
Ratchets 1/4, 3/8, and 1/2 also an electric ratchet and impact helps.
If you need to clean the rust like I did I got a bunch of attachments at Harbor Freight and Amazon.
Pry bar, lug nut socket (mine was 19mm), brake clean, brake grease, synthetic grease, PB Blaster

[@lawrencetickle2706]

I wanted to add but kept forgetting that as far as I can tell none of the parts stores carried these backing plates in stock that I was able to find. Advance had an assembly that was $200.00 and it fit. I got it all installed and there was no hole for the ABS sensor. Then the rotor wouldn’t fit flush. Figured out it was for the duely version.