I tried to replace / clean my PM2 but sadly i have got an old version with fucki** red loctite in it....Even a soldering Iron doesnt break this stuff -_- I think i will have to live with it ^^. But good video !
Please tell me you are trolling with this video?...Why did you replace the washers to begin with? I have so many questions🤯....I will never buy a knife on the secondary now💀
@@justindhitchcock1806 I wont argue with you on that😂 Just not enough marbles loose for any of what went on in this video to make sense. This math aint mathing Jethro
May I ask why you would use pliers to remove the pivot? You will most certainly mar and degrade the action of the blade deploying and closing fouling up the pivot with pliers like that. Always remove the non D side of pivot first that way you have the scales and liner holding the pivot to remove the other pivot screw and then gently rock the pivot side to side to remove it with your hands. Also, are you sick here in the video? You seem to be breathing heavily like your working out or lifting weights doing nothing more than sitting on the couch? I hope your feeling better if so. Your respiratory system and breathing freely is essential to good health. Cheers buddy. I know those new washers are brand new but you would be amazed how much they clean up with a light polish on the blade and liner sides with a little flitz or higher quality polishing compound and some paper to hold the Polish on a flat surface or a dremel with a medium duty felt bit. Take care and god bless
@@justindhitchcock1806 sure thing, I like all things knives and guns so I try to watch and take in everything I can from everyone’s videos and experiences. Keep the content coming, take care
Love Pacific Sons. Great knife parts and great people.
I get all my knife parts from Pacific Sons too! Great video.
I tried to replace / clean my PM2 but sadly i have got an old version with fucki** red loctite in it....Even a soldering Iron doesnt break this stuff -_- I think i will have to live with it ^^. But good video !
Soldering iron? Why not use a heat gun? Or even boiling water?
was the pivot not in the D shape which made it stiff? I'm having this problem a new pm2 is stiff when the blade swings
The pivot is D- shape not sure what you did wrong I had to loosen up my pivot screws to get the blade right
Please tell me you are trolling with this video?...Why did you replace the washers to begin with? I have so many questions🤯....I will never buy a knife on the secondary now💀
I think you have a couple marbles loose in your brain
@@justindhitchcock1806 I wont argue with you on that😂 Just not enough marbles loose for any of what went on in this video to make sense. This math aint mathing Jethro
May I ask why you would use pliers to remove the pivot? You will most certainly mar and degrade the action of the blade deploying and closing fouling up the pivot with pliers like that. Always remove the non D side of pivot first that way you have the scales and liner holding the pivot to remove the other pivot screw and then gently rock the pivot side to side to remove it with your hands. Also, are you sick here in the video? You seem to be breathing heavily like your working out or lifting weights doing nothing more than sitting on the couch? I hope your feeling better if so. Your respiratory system and breathing freely is essential to good health. Cheers buddy. I know those new washers are brand new but you would be amazed how much they clean up with a light polish on the blade and liner sides with a little flitz or higher quality polishing compound and some paper to hold the Polish on a flat surface or a dremel with a medium duty felt bit. Take care and god bless
If I recall the pivot was stuck on I had to remove it thanks for checking my videos out
@@justindhitchcock1806 sure thing, I like all things knives and guns so I try to watch and take in everything I can from everyone’s videos and experiences. Keep the content coming, take care
@@mendoafgoo420 Guns -Knives & Flashlights .