Have you used the Headrush Core? How does it compare to this unit and which do you like better? It would be great to do a comparison. Nice review by the way!!
Hey dude, without watching the video if I know myself and my playing, then it’s likely that it’s melodic minor that you’re hearing 😊 kinda eastern, exotic sounding right? I use that a lot in what I do. I love the sound and vibe. I have some tutorials on my channel somewhere called ‘Masala Guitar’ where I explored these - mainly in the context of creating Indian sounding rhythm and lead lines - that you can check out. Enjoy and have an awesome day!
Hey dude, yes that’s possible - there are two inputs on the Stage and you can set up a parallel chain so that you can run different setups for each input. Have an awesome day!
Hey dude, Engl amps are very cool but not my personal tone 😊 🙏 The only one that I have really falled in love with is the Ritchie Blackmore head which was kinda ironic as it is Engl's take on a Marshall 😊 🙏 Great amps though! Have an awesome day.
Yes, it can be done on the stomp too. Same sound engine in that one. Of course, there is less scenes available - just 3 - as there are only 3 switches on the stomp. Have an awesome day!
Hi am your new subscriber really like your channel.. There's some problem am having in my ampero stage 2 there's no sound from headphones when I using headphones.. Also can you pls tell me how to use ampero in my daw nuendo pls help me..
Hey dude, so sorry to hear that you're having some trouble with the unit. The headphone jack itself might be faulty but first thing to do is try a couple of different pairs of headphones to see if you get the same result. If it is still not working then message the Hotone support team as they will be able to help and if it ia a hardware issue then they can advise about what to do. Have an awesome day!
Hey Glen, yes that’s possible to do - you can change the parameters of each block/amp/effect in each scene and then save the scene that way so that you can lower the gain on an amp for a cleaner or crunch tone, turn it up for a lead tone, turn down the effects mix, etc, etc. I think I have another tutorial video on my channel covering that which you can check out, or it might be somewhere on my full review video 😊🙏🏽 hope that helps! Enjoy and have an amazing day!
Hey dude, yes that can be done. You can set it up with a Parallel effects chain and set one chain up for the guitar and the other for the bass. Both will run in mono. Hope that helps. Have an awesome day!
Yes, you can whichever combination of amps you’d like. The only limitation is the DSP which can run out with too many amp or effects blocks. Have a great day!
Hey dude, yes thats possible to do. You can set up dual amp chains either via Y-to-A/B or parallel chains and then set for example one output to the unbalanced outputs, one to the FX Send and it will output the different amps to to the different outputs. It also works with the USB where the first output goes to outputs 1 and 2 in the DAW and the second chain goes to output 3 and 4 in the DAW. Hope that helps. Have a great day!
Yes, you can set it up any way you like - rock, metal, thrash, etc - it has plenty of amp models available (Boogies, Diezels, Engls, etc). Have a great day.
Just bought one. Excited!!!
Very very cool! Have fun with it when it arrives! Have an awesome day!
Once again you leave me amazed. Beautiful unit
That's awesome you had a cameo by Leon Todd in there. You guys are 2 of my favorite guitar YT'ers.
Thanks Dave! Very kind of you man! It was pretty awesome having Leon play on the track 😊 🙏 Have an awesome day.
...and will have full blown capturing capability by the end o fthis month with an update. It's pretty amazing!
Have you used the Headrush Core? How does it compare to this unit and which do you like better? It would be great to do a comparison. Nice review by the way!!
I haven't used it - they look very cool though, especially the amp matching/profiling function. Glad you enjoyed the review. Have an awesome day.
Hey JP… What scale are you using during those solo/lead bits?
Hey dude, without watching the video if I know myself and my playing, then it’s likely that it’s melodic minor that you’re hearing 😊 kinda eastern, exotic sounding right? I use that a lot in what I do. I love the sound and vibe. I have some tutorials on my channel somewhere called ‘Masala Guitar’ where I explored these - mainly in the context of creating Indian sounding rhythm and lead lines - that you can check out. Enjoy and have an awesome day!
Can two channels be created to use two amps, one for each channel to create the stereo effect? Thank you
Hey dude, yes, that can be done too - I think I show that on another video, I can't remember for sure 🙏 Have an awesoe day!
@@jayguitar Thanks, I'll try to find it on your channel, greetings
Hi Jay, can I connect 2 guitars and setup with independient signal chain like a Quad Cortex?
Hey dude, yes that’s possible - there are two inputs on the Stage and you can set up a parallel chain so that you can run different setups for each input. Have an awesome day!
Does all this work with a stomp? Besause, if I understand well, they have the same software.
I am guessing that it will as the software is the same now. Have an awesome day!
Jay........ya gotta try an Engl Ironball SE.Amazing amp.
Hey dude, Engl amps are very cool but not my personal tone 😊 🙏 The only one that I have really falled in love with is the Ritchie Blackmore head which was kinda ironic as it is Engl's take on a Marshall 😊 🙏 Great amps though! Have an awesome day.
Can we do the same on the stomp?
Yes, it can be done on the stomp too. Same sound engine in that one. Of course, there is less scenes available - just 3 - as there are only 3 switches on the stomp. Have an awesome day!
@ Thanks a lot Jay
Hi am your new subscriber really like your channel.. There's some problem am having in my ampero stage 2 there's no sound from headphones when I using headphones.. Also can you pls tell me how to use ampero in my daw nuendo pls help me..
Hey dude, so sorry to hear that you're having some trouble with the unit. The headphone jack itself might be faulty but first thing to do is try a couple of different pairs of headphones to see if you get the same result. If it is still not working then message the Hotone support team as they will be able to help and if it ia a hardware issue then they can advise about what to do. Have an awesome day!
@@jayguitar hi jay thanks for your advice i emailed them hotone and i got the settings from them..now its working
with the scenes - u can only turn blocks off and on - can you adjust settings within a block between different scenes?
Hey Glen, yes that’s possible to do - you can change the parameters of each block/amp/effect in each scene and then save the scene that way so that you can lower the gain on an amp for a cleaner or crunch tone, turn it up for a lead tone, turn down the effects mix, etc, etc. I think I have another tutorial video on my channel covering that which you can check out, or it might be somewhere on my full review video 😊🙏🏽 hope that helps! Enjoy and have an amazing day!
@@jayguitar great. Thinking of buying one. I have a helix LT and want something way smaller.
Can a guitar and bass be plugged and used at the same time?
Hey dude, yes that can be done. You can set it up with a Parallel effects chain and set one chain up for the guitar and the other for the bass. Both will run in mono. Hope that helps. Have an awesome day!
@@jayguitar Awesome! thank you!
can i put 2 amps mesa dual rec?
Yes, you can whichever combination of amps you’d like. The only limitation is the DSP which can run out with too many amp or effects blocks. Have a great day!
Can we split 2 amps/cabs to L and R out put
Hey dude, yes thats possible to do. You can set up dual amp chains either via Y-to-A/B or parallel chains and then set for example one output to the unbalanced outputs, one to the FX Send and it will output the different amps to to the different outputs. It also works with the USB where the first output goes to outputs 1 and 2 in the DAW and the second chain goes to output 3 and 4 in the DAW. Hope that helps. Have a great day!
can it sound like pantera, lamb of god, metallica? im planning to start youtube metal guitar covers
Yes, you can set it up any way you like - rock, metal, thrash, etc - it has plenty of amp models available (Boogies, Diezels, Engls, etc). Have a great day.
Thanks for the tutorial!! Unit is awesome! But the testing track sucks a$$ (sorry)
Glad the tutorial was useful. I guess we will have a to disagree about the track because I love it 😜🤣 Have a great day.
👍👍👍👍