IoT based Energy Meter Reading and Home Appliances Controller | smart energy meter reading

IoT based Energy Meter Reading and Home Appliances Controller | smart energy meter reading
Code and Schematics Download link:-
existing reading system is a time consuming and it needs a numbers of labor to. The proposed project will eliminate the need for labor and it is a cost efficient. The proposed system gives the information about the energy consumption on real time on IoT dashboard on mobile application and PC, billing through IoT, This smart energy meter protect your home from bad supply, alert the consumer and utility when the energy consumption exceeds above the set limit and the disconnection and reconnection of power through a mobile application when the residential are out of station to prevent the wastage of energy.
Components Details () {
arduino uno:- marobotic.com/product/arduino...
nodemcu wifi module:- marobotic.com/product/esp8266...
lcd display 16x4:- marobotic.com/product/16x4-lc...
4-Channel 12v Relay Module:- marobotic.com/product/4-chann...
potential transformer:- marobotic.com/product/potenti...
current transformer:- marobotic.com/product/potenti...
4007 diode x 10:- marobotic.com/product/4007-di...
10k potentiometer x 2:- marobotic.com/product/10k-var...
10k resistor x 2:- marobotic.com/product/10k-res...
10uf capacitor x 2:- marobotic.com/product/10uf-ca...
100uf capacitor x 2:- marobotic.com/product/100uf-2...
12v 2amp power supply:- marobotic.com/product/12v-2am...
}
Muhammad Ansar
[phone]
Visit My Website:- marobotic.com/projects/

[@anupchakraborty8700]

Excellent 👌👌👌👌👌

[@anilbabub.s6668]

Wonderful project

[@Mukesh-vo2yr]

Very nice Projects 👌👌👌

[@MuhammadAnsar]

thank you

[@i.m.rajdeepchaudhary]

aur kya hum isme improvement kar skte hain means future scope kya hai iska

[@HomeAutomationTECH]

Nice bhai

[@MuhammadAnsar]

thank you

[@nikahpk]

Mashallah

[@MuhammadAnsar]

thank you

[@itsmewendy9704]

Hello, Sir! Can you do a tutorial with this and instead of a website, can you do it with MIT App Inventor? Please help me with this query. Thank you, Sir!

[@mahbuburrahmanrahman2677]

Assalamualikum, Hope you are well. You are very experienced regarding arduino/ESP boards and I need your guidance/assistance that is Do you tell me Is it possible to control AC FAN dimmer (with zero cross detection) both By two Physical push BUttons (for speed increasing and decreasing) manually and also By Blynk app slider button for controlling speed through wifi.only zero cross detected esp8266 family board and blynk app slider button based AC fan dimmer code is available in internet but those are not manually controllable at all when wifi is not available. I ask the question because facing very difficulties to write the code for integrating push button function with only wifi controlled code (By blunk app slider button) . do you know is it possible or not ?

[@MuhammadAnsar]

yes it's possible

[@mohammedabdulghani7545]

Assalamualaikum brother
Mashallahh Tabarakallah ..
can you please share the link of code, server details etc,. Which is required to complete this project

[@markjaysantos4357]

Can I have the codes and schematic diagram on this project, thank you 🥰

[@anilbabub.s6668]

First comment

[@MuhammadAnsar]

thank you bro

[@Abdullah.224]

Sir do you sale the project?

[@tukurabubakar2811]

Assalamualaikum Muhammad please can you share the code and schematic link thank you

[@AjaySharmaIND]

What is the total cost of this project in Indian Rupees?

[@syedameerhamzaaskari2019]

Sir please is project ki detail mil sakti hain

[@lovely2639]

Are u doing commercial production

[@MuhammadAnsar]

no student project

[@adeshinaajibola5114]

pls the download link

[@vikramjeetpaul]

Hello sir, can you plz make an Arduino powered light meter using LDR, so when too much light falls the all the less will turn ON and when it''s less all leads will turn OFF. It will be really grateful if you can make this project as earliest as possible, thank you

[@MuhammadAnsar]

Check this video
th-cam.com/video/fc-bC_HJ2Lk/w-d-xo.html

[@vikramjeetpaul]

@@MuhammadAnsar yes sir I saw this... Instead of the LCD 1602 and relay, can you please make another video where the LEDs are to indicate the amount of light falling on the LDR.
I want to make a light meter

[@MuhammadAnsar]

@@vikramjeetpaul ok bro

[@vikramjeetpaul]

@@MuhammadAnsar
OK sir... Thank You I am really waiting for the video to come... 😊🙏🙏🙏

[@MuhammadAnsar]

@@vikramjeetpaul welcome

[@KarthiKeyan-io1mu]

i need this, kindly revert me

[@diaryiklanlucudiarylancu8367]

Please share tutorial and coding sir 🙏?

[@MuhammadAnsar]

ok

[@diaryiklanlucudiarylancu8367]

@@MuhammadAnsar 🙏

[@tahirkamboh147]

Please share full tutorial

[@MuhammadAnsar]

ok bro

[@tahirkamboh147]

Dear full tutorial is still not uploaded. Please share it

[@gecgn_update]

Tutorial link send please 🙏

[@MuhammadAnsar]

tutorial is not available

[@SukhsagarTiwariEECB]

Do you sell the project

[@MuhammadAnsar]

yes. Where are you from?

[@SukhsagarTiwariEECB]

Mumbai

[@SukhsagarTiwariEECB]

I want to buy this project how much it cost

[@anupchakraborty8700]

Excellent 👌👌👌👌👌

[@MuhammadAnsar]

Thanks a lot