Audi a7 c7 full interior trim removal & carbon wrap
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Watch me explain and show how to remove full interior trim in my Audi a7 c7 model, it's almost exact the same in a A6 c7 model.
If you did find this video useful, please be sure to hit that like button!
Did not understand a word and still a great how to video showing all one needs to see and know. Great work!
Thank you so much! Trying to explain it in a Way, so hopefully everyone Can understand 🫡🏁
thank you for this video! it is the only video i could find on youtube and even though i couldnt understand a word you still did an amazing job with context clues to help remove the trim pieces. one thing i did understand was how much that center dash bolt near the windshield was a pain in the ass lol
You’re welcome! So happy to hear this, thanks man :-) and yes… even though it’s in Danish, I think you get my point, that top bolt was a bit of a fight. Haha ;-) please sub, and have a nice day!
I understand one word every 5 minutes, but I can see what you do 🤣🤣🤣🤣
The most important thing is that you understand the meaning 🤣🤣 im happy that you did, its my pleasure 🏁🫡
As already said, brilliant video. Couldn't understand a word you was saying but totally understood what you was doing if that makes sense.
Thanks for comment! So happy to hear ;-) haha, you’re not the first mentioning that. Thanks again!
Brilliant done doors so far, you said a6 C7 is almost the same
Go tell me that to do around gearbox you dont have to take the whole of the centre console 😮😮
Thanks Anna :-) haha, that why its “almost” the same procedure 🤪 hope you’ve got the job done no matter what.
Thank you man! This was what i needed cause i bought me a new interior for my A6 4G in Beaufort :)
You’re welcome! Thanks mate 😃
@@parap-performance Dude would it be possible to make a video of the disassembly of the first part under the windshield? So this long bar which sits under the windshield.
that would really be a dream!!!
thank you very much
ville det være muligt at lave en video af adskillelsen af den første del under forruden? Altså denne lange stang som sidder under forruden.
det ville virkelig være en drøm!!!
mange tak
@@KingpinAmir1985 all u have to do, is in the beginning/first part of the video, if you have any doubt, please text me.
1: remove A-pillar Left/right
2: remove small plastic under pillar
3: remove 2 x torx screw left/right
4: pop up, speaker cover and remove
5: push the sensor up from the bottom, through the opening from the speaker you just removed.
6: remove the bolt, and be careful not to damage your windshield.
7: last part is to unplug wiring for left/right speakers, then it’s only being held with clips, pull up, and it’s out ;-)
Thank you Bro but a Video where i can See every step would be so great ...
Thank you anyway !!! :)
I would like to make a short video, but the car is sold ;-) text me, if you need any help/advice.
Peace ✌🏽
Thank you so much for the video. I’ve bought a genuine RS7 dash trim set (real carbon) and this video will be my guide to install it!! Thank you!! 😊
So happy to help you out! I was looking for a genuine as well, but the price on a full kit is insane 🤪 be sure to check out my other videos !
@@parap-performance £950!! Just fitted it today. Looks amazing
@@dankiddd so happy to hear! Have a awesome weekend :-)
I need this for A6 C7, but this helps a lot especially for upper trim under windshield. Thanks a lot 👍
You’re welcome. Im glad i could help, did you understand my danish language? 🤣🤣
@@parap-performance I did understand you said pain in the ass for middle screw behind center speaker 😄
@@benjamindoko2356 haha, you’re right! 🫢👍🏼
@@parap-performance I did mine in glossy black but not with foil just repainted with black paint, looks great
@@benjamindoko2356 glossy Black 🤩 sounds very Nice, i just dont wanna spend 1500$ for OEM Carbon 🙈
Can you share how to replace the lid/door on a 2012 A6 c7, my broke it, and need to replace it?
The car is sold, so unfortunately not m8 ;(
To remove central Console Trim you need to remove whole console? Can I access bolts while console is still in the car and remove just silver trim?
@@PejovicMilos the best and easiest way is to remove the whole center console :) then remove the trim part.
Did you use any tools to remove upper dash? I removed 3 nuts but it is still very tight.
Only nuts in both sides, and the bolt in the middle, then you just have to pull it upwards, start from both sides, it’s just clips ;-)
@@parap-performance thanks for replying. Do you need to take special care on those speakers. Seems they are connected by some cable
@@aaronzhang582 you dont have to remove the speaker, only the small grill/cover :-)
Do you know how to remove c pillars to take out the headliner on Audi a7
It’s almost the same as on this S4:
th-cam.com/video/afq1Pmu0r24/w-d-xo.htmlsi=p1076z7ekbJEnS3w
Hope it helps! :-)
@@parap-performance thank you had send the client back to reschedule because I never came across a headliner like this thank you with the rear pillar like thata
@@jonathanocampo2144 you’re welcome!
Just be careful not the bend the headliner, and remove the rear “panic” handles aswell :-) have a nice evening!
Great work, how much did you pay for the carbon trim?
Thanks man! :-)
56$ ( 7D glossy Carbon - eBay )
Good job
Thanks mate! I see you have got a A7 aswell 🫡
Hello, did you change the colour of the steering wheel elements? Mine are silver, i want to do them gloss black
Hi Daniel. Yes i did, mine was also chrome & i wanted it to be blacked out. So i removed the airbag, and began to tare it apart :-)
It’s a time Consuming job, but it’s worth it.
Send the steering wheel to me in Denmark, and I’ll handle it for you 🤗 or maybe I should do a how to video?
@@parap-performance thanks for answering, i guess a how to video would be best for me. Please explain how you did it, tools needed, safety recomandations, if you used paint or wrap, how good it looks after x time
Thanks
@@danieltene2048
First of all, you remove the connection to your battery for safety caution ⚠️ start removing the airbag from your steering wheel. Then you remove the plastic cover from the “airbag-bag”, it’s being held on with metal clips, loosen/bend them with a flat head screwdriver, and you need to be very careful with the bag itself for the airbag. From fabric it’s fold in a certain way, so have in mind that you need to place it exactly the way it “lays” in the cover when you mount it again.
Now you have removed the black plastic cover from the airbag.
The emblems:
These are melted on the inside. I used a solding-machine to warm up the spots. After that you can remove the emblems and start painting. I used normal plastic ground paint 2 layers, and 3 layers of black gloss paint. Remember to melt the emblems on the inside again.
Be free to ask, I hope this will help. :-)
Thanks. 😃
Great work, but that carbon wrap looks really cheap and fake.
Thanks, indeed! It could be so much better yes ;-) but for the price it was ok.
Thx 👍