I expect this mower will last several seasons with decent care. th-cam.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
I was sold on the subscription when you pointed out your mistake. That’s genuine and exactly the type of people I want to be watching and taking advice from.
I appreciate that. I am different than the other guys fixing mowers on TH-cam, I don’t do this professionally and thus make a lot of mistakes. But that is half the fun right, welcome aboard.
Mower Mike, I was having hydrostatic transmission problems with my Cub Cadet ProZ 500/560 until I watched your video. I followed a few of the tips you offered in the video. Thanks to you and less than an hour of my work, I was able to resolve the transmission problem WITHOUT having to pull the transmission. I'm from Texas and living in Virginia. Keep up the great work & posting brother!
That is great to hear. Thousands of people of watched that clip but no one has actually told me it helped them fix their issue till you. Time to get to mowin!
Great video but watching you digging and poking with that screw driver instead of using the proper puller is nerve racking as you could damage the seat of the seal.
Auto transmission internal expanding snap ring pliers have serrated outsides for flat snap rings to expand outward. Just insert into plug bore and squeeze for a good grip on i.d. of plug bore and pull out. No screwdriver frustration or risk of damage to seal or bore. You're welcome!
Hi Mike, Tori here. Thanks so much for the video! My Troy-Bilt Mustang RZT 50 trans’ (BOTH) feel weak and are whining. I’ll take a look at “him” (I named my Zero-turn “Steve”🥰) today to see if the trans’ are serviceable. If so, I am confident I can make Steve strong again thanks to your very clear and concise content. I just subscribed to your channel because, well, Steve has a few things needing repaired. If I’m being honest, I have downright neglected poor Steve because working on zero-turn mowers was intimidating before finding your videos. One last thing. I want you to know that your content is not only helping me, a single mother, save a TON of money, it is also being utilized to teach my two amazing young men (13&14) essential life skills! They may not have a man in their lives to teach them “manly” skills, but mama’s got their back! Thanks again for sharing your skills so I can pass them along my young men. You are a blessing! Many blessings, Tori Me: *Walks out to check on Steve singing ‘INVISIBLE’!* 🤣😂🤣
Well, as you may have guessed, they are not serviceable. 😒 I need to order some parts and seals etc. from Amazon and crack them open one at a time to service them. I’ll be doing lots of research first though. Wish me luck. 🤣
Ah shucks you are making me tear up here. I appreciate the kind words. Good luck with Steve just take it one step at a time. I will keep churning out videos so I can teach those boys everything I know about wrenchin! My dad didn’t teach me a thing about working on stuff, is all self learned. Whatever their passion is in life they will find a way to dive in and learn. Mine just always seemed to involve speed and gas motors lol.
One more thing, before you start tearing apart the transmissions make sure Steve has a good tight belt. It both trans are equally whining and weak I doubt that they need to be rebuilt. Usually it would just be one goes bad. My guess is the belt is loose or worn out since that belt runs both transmissions.
That is a outstanding video I have never done it and it would been nice back in my younger times to work with motors I have an LT1000 Craftsman and it does not want to move now I can start looking thank you very much
I run heavy-duty, hi-lift blades. Lift is created by the kickup on the back of the blade. The megmo blades don't have much of a kick up. I've run X blades but stopped because my machine is a high end residential mower and you need a commercial machine to run them.
Really great video and awesome explanation on how these hydrostatic axles work. I am a small engine tech and have a business in Kaneohe Oahu. I'm working on a Z4200 Toro zero turn mower model 74360. The right side transmission works great but the left side just barely turns. The belt seems a bit loose but we didn't think that was the issue since the right side works great We've made sure there is fluid and have did all the adjustments we can think of but it still wont turn any faster. Is this transmission in this Toro the same as in your video ?? If not ,what else could cause this transmission to not operate properly. Thank you for the great video.
Wow I had to google that town, long way from Texas. Random Wikipedia fact did you know Kaneohe was home of the Hawaiian royals and they had 30 royal fish ponds! Wow what it must have been like to fish in a royal fish pond! Well after all that I have to say I have no idea about you hydrogear. Everything I know about those transmissions is on that video. You can always just take it off and rebuild it. There are some other videos on that. Good luck!
I really appreciate your post, I’ve been having trouble with the steering on my Badboy for a while now, I was about to trade the ol boy in I’ve had it since 2011 BUT i watched your video with an easy fix (loose belt who would have known not me lol). Running like a new champ again. Thanks for sharing your knowledge and advice.
Great video bro ❗️ Thanks for sharing ! I guess it’s time to upgrade some parts . I wonder if upgrading to a bigger spindle on the engine side would make that transmission (pump) to spin faster, thus producing a higher pressure. Good luck with your projects !
This may be unrelated to the video, but I do have a 2009 Cub 48" ZForce. The problem I'm having is, the left lap bar seem to be lagging the right one. What I mean is, the left bar when pushed forward seems to be working against the right bar. It's as though it's acting as a brake from going straight, or esp, from going faster. If I use just the right, it goes fast and seem fine. How can I adjust this left bar to make it track like the right one?
Mike - I have a 2006 husqvarna ez4217. My right side just went dead on me. Spins fine in forward and reverse on jack stands but no go under load. Has like a shuttering sound like it’s trying but it just won’t grab. Ever come across this, any ideas? I changed the fluid and it looked like coffee with a lot of creamer but I didn’t see and metal shavings anywhere. Im also able to turn the wheel even without the bypass lever engaged. Thanks
Got the same problem with Cub Cadet ZT150. Pulled under shed after about four hours mowing all was well. Next day right axle wouldn't turn, took my truck and pulled to my shop after disengaging pumps, but right wheel is locked and dragging like a brake was on the right side. Any ideas would be GREATLY appreciated? Both sides have a few vines around axle, but left side functions fine with same or more debris around it. Going to lift up tomorrow and see if I can tell what's going on, have a bad leg so it's tough to get under it. Used to have small engine shop 40+ years ago, but not familiar with zero turn hydraulic drives. Thanks in advance to anyone for advice.
Hi Mike. I have 2 mowers I have to work on. My 2014 Cub Cadet Z-Force L 48 has a weak left drive. I have not really looked hard at it, but I now it has a good oil supply. My other mower is a 1996 725 Grasshopper gas 3 cyl. Again the left drive is weak. It has 1510 hours on it. I recently purchased it from a man who let it set a long time. It has the drives that has the filters on it, and a supply tank for the oil. Do you have any idea why the left drives seem to go out and the rights are still strong? I am used to larger transmissions, as I just rebuilt the Allison 6 speed in my box truck. I wanted to say thanks for the info as where to get the parts. That saves a lot of time. Smiles!
Both trans are completely independent so there is no reason one would go bad over the other. It just means that either the belt is slipping on that one or it’s seals/internals are weak. But before you do anything check the handle, there should be an adjustment screw on each side that will allow you to push that handle further forward than the other. Showing that screw is a good idea for a video now that I think of it.
Hey Mr. Mike....hey what causes a hydro to work great at first then after some use it starts getting noisy and eventually doesn't want to pull...it sorta jumps in a way
Just replaced my zt2200 non-serviceable hydrogear I’m getting a whining noise.( What causes this) New belt installed and was told the new pump comes preloaded with oil Ive seen notes that refer to a friction pack nut to loosen 1-2 turns …. Can you help I don’t wanna spend another 850 for a new pump
I suggest making sure it is topped off with oil. Remove the plug on the top of the case with a 3/8 in extension. They will whine when they are low on oil or have not been bleed right.
What would cause the fwd/rev lever to have slack in it between fwd and rev function?.. everything is tight on the linkages, except something "internally"... Specifically, moving drive lever towards reverse, it moves about 2" more than the other side, with a slight "detent" feeling before engaging reverse, a bit rougher than it should.. The right side is as smooth as a perfectly operating hydrostat drive should be, but the left side has developed a problem...
There is a dampener arm that goes from the arm to the top of the transmission. My guess is that it is wore out, they are super easy to replace. Good luck!
Get a set of picks from Harbor Freight. There are several in different configurations for $ 1.99. They are awesome for removing O rings and such. You might want to sharpen them a bit if the points are a bit dull.
How about the non serviceable transmissions? Do you have any tricks for those? Cubcadet is requesting me to change the whole left transmission and I just can’t pay for it right now! Help please
I have all sorts of videos on that. Check out my playlist. You will have to remove it to flip it and drain it. It is a PIA I would leave it alone. th-cam.com/play/PLo4VDcnI4eoh-1nKTw_e3J5UkKEDlKSnk.html&si=ctpCzqahO9RAwEVt
Hey Mike thanks for getting back with me. Hat off to you brother for these very informative videos you make for all of us. I just did mine ordered the fluid it took about an 45 minutes or so to finally get it running smoothly again! I couldn’t have done it without your guidance!!
Good video. I did change out the o-ring on both of my ZT-2800s since they leaked. Of course, also changed out the oil and filter on both after making sure I could remove the air bleed screws. Yet, even after going through the purge cycle 6 times, my left hydro no longer works. The disengage seems to be working correctly I verified that I put the pump cover on in the right configuration. I am at a complete loss now as to why I cannot get it to work at all any more.
@@MowerMike - Appreciate the reply. Turned the pump cover 180 degrees. I cannot for the life of me figure out how I got it turned. Even a service manual shows the cover was on right. Oh, well. Live and learn.
How do you replace a "hydraulic dampener" no a Hustler Dash? They told me that is wrong what's with mine and I don't even know where to find it. Is it a DIY repair? (my left control arm is not hitting the safety switch)
If you look at the bottom of the forward/backward control arm there is a rod connected to it that connects that arm to the top of the transmission. It should have a clip in each end that pops off, is super easy to replace.
I'm here to very carefully explain that this is extremely valuable to me as a landscaping business owner who functions as his own mechanic. Thank you for these in depth, high quality videos.
I know this is an old video but hopefully you read this and can help me out. I dont see any leaks. Does that mean my seals are good or should I still open it up and replace them? Spring is tight, drive belt is tight, no leaks that I can see. Only one side works and the other doesn’t.
The video said you over tightened and stripped bolt holes. Did you just retap the threads to fix? Mine is still leaking because I think I did the same thing and wondered how to fix it.
Hey Mike. I have a used exmark radius x. Ever since I've owned it, the steering levers have been super flimsy. I struggle to go in straight lines at higher speeds. It feels like there's little no to resistance on the levers. I also notice that my hydro fluid is below the full line. I've tried replacing the dampers and it didn't change anything. Do you think I would just have to replace the hydro fluid ? Or is there something else at play here ?
Great video, but I'm surprised you didn't mention to check for sloppy arm linkage where that Allen bolt gets lose. That is my problem with the same mower in your video and I'm searching now how to fix it.
@@tennesseejed884 Where the black control bars join up with the gold pieces that go to the transmission linkage, there is a poorly designed joint with an allen bolt. When this bolt gets lose, you lose some of your forward and backward control. I fixed the right side on mine and it's like new now. The left side is harder to get to since you have to take some panels off, and I haven't fixed it yet. Always check this first. So happy I don't have transmission problems like I first thought.
I ordered some replacement oil for my zero-turn transmissions. I got some high zinc motor oil of the correct viscosity. But I noticed it is "NOT" synthetic that won't make a difference will it?
Those little seals are called triple o ring seals. On my 14 year old ZT3100 Hydro's the right side was making screaming noises as those triple o ring seals had dried up shrank and hardened over the years. The dealer told the previous owner they needed to change out the whole hydro for big bucks. The owner balked at that and sold it to me as a project for a very fair price. Mine was so old that those little seals were actually just double o ring seals. They had shrank as were loose in the bores (Hence the screaming noise of high pressure oil bypassing them) making it pretty easy to wriggle and then pull out. I lubed up two new seals and pressed them in. Installed the upgraded cover and gear and o ring kit to replace the bottom cover. Did a thorough burping procedure and all set! It did take a few hours of use to then fully burp the system and stabilize oil level in the tank. But it's been running like a dream now all Summer for me! Thank you for this great info!
I have a Dixon speedster 42" old er mower. last fall one side stopped turning. we tried adjusting a few screws and its still stuck not moving. then I got underneath it and saw it is leaking from the hydrostatic gear box...please forgive me if I dont know the correct names of thing, btw. I am just an old lady trying to keep from having to replace it til I can afford to (I have a 7 grand vet bill I am paying off right now) I called the place where we bought it and they dont even sell them anymore. They tried to sell me something new. they said the hydrostatic system is closed and has to be completely replaced if it is leaking and its thousands to replace. so I happened to see a video the other day by Scotty Kilmer talking about amp-205 and it stops leaks and can be used in a hydraulic fluid. Is there a way to add this fluid to the hydrostatic steering system ?
I have a Dixon speedster 42" old mower. last fall one side stopped turning. we tried adjusting a few screws and its still stuck not moving. then I got underneath it and saw it is leaking from the hydrostatic gear box...please forgive me if I dont know the correct names of thing, btw. I am just an old lady trying to keep from having to replace it til I can afford to (I have a 7 grand vet bill I am paying off right now) I called the place where we bought it and they dont even sell them anymore. They tried to sell me something new. they said the hydrostatic system is closed and has to be completely replaced if it is leaking and its thousands to replace. so I happened to see a video the other day by Scotty Kilmer talking about amp-205 and it stops leaks and can be used in a hydraulic fluid. Is there a way to add this fluid to the hydrostatic steering system ?
Haven’t found too much to help me out maybe you could point me in the right direction…mine isn’t leaking nor have I really noticed any sort of power loss or slippage. Mine are simply making a loud whining/grinding noise for a few minutes then it’ll stop then it randomly does it again. I haven’t noticed anything loose underneath whatsoever.
Good video! Do you know if the Hydro-gear 2200 series can be serviced? I am thinking abut purchasing a Cub Cadet ZT1 50 which comes with hydro-gear 2200. Thanks.
5-7-23, 2000 hours, upgraded both charge pimps, when purging air on right transaxle I was reengage the bypass arm and heard a small pop noise. Ever since right side starts to pull than stops. Any thoughts would be helpful. Thanks in advance Jim
Wow that is alottt of hours. The pop is probably coming from the linkage somewhere between the handle and the throttle. I would take the wheel off and move the handle back and forth and see if you can find where it is popping. As far as stopping you may not have it bleed all the way, I would keep working on the bleeding procedure. Good luck
So I opened up my hydro gear 3100 on a 2011 z force S. Took the pump off, it was def leaking. But I was surprised when I didn’t find any pump seals to remove. Do some not have them?
Hi Mike, I bought a used cub cadet zero turn zt1. I've been noticing that it sometimes whines and struggles to reverse to the right. Any idea what to check?? Thanks a lot for all the advice...
anyone out there have any advice for a 3 year old ZT1 50 that is leaking transmission oil from one side? I would assume it's a seal, but trying to find info on how I can do it myself but not having any luck...
First step is to see if it is leaking from the axle seal (seal around the shaft) or the actual seal between the two main halfs of the transmission. Both or fixable just find out where it is leaking and do some research
I'm using a Hustler Raptor SD. After about an hour of continuous running, the right side starts to make a grinding noise and loses function. After sitting and cooling off for a while, the symptoms aren't present. Any ideas? Could it be the part in this video?
On my comment that I had posted I was having an issue with a zero turn z4200 toro and what do you think the problem was ???? The belt was slipping on the left side pulley. We put an additional spring to tighten the belt and that Silver the problem ,but we went ahead and installed a new belt with a heavier spring and the mower runs and turn great.
My dad has an early 2000s tank with Kawasaki 23 hp engine and it is leaking between the motor and pump on the left side. The hydraulic oil is just 20w50 engine oil. Have you ever worked on one of them?
It is similar to this one. If it is leaking along the main seal on the hydro you will probably have to take it off and take the cover apart and re silicon it.
Wow, exactly what I need to do! Thank you. I have a problem. My 12 YO Exmark Phazer model PHZ19KA443 s/n 641119 has Exmark part number 109-2240 for the trans-axle. It looks like the one in this video but maybe different. To get parts I need to know the Hydrogear model this trans-axle is. Is there a cross reference to get this info? The parts manual does not give part numbers for the components of the trans-axle so I am dead in the water. Any help greatly appreciated. parts for a trans-axle this old are not easy to find. Thanks, Doug
im wondering if this is a fix to my issue. When im cutting thicker grass it boggs down going forward but not in reverse. Same thing when I dont have the pto engaged and Im going uphill. I have a m48 tank from 03'.
Well I assume by M48 tank you are running a Cub Cadet zero turn, or is it the M48 main battle tank we used in Vietnam?? en.m.wikipedia.org/wiki/M48_Patton So if you are running the Cub you may just have a belt that is slipping under load. Check out this video and check your tension and spring. th-cam.com/video/S9JZtya3qsM/w-d-xo.html
Any advice on when they get jumpy? For example, when I am turning, it starts turning ok, then the tire will sometimes just stop...making it jerk. Thoughts? Thanks!
My turo mx5060 cuts for about an hour then my left hand drive motor gets really weak and makes a whining noise. Any suggestions on fixing this problem.
Having problems with mine rightnow.. when i stopp and make a sharp turn my transmission slips and when i go straight, it doesnt catch back until about 2-3 seconds of going straight. Going to try these
Damn right I’m winning at life. Born a leader.. lol Thanks for the information ! Mike… what an awesome name. Wish I had a cool name like mike. Mine is Ray Ray or back in The day Rockin razor
Never worked on that big boy but it should be similar. I have a drive belt change video on a Deere zero turn, check that out to get the belt out of the way and then you can drain the hydro based on my hydro oil change videos
I have a JD455 the right side control lever has a lot of resistance with engine not running,the left side lever moves freely,belt squeals on hard turns under load.machine does not have equal power left and right lever.Any ideas where to start ?
First I suggest check that it is full of hydro fluid. Then you can adjust the speed to match each side. If you already watched my videos and tried that I am out of knowledge for ya on hydro transmissions. Good luck, check out the video below on adjusting speed. th-cam.com/video/Ycrw0oAfr04/w-d-xo.html
Do you have a video on fixing/adjusting reverse? My forward speed is great, reverse not so much. Slow, sluggish and will not go up slight grade anymore.
My simplicity Courier has a leaking 1759444YP hydraulic drive. Is there some way to know if this is the same as a Hydro Gear ZD-AUBB-2A7B-3XPX ? Also, How do you replace the lost fluid ? Thanks. Great Vid !!
No idea but check out my videos on changing the hydro gear oil and you will see how to fill them. th-cam.com/play/PLo4VDcnI4eog75ESAm7eClMTZ50vTwQEu.html
Mower mike mike! what's up man! .. Hey that's the Tank! I have the grandfather of those (Lesco commercial plus or "m54" ztwo). You wouldn't happen to know the belt numbers for the 54 would you? or a place to find these belts without me having to take the beslts off, run miles up the road, play match maker and return back lol
My blades stop turning when I run into the grass . I ordered a new pto switch I’m not sure what’s going on . Can you help ??? Blades free of snags . The blades rotate but no strength now
Mower Mike, My Cub Cadet RTZ 50 has no filter or method of draining.. If I pull the bottom cover to replace the seals how can I replae the oil? Thank you for the video. It will be a great help.
Hey Mike I have a 2004 Mustang RZT Troy-Bilt zero turn and sometimes when I pull the metal parking brake back into drive the right side doesn't turn at all frontwards or backwards only the left side works and it goes and circles what should I do
Hi Mike have a huskarvana sweeper with hydrostatic transmission drive . Fitted new belt but doesn't seem to want to drive . Another thing that we noticed you couldn't push it without disengaging on off lever but now we can any suggestions.
@@victoriabanaston9773 Interesting, To disengage a hydro trans there is usually a separate lever to put it in neutral. You may check it there is an adjustment on the actual drive handle to see if you can get it to push further forward. On a mower there is a screw you can shorten to let you push the handle further. Sorry I am probably not much help, I don’t even know what an Australia packing shed is lol.
@@MowerMike your funny Mike same as your videos . It's where you pack oranges potatoes grapes and all other fruit and vegetables in boxes . If you Google k1250d karcher sweeper you will understand more. But as you have stated most of these transmissions are throw away s .
@@victoriabanaston9773 hmm Google isn’t working on this one. All I bring up is sweepers, seems like they would mash up the grapes. Haha I am not much of an Australian agriculture guy though. Sounds like I may need to fly down and investigate. And no I never said these are throw aways, I still don’t know what this machine even is. All I can picture is one of those big sweepers on an ice hockey ring but pushing around oranges and taters???
Likely, you’ve been asked this before, but I haven’t seen that answer yet. What makes both transmissions weak after it rains on a Cub Cadet RZT 50? Once it dries out it’s much better. Is that a belt issue or something else? Thanks for all your videos 😁
MIke, I have the same Cub Cadet shown in this video which I bought used several years ago. I love the machine except for one problem: I get jerky response part of the time, especially on rough ground (more pronounced when first moving from cold start). Any thoughts on this? Love your videos.
@@MowerMike Mike, The spring is in tact and appears normal, however I will check further and get back with you. If v-belts bottom out in their pulleys, I know that this can cause slippage as well and I intend to check that too. Thank you.
Hey Mike, I have a zt1 50 ultima cub cadet. Very low kms on it, but for some reason my right said won't engage. When I push forward it makes a almost grinding noise but not quite. Sounds like a hydraulic issue but I can't seem to figure it out for the life of me. Any recommendations?
At 2:37 you belt seems to be riding the bottom of your pulley. Belts are designed to ride on the sides of the grove not on the bottom. Not only is there less surface area for the pulley to grab the belt it is riding on a spot that will turn the at a different speed.
Does both hydro pumps should be the exact same on each side? I actually just bought a ferris from a private owner but I noticed one side is pulling faster than the other side. I did adjust it but the left side transmission is ZJ GMFE 3B5B 1PLX and the right side says KJ KMFE 3B5C 1PLX
Hey Mike, My wheel was working but it had problems only on the left side wheel and I purchased the upgrade charge pump cover and seals changed everything and now I cannot get the tire to move at all. I did notice on the gears in the charge pump has a dot stamped on them do these dots go up toward top of mower or downwards, I have read they can only go 1 way. Not sure what I have done wrong. Any thoughts on this Mike. Thanks a bunch
Hello. My hustler FASTRAK left drive started to get sketchy today... It feel like it's "sticking" at times.. And it doesnt want to glide back in forth easily like the other side. Any ideas??
My zero turn cub cadet has the hydrostatic transmission that does not have filters on it it moves just fine for about an hour and then the left side pretty much quits working I was wondering if there's a way to change and flush the fluid on the sealed ones without filters
I have a Cub Cadet M-60 Tank for sale... not turning well in one direction & stalls out, otherwise mows. I want to sell it as is. Anyone want it? I think there's about 1150 hours. Thanks!
Out of curiosity, do you have to drain the fluid before swapping the seals? I just changed the fluids then found the leak coming from the charge pump cap. Just trying to figure out if I need to have fluid ready to go to fill after changing them. Thanks for documenting the fix.
on my gravely I have replaced that seal twice over last couple yrs. recently it started leaking again so before I mowed today, I added some oil to the reservoir as I have been doing until I get a chance to fix it again, however today as I was mowing, I guess it leaked out lot worse and one side locked up. any advice as to where to start or you think it's done too much damage. Thanks
My hydro gears spin on their own and won't stop. I put the brakes on, but it keeps spinning and the pulley belts keep burning and ripping. Can you suggest any help?
Well that sure sounds dangerous. Check the linkage on top of the hydro that leads to the bars that you drive it with. Maybe it is binding and not letting that linkage push back and go into neutral. You can also put it on jacks remove the wheels and run it and play with that linkage by hand and see if you can get it to go into neutral. Good luck and be careful with that thing
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? [โกงไหมครับ ep.88 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
I expect this mower will last several seasons with decent care. th-cam.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
Maybe they should include a seal removal tool so the pump surfaces don't get gouged up from using a screwdriver to remove them.
I was sold on the subscription when you pointed out your mistake. That’s genuine and exactly the type of people I want to be watching and taking advice from.
I appreciate that. I am different than the other guys fixing mowers on TH-cam, I don’t do this professionally and thus make a lot of mistakes. But that is half the fun right, welcome aboard.
Mower Mike, I was having hydrostatic transmission problems with my Cub Cadet ProZ 500/560 until I watched your video. I followed a few of the tips you offered in the video. Thanks to you and less than an hour of my work, I was able to resolve the transmission problem WITHOUT having to pull the transmission. I'm from Texas and living in Virginia. Keep up the great work & posting brother!
That is great to hear. Thousands of people of watched that clip but no one has actually told me it helped them fix their issue till you. Time to get to mowin!
@@MowerMike Great channel, never had a problem with this just wondering what to look at next?
th-cam.com/video/zUju53xgiNs/w-d-xo.html
@@rpmzzz Should look ontop of that plate and see what is leaking not under it
Great video but watching you digging and poking with that screw driver instead of using the proper puller is nerve racking as you could damage the seat of the seal.
I agree I am a complete amateur at Hydro fixing haha
Auto transmission internal expanding snap ring pliers have serrated outsides for flat snap rings to expand outward. Just insert into plug bore and squeeze for a good grip on i.d. of plug bore and pull out. No screwdriver frustration or risk of damage to seal or bore. You're welcome!
Did u keep watching?
@@MowerMike I see that
I see you point. What a caveman.
Hi Mike,
Tori here. Thanks so much for the video! My Troy-Bilt Mustang RZT 50 trans’ (BOTH) feel weak and are whining. I’ll take a look at “him” (I named my Zero-turn “Steve”🥰) today to see if the trans’ are serviceable. If so, I am confident I can make Steve strong again thanks to your very clear and concise content.
I just subscribed to your channel because, well, Steve has a few things needing repaired. If I’m being honest, I have downright neglected poor Steve because working on zero-turn mowers was intimidating before finding your videos.
One last thing. I want you to know that your content is not only helping me, a single mother, save a TON of money, it is also being utilized to teach my two amazing young men (13&14) essential life skills! They may not have a man in their lives to teach them “manly” skills, but mama’s got their back! Thanks again for sharing your skills so I can pass them along my young men. You are a blessing!
Many blessings,
Tori
Me: *Walks out to check on Steve singing ‘INVISIBLE’!* 🤣😂🤣
Well, as you may have guessed, they are not serviceable. 😒 I need to order some parts and seals etc. from Amazon and crack them open one at a time to service them. I’ll be doing lots of research first though. Wish me luck. 🤣
Ah shucks you are making me tear up here. I appreciate the kind words. Good luck with Steve just take it one step at a time. I will keep churning out videos so I can teach those boys everything I know about wrenchin!
My dad didn’t teach me a thing about working on stuff, is all self learned. Whatever their passion is in life they will find a way to dive in and learn. Mine just always seemed to involve speed and gas motors lol.
One more thing, before you start tearing apart the transmissions make sure Steve has a good tight belt. It both trans are equally whining and weak I doubt that they need to be rebuilt. Usually it would just be one goes bad. My guess is the belt is loose or worn out since that belt runs both transmissions.
You just fixed my zero turn, my pulley was stuck and not getting my belt tight, now it’s like a brand new one. Thanks a lot Gravely zt1540
Nope you fixed it, congrats! I am about to drop a lot of Gravely videos, those are some great mowers. Stay tuned!
Great video! Saved me big time! Turns out it was an under tensioned belt! I was going to take it apart🤣
Easy fix, congrats
Dude! You saved me a ton of cash with this!
2 mower shops said it needed a new hydro gear.
Nice glad to help. Was it just the charge pump tube?
The pump/plate, total win thanks to your video.
That is a outstanding video I have never done it and it would been nice back in my younger times to work with motors I have an LT1000 Craftsman and it does not want to move now I can start looking thank you very much
Good luck
I run heavy-duty, hi-lift blades. Lift is created by the kickup on the back of the blade. The megmo blades don't have much of a kick up. I've run X blades but stopped because my machine is a high end residential mower and you need a commercial machine to run them.
No idea what you are referring to but great advice (I think)
Really great video and awesome explanation on how these hydrostatic axles work.
I am a small engine tech and have a business in Kaneohe Oahu. I'm working on a Z4200 Toro zero turn mower model 74360.
The right side transmission works great but the left side just barely turns.
The belt seems a bit loose but we didn't think that was the issue since the right side works great
We've made sure there is fluid and have did all the adjustments we can think of but it still wont turn any faster.
Is this transmission in this Toro the same as in your video ??
If not ,what else could cause this transmission to not operate properly. Thank you for the great video.
Wow I had to google that town, long way from Texas. Random Wikipedia fact did you know Kaneohe was home of the Hawaiian royals and they had 30 royal fish ponds! Wow what it must have been like to fish in a royal fish pond!
Well after all that I have to say I have no idea about you hydrogear. Everything I know about those transmissions is on that video. You can always just take it off and rebuild it. There are some other videos on that.
Good luck!
Mower Mike, Thank You for this video. I have a CC 54 ZT1. On the left side, the Brake Shaft keeps moving out. It as 2020 model. Any ideas
Nope never worked on a brake shaft. Good luck
I really appreciate your post, I’ve been having trouble with the steering on my Badboy for a while now, I was about to trade the ol boy in I’ve had it since 2011 BUT i watched your video with an easy fix (loose belt who would have known not me lol). Running like a new champ again. Thanks for sharing your knowledge and advice.
Hey that is great news, well done. Sometimes it is the smallest things!
Great video bro ❗️
Thanks for sharing !
I guess it’s time to upgrade some parts .
I wonder if upgrading to a bigger spindle on the engine side would make that transmission (pump) to spin faster, thus producing a higher pressure.
Good luck with your projects !
No telling, let me know what ya find out if you do it though. Sounds like a fun idea
This may be unrelated to the video, but I do have a 2009 Cub 48" ZForce. The problem I'm having is, the left lap bar seem to be lagging the right one. What I mean is, the left bar when pushed forward seems to be working against the right bar. It's as though it's acting as a brake from going straight, or esp, from going faster. If I use just the right, it goes fast and seem fine.
How can I adjust this left bar to make it track like the right one?
Got ya covered, check out this video. Let me know if it helps.
th-cam.com/video/Ycrw0oAfr04/w-d-xo.html
Mike - I have a 2006 husqvarna ez4217. My right side just went dead on me. Spins fine in forward and reverse on jack stands but no go under load. Has like a shuttering sound like it’s trying but it just won’t grab. Ever come across this, any ideas? I changed the fluid and it looked like coffee with a lot of creamer but I didn’t see and metal shavings anywhere. Im also able to turn the wheel even without the bypass lever engaged. Thanks
Hmmm not sure on that one. Good luck
Got the same problem with Cub Cadet ZT150. Pulled under shed after about four hours mowing all was well. Next day right axle wouldn't turn, took my truck and pulled to my shop after disengaging pumps, but right wheel is locked and dragging like a brake was on the right side. Any ideas would be GREATLY appreciated? Both sides have a few vines around axle, but left side functions fine with same or more debris around it. Going to lift up tomorrow and see if I can tell what's going on, have a bad leg so it's tough to get under it. Used to have small engine shop 40+ years ago, but not familiar with zero turn hydraulic drives. Thanks in advance to anyone for advice.
Hi Mike.
I have 2 mowers I have to work on. My 2014 Cub Cadet Z-Force L 48 has a weak left drive. I have not really looked hard at it, but I now it has a good oil supply. My other mower is a 1996 725 Grasshopper gas 3 cyl. Again the left drive is weak. It has 1510 hours on it. I recently purchased it from a man who let it set a long time. It has the drives that has the filters on it, and a supply tank for the oil.
Do you have any idea why the left drives seem to go out and the rights are still strong? I am used to larger transmissions, as I just rebuilt the Allison 6 speed in my box truck. I wanted to say thanks for the info as where to get the parts. That saves a lot of time.
Smiles!
Both trans are completely independent so there is no reason one would go bad over the other. It just means that either the belt is slipping on that one or it’s seals/internals are weak.
But before you do anything check the handle, there should be an adjustment screw on each side that will allow you to push that handle further forward than the other. Showing that screw is a good idea for a video now that I think of it.
Hey Mr. Mike....hey what causes a hydro to work great at first then after some use it starts getting noisy and eventually doesn't want to pull...it sorta jumps in a way
My only suggestion is to make sure it is full of fluid and bleed properly
You think I should change the pump parts n seal like you done
Thank you for your video!! Saved me 2000 dollars
Wow very cool. You fixed it though not me.
Anyone know where i can find info on Z4219 husqvarna hydra gear info
Thanks man!! I had no idea what I was doing so this helped majorly.. Love my Cub Cadet.
Glad it helped
Just replaced my zt2200 non-serviceable hydrogear
I’m getting a whining noise.( What causes this)
New belt installed and was told the new pump comes preloaded with oil
Ive seen notes that refer to a friction pack nut to loosen 1-2 turns …. Can you help I don’t wanna spend another 850 for a new pump
I suggest making sure it is topped off with oil. Remove the plug on the top of the case with a 3/8 in extension. They will whine when they are low on oil or have not been bleed right.
What would cause the fwd/rev lever to have slack in it between fwd and rev function?.. everything is tight on the linkages, except something "internally"... Specifically, moving drive lever towards reverse, it moves about 2" more than the other side, with a slight "detent" feeling before engaging reverse, a bit rougher than it should..
The right side is as smooth as a perfectly operating hydrostat drive should be, but the left side has developed a problem...
There is a dampener arm that goes from the arm to the top of the transmission. My guess is that it is wore out, they are super easy to replace. Good luck!
Get a set of picks from Harbor Freight. There are several in different configurations for $ 1.99. They are awesome for removing O rings and such. You might want to sharpen them a bit if the points are a bit dull.
Great idea. I have a set of craftsman picks now and use them all the time
Mike, will the parts you listed (hydro gear 72274/72994) work on a 2006 zforce48fab with Hydro-Gear IZT transmission?
I have no idea. The hydrogear website is really good I would ask them.
How about the non serviceable transmissions? Do you have any tricks for those? Cubcadet is requesting me to change the whole left transmission and I just can’t pay for it right now! Help please
I have all sorts of videos on that. Check out my playlist. You will have to remove it to flip it and drain it. It is a PIA I would leave it alone.
th-cam.com/play/PLo4VDcnI4eoh-1nKTw_e3J5UkKEDlKSnk.html&si=ctpCzqahO9RAwEVt
Hey Mike thanks for getting back with me. Hat off to you brother for these very informative videos you make for all of us. I just did mine ordered the fluid it took about an 45 minutes or so to finally get it running smoothly again! I couldn’t have done it without your guidance!!
That is great news. Well done on tackling a transmission and not being scared of it. Merry Christmas!
Good video. I did change out the o-ring on both of my ZT-2800s since they leaked. Of course, also changed out the oil and filter on both after making sure I could remove the air bleed screws. Yet, even after going through the purge cycle 6 times, my left hydro no longer works. The disengage seems to be working correctly I verified that I put the pump cover on in the right configuration. I am at a complete loss now as to why I cannot get it to work at all any more.
Try unhooking the fill tube and use a funnel to fill it directly to help purge it.
@@MowerMike - Appreciate the reply. Turned the pump cover 180 degrees. I cannot for the life of me figure out how I got it turned. Even a service manual shows the cover was on right. Oh, well. Live and learn.
How do you replace a "hydraulic dampener" no a Hustler Dash? They told me that is wrong what's with mine and I don't even know where to find it. Is it a DIY repair? (my left control arm is not hitting the safety switch)
If you look at the bottom of the forward/backward control arm there is a rod connected to it that connects that arm to the top of the transmission. It should have a clip in each end that pops off, is super easy to replace.
I'm here to very carefully explain that this is extremely valuable to me as a landscaping business owner who functions as his own mechanic.
Thank you for these in depth, high quality videos.
Very cool, glad it helped out. I am just winging it here
I know this is an old video but hopefully you read this and can help me out.
I dont see any leaks. Does that mean my seals are good or should I still open it up and replace them? Spring is tight, drive belt is tight, no leaks that I can see. Only one side works and the other doesn’t.
Not sure what you are asking here. If it isn’t leaking then the seals are not leaking.
The video said you over tightened and stripped bolt holes. Did you just retap the threads to fix? Mine is still leaking because I think I did the same thing and wondered how to fix it.
You can try tapping it with the stock thread size or just going a touch bigger. I have a video on tapping threads
My zero turn cub cadet won't move forward or backwards I think a spring came off too how do I fix this please?
Put the spring back on
Instead of a screwdriver, insert a bolt with a nut on the end to pull out the pump seals. It looks like an O-ring pick would work as well.
Excellent idea, will try that next time for sure.
If only the left side was not moving right would that be due to lack of tension on the belt or would that be a different issue?
Depends if there are two belts
Hey Mike. I have a used exmark radius x.
Ever since I've owned it, the steering levers have been super flimsy. I struggle to go in straight lines at higher speeds. It feels like there's little no to resistance on the levers. I also notice that my hydro fluid is below the full line.
I've tried replacing the dampers and it didn't change anything.
Do you think I would just have to replace the hydro fluid ? Or is there something else at play here ?
I would start by filling up the fluid. Then adjust the hydro speeds. I have a video on it
@@MowerMike okay awesome I'll look at your video after filling it
Great video, but I'm surprised you didn't mention to check for sloppy arm linkage where that Allen bolt gets lose. That is my problem with the same mower in your video and I'm searching now how to fix it.
Hmm not familiar with that one. Maybe it is a worn out ball joint
could you elaborate
@@tennesseejed884 Where the black control bars join up with the gold pieces that go to the transmission linkage, there is a poorly designed joint with an allen bolt. When this bolt gets lose, you lose some of your forward and backward control. I fixed the right side on mine and it's like new now. The left side is harder to get to since you have to take some panels off, and I haven't fixed it yet. Always check this first. So happy I don't have transmission problems like I first thought.
I ordered some replacement oil for my zero-turn transmissions. I got some high zinc motor oil of the correct viscosity. But I noticed it is "NOT" synthetic that won't make a difference will it?
Nah you will be fine.
You forgot to mention that the replacement cover has a certain way it has to be turned or the transmission won't work at all.
True but you did so thanks!
Those little seals are called triple o ring seals. On my 14 year old ZT3100 Hydro's the right side was making screaming noises as those triple o ring seals had dried up shrank and hardened over the years. The dealer told the previous owner they needed to change out the whole hydro for big bucks. The owner balked at that and sold it to me as a project for a very fair price. Mine was so old that those little seals were actually just double o ring seals. They had shrank as were loose in the bores (Hence the screaming noise of high pressure oil bypassing them) making it pretty easy to wriggle and then pull out. I lubed up two new seals and pressed them in. Installed the upgraded cover and gear and o ring kit to replace the bottom cover. Did a thorough burping procedure and all set! It did take a few hours of use to then fully burp the system and stabilize oil level in the tank. But it's been running like a dream now all Summer for me! Thank you for this great info!
Man that is so cool. I have a very old Gravely I am going to do the same thing on to bring her back to life.
I have a Dixon speedster 42" old er mower. last fall one side stopped turning. we tried adjusting a few screws and its still stuck not moving. then I got underneath it and saw it is leaking from the hydrostatic gear box...please forgive me if I dont know the correct names of thing, btw. I am just an old lady trying to keep from having to replace it til I can afford to (I have a 7 grand vet bill I am paying off right now) I called the place where we bought it and they dont even sell them anymore. They tried to sell me something new. they said the hydrostatic system is closed and has to be completely replaced if it is leaking and its thousands to replace. so I happened to see a video the other day by Scotty Kilmer talking about amp-205 and it stops leaks and can be used in a hydraulic fluid. Is there a way to add this fluid to the hydrostatic steering system ?
I have no idea, those old Dixons are hard to work on. I have to agree with your mechanic she maybe dead.
I have a Dixon speedster 42" old mower. last fall one side stopped turning. we tried adjusting a few screws and its still stuck not moving. then I got underneath it and saw it is leaking from the hydrostatic gear box...please forgive me if I dont know the correct names of thing, btw. I am just an old lady trying to keep from having to replace it til I can afford to (I have a 7 grand vet bill I am paying off right now) I called the place where we bought it and they dont even sell them anymore. They tried to sell me something new. they said the hydrostatic system is closed and has to be completely replaced if it is leaking and its thousands to replace. so I happened to see a video the other day by Scotty Kilmer talking about amp-205 and it stops leaks and can be used in a hydraulic fluid. Is there a way to add this fluid to the hydrostatic steering system ?
Time for a new mower
Haven’t found too much to help me out maybe you could point me in the right direction…mine isn’t leaking nor have I really noticed any sort of power loss or slippage. Mine are simply making a loud whining/grinding noise for a few minutes then it’ll stop then it randomly does it again. I haven’t noticed anything loose underneath whatsoever.
I would make sure it is topped off with fluid. They get that way when they get low or have a little air in the system.
Good video! Do you know if the Hydro-gear 2200 series can be serviced? I am thinking abut purchasing a Cub Cadet ZT1 50 which comes with hydro-gear 2200. Thanks.
Check out my zero turn transmission playlist. Have all the videos you could ever want on that
5-7-23, 2000 hours, upgraded both charge pimps, when purging air on right transaxle I was reengage the bypass arm and heard a small pop noise. Ever since right side starts to pull than stops. Any thoughts would be helpful. Thanks in advance Jim
Wow that is alottt of hours. The pop is probably coming from the linkage somewhere between the handle and the throttle. I would take the wheel off and move the handle back and forth and see if you can find where it is popping.
As far as stopping you may not have it bleed all the way, I would keep working on the bleeding procedure. Good luck
So I opened up my hydro gear 3100 on a 2011 z force S. Took the pump off, it was def leaking. But I was surprised when I didn’t find any pump seals to remove. Do some not have them?
Inside those there are not seals in the guts of it. There are some other videos online about rebuilding the unit. Good luck
Hi Mike, I bought a used cub cadet zero turn zt1. I've been noticing that it sometimes whines and struggles to reverse to the right. Any idea what to check?? Thanks a lot for all the advice...
All I know about hydros is in that video. Good luck
Mine too! Let me know if ya figure it out!
Mine too same problem, love to hear anything you find out
anyone out there have any advice for a 3 year old ZT1 50 that is leaking transmission oil from one side? I would assume it's a seal, but trying to find info on how I can do it myself but not having any luck...
First step is to see if it is leaking from the axle seal (seal around the shaft) or the actual seal between the two main halfs of the transmission. Both or fixable just find out where it is leaking and do some research
I'm using a Hustler Raptor SD. After about an hour of continuous running, the right side starts to make a grinding noise and loses function. After sitting and cooling off for a while, the symptoms aren't present. Any ideas? Could it be the part in this video?
Everything I know about these things is in that video. Good luck
On my comment that I had posted I was having an issue with a zero turn z4200 toro and what do you think the problem was ???? The belt was slipping on the left side pulley. We put an additional spring to tighten the belt and that Silver the problem ,but we went ahead and installed a new belt with a heavier spring and the mower runs and turn great.
Very cool, that is a relief when it can just be fixed by belt tension and not pulling the whole thing apart. Well done
My dad has an early 2000s tank with Kawasaki 23 hp engine and it is leaking between the motor and pump on the left side. The hydraulic oil is just 20w50 engine oil. Have you ever worked on one of them?
It is similar to this one. If it is leaking along the main seal on the hydro you will probably have to take it off and take the cover apart and re silicon it.
Wow, exactly what I need to do! Thank you.
I have a problem. My 12 YO Exmark Phazer model PHZ19KA443 s/n 641119 has Exmark part number 109-2240 for the trans-axle. It looks like the one in this video but maybe different. To get parts I need to know the Hydrogear model this trans-axle is. Is there a cross reference to get this info? The parts manual does not give part numbers for the components of the trans-axle so I am dead in the water. Any help greatly appreciated. parts for a trans-axle this old are not easy to find. Thanks, Doug
No idea I would go to your local mower shop and ask them
im wondering if this is a fix to my issue. When im cutting thicker grass it boggs down going forward but not in reverse. Same thing when I dont have the pto engaged and Im going uphill. I have a m48 tank from 03'.
Well I assume by M48 tank you are running a Cub Cadet zero turn, or is it the M48 main battle tank we used in Vietnam??
en.m.wikipedia.org/wiki/M48_Patton
So if you are running the Cub you may just have a belt that is slipping under load. Check out this video and check your tension and spring.
th-cam.com/video/S9JZtya3qsM/w-d-xo.html
Any advice on when they get jumpy? For example, when I am turning, it starts turning ok, then the tire will sometimes just stop...making it jerk. Thoughts? Thanks!
No idea good luck
My turo mx5060 cuts for about an hour then my left hand drive motor gets really weak and makes a whining noise. Any suggestions on fixing this problem.
Stop cutting your yard after an hour??? Haha I have no idea good luck
Having problems with mine rightnow.. when i stopp and make a sharp turn my transmission slips and when i go straight, it doesnt catch back until about 2-3 seconds of going straight. Going to try these
Sounds like the belt maybe slipping, good luck
Damn right I’m winning at life.
Born a leader.. lol
Thanks for the information !
Mike… what an awesome name. Wish I had a cool name like mike.
Mine is Ray Ray or back in The day Rockin razor
You got it Rockin Razor! Yep only a few of us lucky soles can be called Mike. Ray is a killer name though also.
I have E355z JD. Can't find a video for this one on the hydrostatic
Never worked on that big boy but it should be similar. I have a drive belt change video on a Deere zero turn, check that out to get the belt out of the way and then you can drain the hydro based on my hydro oil change videos
I have a JD455 the right side control lever has a lot of resistance with engine not running,the left side lever moves freely,belt squeals on hard turns under load.machine does not have equal power left and right lever.Any ideas where to start ?
First I suggest check that it is full of hydro fluid. Then you can adjust the speed to match each side. If you already watched my videos and tried that I am out of knowledge for ya on hydro transmissions. Good luck, check out the video below on adjusting speed.
th-cam.com/video/Ycrw0oAfr04/w-d-xo.html
Do you have a video on fixing/adjusting reverse? My forward speed is great, reverse not so much. Slow, sluggish and will not go up slight grade anymore.
Check out my zeroturn playlist. I have one on adjusting the throttle.
My brand new mower deck rattles like its 40 years old. Call dealer or will they just say "take the rocks out of my head"?
If I bought a new mower I would sure ask the dealer if it is bothering me.
My simplicity Courier has a leaking 1759444YP hydraulic drive. Is there some way to know if this is the same as a Hydro Gear ZD-AUBB-2A7B-3XPX ? Also, How do you replace the lost fluid ? Thanks. Great Vid !!
No idea but check out my videos on changing the hydro gear oil and you will see how to fill them.
th-cam.com/play/PLo4VDcnI4eog75ESAm7eClMTZ50vTwQEu.html
Mower mike mike! what's up man! .. Hey that's the Tank! I have the grandfather of those (Lesco commercial plus or "m54" ztwo). You wouldn't happen to know the belt numbers for the 54 would you? or a place to find these belts without me having to take the beslts off, run miles up the road, play match maker and return back lol
Man I have no idea. With something that old I would just take them off and play match maker.
Can anyone help me I've changed the hydraulic fluid on cub cadet that has filter and fluid 7 qts till dip stick is showing and won't move now
Just keep working the air bubbles out. Check out my hydro oil change video on how to bleed it.
I just redid both sides and one side doesn't want to prime. The charge ports seemed to seat all the way (same amount on both gears). Any ideas?
Just keep trying, it can be finicky getting all the air out. You can try a very small funnel to make sure it isn’t blocking anything to top it off.
Thank you for the reply. I ended up figuring it out. I had to rotate the charge pump cover. It was facing the wrong way🤦♂️
My blades stop turning when I run into the grass . I ordered a new pto switch I’m not sure what’s going on . Can you help ??? Blades free of snags . The blades rotate but no strength now
I bet your belt is slipping check the tension sprint
Mower Mike I have a question. I have a k66 tuff torque in a xt2 gx54 what can I use for hydrostatic? Oil substitute
I think just a 10w40 or 50 car oil will work. What ever weight I used in the video. Good luck
My left hand pump won't move forward or back. Do you think in your experience that one of the tricks you've shown here will address that?
No idea
Mower Mike, My Cub Cadet RTZ 50 has no filter or method of draining.. If I pull the bottom cover to replace the seals how can I replae the oil?
Thank you for the video. It will be a great help.
Check out my channel have 3 videos on removing and draining a hydro with no filter.
Hey Mike I have a 2004 Mustang RZT Troy-Bilt zero turn and sometimes when I pull the metal parking brake back into drive the right side doesn't turn at all frontwards or backwards only the left side works and it goes and circles what should I do
Sounds like you need to check your brake linkages
What do you think - Should I send this part back- Hydro-Gear 71530 Kit Center --> th-cam.com/video/9tUgEAszVNc/w-d-xo.html
I would just hit it with scotch brite pad to smooth it and strap it on.
Hi Mike have a huskarvana sweeper with hydrostatic transmission drive . Fitted new belt but doesn't seem to want to drive . Another thing that we noticed you couldn't push it without disengaging on off lever but now we can any suggestions.
Hi Victoria, let me first ask what is a Huskarvarna Sweeper? Is this like a parking lot sweeper
@@MowerMike it is a ride on sweeper used for big packing sheds in Australia gearbox is upside down on this. Peerless hydrostatic transmission
@@victoriabanaston9773 Interesting, To disengage a hydro trans there is usually a separate lever to put it in neutral. You may check it there is an adjustment on the actual drive handle to see if you can get it to push further forward. On a mower there is a screw you can shorten to let you push the handle further. Sorry I am probably not much help, I don’t even know what an Australia packing shed is lol.
@@MowerMike your funny Mike same as your videos . It's where you pack oranges potatoes grapes and all other fruit and vegetables in boxes . If you Google k1250d karcher sweeper you will understand more. But as you have stated most of these transmissions are throw away s .
@@victoriabanaston9773 hmm Google isn’t working on this one. All I bring up is sweepers, seems like they would mash up the grapes. Haha I am not much of an Australian agriculture guy though. Sounds like I may need to fly down and investigate.
And no I never said these are throw aways, I still don’t know what this machine even is. All I can picture is one of those big sweepers on an ice hockey ring but pushing around oranges and taters???
You missed the most important piece of information....the charge pump plates MUST go back on in the same orientation they came off.
Good point I am a total amateur
Likely, you’ve been asked this before, but I haven’t seen that answer yet.
What makes both transmissions weak after it rains on a Cub Cadet RZT 50? Once it dries out it’s much better. Is that a belt issue or something else?
Thanks for all your videos 😁
My guess is a slippery belt.
Any ideas on how fix the hydro by pass the brass lever seem like it stuck in neutral is there way to adjust it without taking the hydro apart?
I would just try whacking it. Get something long and see if you can move it. Good luck
MIke, I have the same Cub Cadet shown in this video which I bought used several years ago. I love the machine except for one problem: I get jerky response part of the time, especially on rough ground (more pronounced when first moving from cold start). Any thoughts on this? Love your videos.
Sounds like that drive belt is slipping. Check the tension on the spring that hooks to the pulley to make sure that belt is tight
@@MowerMike Mike, The spring is in tact and appears normal, however I will check further and get back with you. If v-belts bottom out in their pulleys, I know that this can cause slippage as well and I intend to check that too. Thank you.
@@k4ebyk4eby6 na it's the damper shocks on the levers. Replace both not just one.
@@JM-yx1lm I didn't know they existed, but sounds probable and I'll certainly check it out. Many thanks.
Thanks, J M. I replaced the damper shocks today and that fixed the problem- spot on!
I change the seals because they was leaking and now I can’t get the hydro to get the wheel moving it did before I changed the seal
Have to make sure to bleed it. Check out my hydro fluid change videos on how to bleed it
@@MowerMike I did watch I also changed the oil and filters I’m not really getting the bleeding parts
Hey Mike, I have a zt1 50 ultima cub cadet. Very low kms on it, but for some reason my right said won't engage. When I push forward it makes a almost grinding noise but not quite. Sounds like a hydraulic issue but I can't seem to figure it out for the life of me. Any recommendations?
Sure doesn’t sound good. I suggest making sure she has plenty of fluid in it, when they get low they start making noise
At 2:37 you belt seems to be riding the bottom of your pulley. Belts are designed to ride on the sides of the grove not on the bottom. Not only is there less surface area for the pulley to grab the belt it is riding on a spot that will turn the at a different speed.
As long as she gets a ride!
Seems like a basic pick set woukd work better at removing seals rather than jamming screw drivers in there….😂
Haha totally agree
Does both hydro pumps should be the exact same on each side? I actually just bought a ferris from a private owner but I noticed one side is pulling faster than the other side. I did adjust it but the left side transmission is ZJ GMFE 3B5B 1PLX and the right side says KJ KMFE 3B5C 1PLX
Got me, all I know is to adjust the adjuster screw
Hey Mike, My wheel was working but it had problems only on the left side wheel and I purchased the upgrade charge pump cover and seals changed everything and now I cannot get the tire to move at all. I did notice on the gears in the charge pump has a dot stamped on them do these dots go up toward top of mower or downwards, I have read they can only go 1 way. Not sure what I have done wrong. Any thoughts on this Mike. Thanks a bunch
Not sure on the dot but keep trying to bleed the system to get the air out. If all the air isn’t out it doesn’t work.
Hello. My hustler FASTRAK left drive started to get sketchy today... It feel like it's "sticking" at times.. And it doesnt want to glide back in forth easily like the other side. Any ideas??
Check that is is full of oil and the belt is tight first. Good luck
My zero turn cub cadet has the hydrostatic transmission that does not have filters on it it moves just fine for about an hour and then the left side pretty much quits working I was wondering if there's a way to change and flush the fluid on the sealed ones without filters
Stay tuned am working on that video right now.
Well there not only on the zero turns it’s also on there regular riding lawnmowers as well like my old 1500 serious 1550 LX super Cub cadet
Yep they are all run by Hydros!
Will these parts you mentioned fit my Hydro gear transmission? It’s a cub cadet Z-force 48 inch
As long as it is a hydro gear it probably will
I watched the pump install several times and I still don't see the extra gear you were talking about.
It was just a little one in the middle. Just don’t put more gears in than you take out and you will be fine :)
Anyone who listens to music through a Klipsch has got to know what he's talking about. Oh yeah.
Fk yeah! Fantastic speakers I even have the powered 16in base, can rock my entire street.
hey I have a 2012 John Deere z225 mower any won't go forward or backwards is it easy to fix
I have no idea. I do suggest you start with making sure your belt is working.
I have a Cub Cadet M-60 Tank for sale... not turning well in one direction & stalls out, otherwise mows. I want to sell it as is. Anyone want it? I think there's about 1150 hours. Thanks!
This is not a mower sale site, put it on Facebook Marketplace
Got pictures??
May be interested
Transfer tubes can be easily removed using an easy out of the correct size. Mush less trouble than prying with a screwdriver.
I like it good idea!
Out of curiosity, do you have to drain the fluid before swapping the seals? I just changed the fluids then found the leak coming from the charge pump cap. Just trying to figure out if I need to have fluid ready to go to fill after changing them. Thanks for documenting the fix.
All the fluid will come out when you swap those seals so may as well be ready
@@MowerMike I figured so based on the hydraulic diagram, but didn't see it draining out when you pulled it so wasn't sure. Appreciate the response.
on my gravely I have replaced that seal twice over last couple yrs. recently it started leaking again so before I mowed today, I added some oil to the reservoir as I have been doing until I get a chance to fix it again, however today as I was mowing, I guess it leaked out lot worse and one side locked up. any advice as to where to start or you think it's done too much damage. Thanks
I would fill it up with fluid and see if it will unlock and just try to run it
@MowerMike yeah tried that
So silly question if you spin them transmissions faster will the mower move faster or are they governed
No idea, give it a shot and let me know
Couldn't find the link to Amazon to get the new replacement parts upgraded parts
Click down in the video description, they are all there. Good luck
Very Good!... #275 ✝ {5-27-2023}
Thanks
What about a tap and tighten it a tad to pull old ones out??? Try it you’ll like it 😊
Good idear
My hydro gears spin on their own and won't stop. I put the brakes on, but it keeps spinning and the pulley belts keep burning and ripping. Can you suggest any help?
Well that sure sounds dangerous. Check the linkage on top of the hydro that leads to the bars that you drive it with. Maybe it is binding and not letting that linkage push back and go into neutral. You can also put it on jacks remove the wheels and run it and play with that linkage by hand and see if you can get it to go into neutral. Good luck and be careful with that thing
How do you fill the trans when you have two
Check out my hydro playlist where I change the hydro oil.