You can download the AHP Excel Sheet from this link: drive.google.com/drive/folders/16IbQlidU0Ahmn2o2atxD2QmEm0sKRWgR?usp=sharing Thank you and best of luck. 😇
My one msc student did on this topic using ahp recently . Very useful tool and technique . another student did both zoning and water balance model. Both paper are in pipeline in sci journal .🤗
Please make one video on validation of integrated groundwater potential zones map? And explain the methodology how to validate the potential zone. And give the information about data required for validation.
How can I enter more than 10 parameters? This spreadsheet is restricted to 10 factors only to be entered and not editable, can I have an edited version for criteria between 10 - 20. Thanks
i have two questions, 1. if DEM have 30 m resolution and soil map or land cove have 90 m resolution, is there any effect? question 2. for area calculation 89*89/10^6 while your DEM have 90m resolution?
This is a helpful video sir... please next video uploaded in the AHP method of Analysis of Groundwater paramiter data in Excel sheets.... thanks so much sir
🎯 Key Takeaways for quick navigation: 00:16 *🌍 Introduction to performing weighted overlay pairwise comparison matrix using Excel in groundwater potential zone identification* - Introduction to parameters controlling groundwater, - Explanation of pairwise comparison matrix using a scale of parameters' significance, - Demonstration of adding factors in the weighted overlay method. 02:23 *📊 Creating pairwise comparison matrix for factors influencing groundwater potential zones* - Explanation on comparing the importance of different factors, - Demonstration of assigning scale values to factors based on importance, - Importance of maintaining consistency in the pairwise comparison matrix. 11:53 *📈 Calculation and interpretation of weights for factors influencing groundwater potential zones* - How weights for criteria are automatically calculated, - Importance of rainfall and geology in groundwater potential zones, - Demonstrating how to generate the weights table from an Excel sheet. 16:09 *💧 Ranking factors such as land use, lineament density, drainage density, soil type, and slope for groundwater potentiality* - Factors affecting groundwater potentiality assigned ranks based on characteristics, - Explanation on how different factors contribute to groundwater potentiality, - Demonstrating the importance of assigning appropriate ranks to factors. Made with HARPA AI
after assigning respective weights to different classes of the layers. the output raster generated is empty with no classes. its values ranges from zero to zero. HELP!!!
Is it helpful for Bs environmental science and 3rd year student? Is it beneficial for my final year research project? If i learn and do practice from this video? Please let me know
Wonderful analysis, this is great work done. One question, can you take the final output to the field to actually dig for wells or there is an accuracy test you need to do?
For every layera you should keep the extent same..just go to properties and extend the 'extent' option and see the cell size...see.if it is same for all the layers.
Please watch the part 1 of this tutorial. You will understand how to prepare individual parameters. And for rest of the data, I recommend you to find essential tutorials on my channel. You will get many important data downloading way from my channel. Thank you. Best of luck.
You have to collect these data from relevant govt or non govt organizations of your country.Also you can get the dugwells location through field survey and local government authority.
You can download the AHP Excel Sheet from this link: drive.google.com/drive/folders/16IbQlidU0Ahmn2o2atxD2QmEm0sKRWgR?usp=sharing
Thank you and best of luck. 😇
Hello sir I need one help to do my research please share your mail I’d I will send my requirements
Assalamu alaikom sir, i can't download the link you shared.
Kindly include the Microsoft word you are referring too. Shukran big brother
it made little confusion to me. please would you make short video on how to download AHP Excel Sheet?!
Hi. Thank you for the videos. Very helpful. Can you share the word file too?
My one msc student did on this topic using ahp recently . Very useful tool and technique . another student did both zoning and water balance model. Both paper are in pipeline in sci journal .🤗
That's cool. Best of luck. 👌
can u send a link?
@@jeraldjohn4170 dear sir it is not published ready to submit soon.
Requesting a video on urban sprawl measurement using GIS. Wonderful presentation Sir. Thank You.
Good job brother and God Bless you for sharing such a good knowledge.
I am grateful to you. Superbly done. I learned a lot. Best wishes .
Thank you for your nice words. Please keep in touch.
Please make one video on validation of integrated groundwater potential zones map? And explain the methodology how to validate the potential zone. And give the information about data required for validation.
Wonderful hands on presentation sir.... Thank you so much sir
You are welcome. Thanks for your kind words. 😇
How can I enter more than 10 parameters? This spreadsheet is restricted to 10 factors only to be entered and not editable, can I have an edited version for criteria between 10 - 20. Thanks
i have two questions, 1. if DEM have 30 m resolution and soil map or land cove have 90 m resolution, is there any effect? question 2. for area calculation 89*89/10^6 while your DEM have 90m resolution?
This is a helpful video sir... please next video uploaded in the AHP method of Analysis of Groundwater paramiter data in Excel sheets.... thanks so much sir
🎯 Key Takeaways for quick navigation:
00:16 *🌍 Introduction to performing weighted overlay pairwise comparison matrix using Excel in groundwater potential zone identification*
- Introduction to parameters controlling groundwater,
- Explanation of pairwise comparison matrix using a scale of parameters' significance,
- Demonstration of adding factors in the weighted overlay method.
02:23 *📊 Creating pairwise comparison matrix for factors influencing groundwater potential zones*
- Explanation on comparing the importance of different factors,
- Demonstration of assigning scale values to factors based on importance,
- Importance of maintaining consistency in the pairwise comparison matrix.
11:53 *📈 Calculation and interpretation of weights for factors influencing groundwater potential zones*
- How weights for criteria are automatically calculated,
- Importance of rainfall and geology in groundwater potential zones,
- Demonstrating how to generate the weights table from an Excel sheet.
16:09 *💧 Ranking factors such as land use, lineament density, drainage density, soil type, and slope for groundwater potentiality*
- Factors affecting groundwater potentiality assigned ranks based on characteristics,
- Explanation on how different factors contribute to groundwater potentiality,
- Demonstrating the importance of assigning appropriate ranks to factors.
Made with HARPA AI
shape file does not accept by the add weighted overlay layer, how to solve this problem
Thank you so much for the AHP Excel sheet. Please kindly guide me on how to expand the question section because my number of criteria is 10.
I did not get you. Could you please explain? Thanks.
thanks you so much , so useful please share with us more interesting tutorials like this , good luck
Thank you for your nice words.
Very informative video. Thank you for your work.
Thank you for sharing, nice illustration.
very good Dr and thank you. you can shown and explained how to publisher an article in any journal of science?
Hello... nice work. How did you get the Excel calculation sheet for calculating the pairwise comparison?
Hi, great video thanks! can you make videos about sensitivity analysis and validation?
i need sensitivity analysis and validation?
For AHP Excel sheet, Please write your email ID here. I will send you soon. Thank you.
I did not receive email…
@@nari545 I Couldn't find your email Id. Please put here.
Hello sir , can you make video on AUC-ROC validation curve of groundwater potential map ?
Yes . Plz do on validation. Thank you so much
I got an error during overlay of all maps during AHP.could you please tell me solution
in wetght overlay it take only raster file but in video you show soil , geology file are also given in overlay. can you conclude that
I had the same doubt , I tried by converting it to raster types and it worked. But don’t know whether it’s correct
wonderful sir, thanks alot
after assigning respective weights to different classes of the layers. the output raster generated is empty with no classes. its values ranges from zero to zero. HELP!!!
Very Informative..
Thanku..
Welcome
great video!! can u show how to calculate weight using multi-influencing factors (MIF) method??
Sirji .... please next video uploaded the Excel table data analysisof groundwater modelling
How to calculate MEA, MSE, RMSE for this? Please make a video. Thanks !
Is it helpful for Bs environmental science and 3rd year student? Is it beneficial for my final year research project? If i learn and do practice from this video? Please let me know
Pls make video on urban sprawl to using possibly 30 years difference. 1990 - 2000 - 2010- 2020
Pls make video on urban sprawl using possibly 30 years difference. 1990 - 2000 - 2010- 2020
pls can I get PDF file for reference?
Wonderful analysis, this is great work done. One question, can you take the final output to the field to actually dig for wells or there is an accuracy test you need to do?
Yeah, you can do that also.
This is very good work. Can you provide the word document?
Please provide link for drainage density map preparation
Nice brother!
Excelente trabajo
How to add more than 10 parameters in Excel sheet or Pls provide excel sheet more than 20 parameters for matrix , AHP
How can I activate the excel base file?
Thank you
How to add more than 10 parameters in Excel sheet or Pls provide excel sheet more than 30 parameters for AHP
Thank You...!
Sir please send me excel sheet ....because excel calculation not get it
Such an amazing work my Friend! Would you allow me to replicate your model with some of my students in Brazil?
BTW...is the word file also shared? How is the best way to give you credits?
What is the password to modify excel values?
Invalid Output Extent error is showing after running weighted overlay, output raster is showing empty... how to solve the error ?? please help.
For every layera you should keep the extent same..just go to properties and extend the 'extent' option and see the cell size...see.if it is same for all the layers.
Kindly explain how to validate the map
How to do Sensitivity Analysis for validation.
the output generated raster has values 2, 3 and 4 ...what does it mean? why not its 1, 2 and 3?
Hi, i have the same problem. Mine generated 2, 3, 4, and 5 without 1. Do you have the resolution for it?
How to make individual parameter maps and where can one get the data to make those maps for different countries?? Thank you
Please watch the part 1 of this tutorial. You will understand how to prepare individual parameters.
And for rest of the data, I recommend you to find essential tutorials on my channel. You will get many important data downloading way from my channel. Thank you. Best of luck.
@@GISRSSolution Thank you Sir... God bless
Greetings my friend
How to draw topography and geomorphological units possible help
Thank you for the explanation, could you please share the sheet?
Please write your email id here. I'll send you soon. Thank you.
Can you share all your reference i.e excel, microsoft word and pdf. Thank you
Can you please share the excel sheet please
Polygon vector layer and shapefile of study area are same thing ??
Yes, same thing.
Can you share the excel sheet?
Where can I find Groundwater depth data for validation?
You have to collect these data from relevant govt or non govt organizations of your country.Also you can get the dugwells location through field survey and local government authority.
very good😍
How to download data for validation
Sir please share the excel file link
Do you share the excel sheet sir?
Please write your email ID here. I will send you soon. Thank you.
can you send the excel sheet?
Please write your email id here. I'll send you soon. Thank you.
Your Consistency Ratio(CR) was 0.37 and it was not less than 0.1 so the CR is wrong, Now what we have to do if it wasn't fulfilling the condition.
Can you please share the excel pls?
Please write your email id here. I'll send you soon. Thank you.
Can you please share the excel Sheet?
Please write your email ID here for the AHP Excel Sheet. I'll send you soon. Thank you.
Intersting
Thank you.
please email me the excel sheet
Hallo sir
Can you share the excel sheet?
Write your email id here please