Lawn mowers to avoid!

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 1.7K

  • @Mechanical_Mind
    @Mechanical_Mind  8 หลายเดือนก่อน +8

    To find tools, shop equipment, mower parts and more, you can find them at my store. Click this link: www.amazon.com/shop/mechanicalmind
    I'll get a commission on the sale at no extra cost to you. It's a great way to help the channel and get the items you need.

    • @trx420fm1
      @trx420fm1 5 หลายเดือนก่อน

      Since you were so honest with this one could you do a follow up because john deer has updated the mowers for 23/24 with thicker more robust frames bearings installed in the caster wheels and the foot lift deck and better 21" seat and the FR691V Kawasaki engine and the available 10guage deck. They seem to be much improved now what is your opinion on them now? model number I'm referring to is the z330r/z330m seem to be much improved

  • @dnprgp0n331
    @dnprgp0n331 11 หลายเดือนก่อน +22

    You are absolutely correct and spot on! I had a John Deere Z540M zero. 176 hours and both hydrostatic transmissions have gone out. $1200 a piece and John Deere doesn’t stand behind. After the second one I got rid of it and will never buy another. Listen to this guy and stay away!

    • @aaronfrodo9177
      @aaronfrodo9177 9 หลายเดือนก่อน +1

      I use a Hustler dash 34 inch and its the perfect size. Its great for both big and small yards.

    • @lozgod
      @lozgod 4 หลายเดือนก่อน +1

      They have a 4yr/500 warranty. Why wouldn’t JD fix it?

    • @davidrodgers7224
      @davidrodgers7224 3 หลายเดือนก่อน

      I faced this too, in a husqvarna...contact hydro gear and they will issue a warranty replacement, my local husqvarna dealer did this after several bigger shops and mechanic shops said wasn't covered...I was in shock none of the other shops k ew to do this, it saved my mower

    • @jakerose1203
      @jakerose1203 2 หลายเดือนก่อน

      I've had a John Deere la105 19.5 Briggs, 6 speed for about 15 years, no problems, only had to change the drive belt,deck belt, and idler pulleys for deck and transmission. I have almost 300 hours

  • @jimdodge5766
    @jimdodge5766 ปีที่แล้ว +77

    Hey give him a big round of applause.
    He is honest.

  • @Tolbat
    @Tolbat ปีที่แล้ว +63

    So just to speak up as an owner of the Z335E - Have had the mower a year. Have not had to add any air to the tires, nor have I had any issues with the mower. I mow a 1/3 of an acre and help my neighbor mow sometimes, she has a large yard. I do have the plastic casters, but they were greased from a factory. I never have a need to adjust the deck on the fly and do it when the mower is off from a standing position. I never EVER STAND on my deck. My deck is rinsed after each use and looks brand new after a year of use. You made me feel good about the engine though that was my only worry. If you have a rough, uneven yard, maybe it's a bad mower, but for me it's been reliable and makes mowing MUCH faster and easier. That said, I would NOT Pay the current prices for any of these mowers, I would find a good used mower that has low hours. The price has increased 15 percent since I bought mine, and I also got the 10percent veterans discount at Lowes. So, I paid 1000 less than what you see today. Buy what works for you. My mower cuts beautiful clean paths through the yard and I have no complaints yet.

    • @Tolbat
      @Tolbat ปีที่แล้ว +10

      Update - I ran into a stump yesterday at half speed on accident with the deck. The deck did not take any damage, even though it stopped dead and I almost came off the seat. Not sure what this guy is talking about. Other than the front wheels which do nothing. No issues with mine they are just cheaper designed like he says.

    • @mkwiswes
      @mkwiswes ปีที่แล้ว +3

      I have the Z345R with 180 hrs. No issues, but I do wish I went with a different brand. I do all the maintenance and I feel like they make it purposefully difficult. Oil drain hose is to short, spindle grease fitting are difficult to work with, deck leveling has plastic in the way for standard tools.

    • @johnlawson656
      @johnlawson656 ปีที่แล้ว +5

      I have a z335E. Going on 8 years. Never had an issue. (Knocking on wood)

    • @Moses-w3q
      @Moses-w3q ปีที่แล้ว +4

      Same here had mine for over a year no issues!

    • @libertarianman69
      @libertarianman69 ปีที่แล้ว

      Damn you paid $10,000 for it?

  • @privatedata665
    @privatedata665 ปีที่แล้ว +345

    I was a Tech and a Service Manager for many years at a GM garage . This Man took the time to make this video and share his mechanical experiences , what he sees as common failures & I appreciate his opinion and experience very much . Some people who own the models mentioned may never have a problem BUT why take the chance ? We experienced this too on GM cars that had expensive common failures . Occasionally one of these cars would perform great with no issues . Thanks for the video , we will be shopping for a mower soon .

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +15

      Thank you Private data for that comment!

    • @jameswatson4110
      @jameswatson4110 ปีที่แล้ว +24

      What better place to get good advice? This man works on these products he knows them. Thank you sir I will keep this in mind

    • @markp.7165
      @markp.7165 ปีที่แล้ว +14

      I am not questioning this gentleman's conclusions however the only way you can know the failure rate of these mowers is to know how many are being sold and how many of those are failing. JD knows those figures and I would have to think that that percentage has to be at acceptable level or JD would not allow their name to be tarnished with a bad product. It is all about the numbers and we really don't know those numbers we only know that some bad ones are showing up at this mans shop. Is that 30% or 3% of the ones sold?

    • @ifyoutip
      @ifyoutip ปีที่แล้ว

      ​@@markp.7165it's really bad. Them mowers are junk. My neighbor bought one of the John Deere ones. Everytime it broke and he got it fixed he thought it should be good now. It just got worse and worse. I believe his deck broke at the welds were the anti scalp rollers are very early on. I bought an exmark because I got over 2 acres to mow. 1100 hours and still going strong. This junker has 7 hours? My other neighbor across the road bought a big commercial 72" John Deere powered by yanmar diesel because he had about 4 acres to mow. It was in the shop 5 times in the first season. And that was supposed to be a good one he paid probably 15-17 thousand for. I'd buy a used commercial grade scag, exmark or toro before a new residential class junker. There is a reason the professional landscapers use exmark and Toro.

    • @michaelmitrosky8432
      @michaelmitrosky8432 ปีที่แล้ว +3

      That is a very important question.

  • @RichardCWard
    @RichardCWard ปีที่แล้ว +3

    Thank You for providing this information, my next door neighbor has a John Deer Riding Mower, he mowed lawns for income when he was a college student, he mows his neighbors (older folks) lawns (no cost) when he mows his own.

  • @youtubernaz1scensoredbythe201
    @youtubernaz1scensoredbythe201 ปีที่แล้ว +20

    I love mine! I use it on 2 acres. Never have ANY problems with it...

    • @DAD0123
      @DAD0123 5 หลายเดือนก่อน +1

      Same here only 1 acre. Best riding, cutting, maneuvering mower I have ever owned.

  • @johndunning9
    @johndunning9 ปีที่แล้ว +10

    59 years old I've had many mowers. I remember when there were lawn tractors instead of lawn mowers. Like everything they built things cheaper and charged more. On a small flat lawn and if you take it easy with the mower you'll probably be ok with the cheaper mowers with proper maintenance. But if you have hills and large areas to mow, you would be better off spending the extra money. Thank you for this video great information!

  • @sawwbones
    @sawwbones 4 หลายเดือนก่อน +6

    Thank you so much for this info. You saved me from a big mistake. Had almost decided to buy one from Lowe's. After your video went over to take another look and sure enough a plastic Transmission. Gonna check out some others.

  • @johnanderson4808
    @johnanderson4808 ปีที่แล้ว +9

    Great video and good advise. Went with a Bad Boy ZT Elite 60' deck and 747CC Kohler engine (avoid the Suzuki engine. Their advice). 0 disappointment. Super easy to work on, not that it's needed much. 100% designed to be be easy to work on and the deck even has "Step Here" decals. Been so impressed with it, picked up[ a 3026H Tractor as well. Same thing, super easy to work on and just hands down reliable. Word of advice, any mower that has a stamped deck instead of a welded one is one to avoid. For those not in the know or new buyers, if the deck is nicely rounded, contoured to the blades and the bottom of the deck is curled up, it's stamped. That means it's cheaply made and thin. A welded deck is much more angular, thicker will last much longer and usually has a reinforcement, visibly welded bar on the bottom. You get what you pay for.

    • @Fred-gv3kh
      @Fred-gv3kh ปีที่แล้ว +2

      I appreciate that info!! Thanks!!! Looking to buy my first riding mower after buying a house recently.

    • @mightytort4739
      @mightytort4739 7 หลายเดือนก่อน

      ​@@Fred-gv3khWhat did you decide on the mower? I'm doing the same right now.

  • @el1161
    @el1161 ปีที่แล้ว +71

    I've had the Z335 for 6 years and use it every week on 1 acre. I did replace the front wheel bushings last year only because I noticed some noise from them. So, except for regular seasonal maintenance I've spent a total of $15 in repairs. The unit's been the best mower I've ever owned and the price was reasonable. I wish I had bought it sooner!

    • @youtubernaz1scensoredbythe201
      @youtubernaz1scensoredbythe201 ปีที่แล้ว +6

      Had my Z track for about a year. Same here too. I love mine.

    • @afstring
      @afstring ปีที่แล้ว +6

      Just bought a z325e and everything he said about that mower does not even look close to what he is saying. Not sure what year this mower is but the things he points out are completely wrong. My mower works great.

    • @jhudson19956
      @jhudson19956 ปีที่แล้ว +4

      5 years in I haven’t had one good year with the same mower.

    • @derekm3180
      @derekm3180 ปีที่แล้ว +2

      haha same here - all I've ever had to do on mine is replace/sharpen the blades every few seasons, and change the oil and air up the tires once a year. I hope I haven't jinxed myself....

    • @wraith2440
      @wraith2440 ปีที่แล้ว +3

      I’ve got a 2023 Z330R and the issues described are no longer a problem.

  • @tomn5880
    @tomn5880 ปีที่แล้ว +18

    I recommend the John Deere S240. You get a 300 frame, front axel, rear axel and a a Kawasaki V twin engine.

    • @cordbanks6372
      @cordbanks6372 ปีที่แล้ว +1

      And it’s a beast of a mower

  • @freed6343
    @freed6343 ปีที่แล้ว +8

    I purchased a "residential" 42" Toro Timecutter with a fabricated steel deck and the "My Ride" suspension system a couple of years ago to replace a 42" Timecutter with a pressed steel deck. The only complaint I had with the old machine was the pressed steel deck... which is why I purchased the "same" machine only this time with the fabricated steel deck (which they call "iron forged"). I had to do some repair work on the pressed steel deck because of stumps I ran over, bending/breaking some parts underneath. (Also destroying the blades) I appreciate your taking time to make this video and will agree that there are some real pieces of junk out there. That being said, I will stand behind the quality of my most recently purchased machine FOR RESIDENTIAL USE... indeed, the next step up would have been a commercial unit although the machine I purchased does come in 46" and 52" 'residential' as well. Toro has made many improvements over the years, and if you purchase the dual bagging system ($900) it simply cannot be beat even by powered vacuum systems- it picks up everything. I did sell my old Timecutter to one of my neighbors for $400, and he's still using it. While Toro is the company's main brand, they also include commercial equipment like Exmark, Ditch Witch, Spartan as well as some of the finest rough, fairway and greens golf course maintenance machines available. I also have a 22" "Personal Pace" walk behind manufactured by Toro. MTD did make entry-level garden tractors and walk-behinds for Toro a few years back- whether they do or not now, I am not sure. Most of the "pieces of junk" you refer to in your video are manufactured by MTD. I think MTD is associated with (or owned by) Murray. It all boils down to "you get what you pay for"... As a side note, I will never buy another pressed steel deck zero-turn machine. The difference between one of those and the fabricated steel deck I now have are day and night.

    • @MeetJoeBlack55
      @MeetJoeBlack55 ปีที่แล้ว +1

      I agree ... and the reason I bought a smaller residential zero-turn from Bad Boy Mowers .... fabricated EVERYTHING .... HEAVY-DUTY design and production. I thank my salesman everyday for recommending it.

  • @scome98
    @scome98 ปีที่แล้ว +10

    I've got a Z335E used with the property. Served me well for 4 years, but I can see what you are saying. Although mine has taken quite a bit of abuse on 30+ acres where I had to use it to mow the pasture a couple of time. Got lots of hours on this thing and it's time for some much needed maintenance and love.

    • @deeremeyer1749
      @deeremeyer1749 ปีที่แล้ว

      It's far beyond "much needed maintenance". MAINTENANCE MAINTAINS MACHINERY IN "LIKE NEW" CONDITION. IT CANNOT BE "DEFERRED" AND THE DAMAGE DONE BY ABUSE ON TOP OF "LACK OF MAINTENANCE" UNDONE BY "DEFERRED MAINTENANCE" AND THINKING FINALLY "MAINTAINING" IT WITH "LONG OVERDUE" SERVICE - LUBRICATION, CLEANING ESPECIALLY BEYOND "SKIN DEEP" TO GET "GRASS CLIPPINGS" OUT OF EVERYWHERE UNSEEN THAT MUST STAY CLEAN TO AVOID FURTHER ABUSE DUE TO OVERHEATING (EVERYTHING ON THAT UNIT IS "AIR-COOLED" ESPECIALLY THE TRANSAXLE) AND SERVICING IT WITH THE CORRECT - NOT "CLOSE ENOUGH" - LUBRICANTS AND PROCEDURES AND PARTS "OVERPRICED" OR NOT IS SHOWING IT SOME KIND OF "LOVE" AS SOMEONE DUMB ENOUGH TO MOW 30 ACRES OF "PASTURE" IS NOT GOING TO HELP THAT "RESIDENTIAL" LAWN MOWER ONE BIT.
      CERTAINLY NOT THE WAY YOU REALLY WANT IT "MAINTAINED" WHICH IS IN "RESALE VALUE". DUPONT OVERHAULS AND A LITTLE "MAINTENANCE" AND SUPPOSED "LOVE" DON'T FOOL LAWN EQUIPMENT "STEALERSHIPS" AND THEY DON'T TAKE "TRADES" WITH NO "MAINTENANCE RECORDS". IT ALSO TAKES 2 MINUTES TO GOOGLE EARTH YOUR HOME ADDRESS AND SEE JUST HOW "RESIDENTIAL" YOUR PROPERTY IS.

  • @lordnikaderm2607
    @lordnikaderm2607 ปีที่แล้ว +22

    335e owner here. Almost 7 years, 150+ hours, and no problems whatsoever other than blade replacement and yearly routine maintenance. I use it to mow approximately 2-3 acres once a week during Spring/Summer. Have never seen the stuff you mentioned in the video...

    • @stackzent.tv3
      @stackzent.tv3 9 หลายเดือนก่อน

      Right

    • @hermanmunster714
      @hermanmunster714 8 หลายเดือนก่อน

      you cant be mowing 3 acres weekly, for seven years and have only 150 hours. Seems low or your acres are super flat and even, no trees and nothing to go around, just full throttle and done in half hour?

    • @lordnikaderm2607
      @lordnikaderm2607 7 หลายเดือนก่อน

      @@hermanmunster714 Yep, you pretty much nailed it. Flat, open, and full speed the whole time. And lately I've only been doing all of it biweekly, so I'm putting even less hours per summer. Also, I guess I didn't mention that - I only have to mow during the summer months.

    • @eddiewillers8379
      @eddiewillers8379 7 หลายเดือนก่อน +1

      I'm confirmed believer if you do regular maintenance such as oil changes and such you won't have as many problems

    • @lordnikaderm2607
      @lordnikaderm2607 7 หลายเดือนก่อน

      @@stackzent.tv3 damn straight lol

  • @davidbusekrus2336
    @davidbusekrus2336 ปีที่แล้ว +6

    I have a Z425 I bought new. I have had nothing but good service out of the unit. No problems at all for 3 years.

  • @gregkersey6106
    @gregkersey6106 ปีที่แล้ว +9

    I have a 345R , LOVE IT. 3 years, no problems front tires hold air. Deck seems solid, pulled deck to rust proof it, belts went back on easily. Was told it came from a John Deere plant. Will keep an eye on front bushings, so far they seem good.

    • @glickmpb
      @glickmpb ปีที่แล้ว +1

      I have the same mower I bought new about 3 or 4 years ago with the 21.5 HP engine. I haven't had one issue with it, so now I need to go check it out and see if it has those plastic bushings on the front wheels. ***UPDATE*** I just checked and it does :( However, I take care of my tractor and try to never cut in the rain. Not sure if that matters but I am sure I will have to replace them when they break :( Other than that it has been ok. I also put the engine guard on the back as well as the mulching door.

    • @paulp1166
      @paulp1166 ปีที่แล้ว

      I have a 345R also. The only thing I noticed on mine is that one side seems to go faster than the other with the handles all the way forward. Adjusting the steering handles with that stop bolt on top is useless. If anyone has any suggestions on that it would be greatly appreciated. Other than that I have had no issues with my mower.

  • @jeffhowell6053
    @jeffhowell6053 ปีที่แล้ว +30

    Other than the issues with the front tires not holding air, I have nothing but good things to say about my 335E. I've mowed 2 STEEP acres for the past six years with no problems at all.

    • @timkopp2204
      @timkopp2204 ปีที่แล้ว +5

      Get rid of it while it's still working. Lol

    • @stuartbear922
      @stuartbear922 ปีที่แล้ว +10

      Quite often, it's the operator, NOT the machine. Some people should not operate machinery.

    • @MattPiekarsky
      @MattPiekarsky ปีที่แล้ว +5

      @@stuartbear922Plastic bushings is a pass for me

    • @Carskinify
      @Carskinify ปีที่แล้ว +3

      @@stuartbear922 Yeah. They'd screw up an anvil.

  • @stratoman5504
    @stratoman5504 ปีที่แล้ว +20

    I appreciate your honesty and I hope you don’t get fired.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +4

      Haha I'll be okay either way. Thanks for watching 🍻

  • @789295
    @789295 ปีที่แล้ว +21

    I appreciate your video, however...My Z335E has nearly 500 hours on it with out fail. I do an annual maintenance on it myself. I did put a pair of bushings in the casters last year along with installing a grease zerk for them. I installed some "flatout" in the caster wheels and never looked back. No bent deck so far and it sure is heavier than those Cub Cadet/MTD junk mowers. This past winter I did replace the bearings in the deck spindles. The bearings didn't lock up but were sounding rough. I already had the deck off for annual cleaning and checks anyway. The bearing replacement was only about a 30 min job. I've been pretty happy with my Z335E so far. I bought my Mom a Z235 years before this one, and hers is still running and mowing fine. Basically the Z235 is the same mower. She is able to steer the Z235 without hurting her arthritic hands so much. She's 88 and still enjoys cutting her grass when she can.

    • @joep6023
      @joep6023 ปีที่แล้ว

      I see so many replies referring to the Z335, what about the Z315E which I just purchased. What's the difference?

  • @kurtneumann3164
    @kurtneumann3164 ปีที่แล้ว +4

    Learned my lesson with any product. Buy from dealer and get extended warranty. Not box stores! Appliances included!

  • @patrickdzagulones1076
    @patrickdzagulones1076 ปีที่แล้ว +22

    I'm an eetc certified technician, I work for a national small engine repair company for many years. That plastic transmission was used by Husqvarna for several years, it had so many failures they ultimately quit using it. As far as the compression releases go, in my experience I noticed the ones that failed more often were the ones that lacked regular maintenance such as oil changes. The 31r Briggs engine was Notorious for those to fail regardless of maintenance

    • @philliphall5198
      @philliphall5198 ปีที่แล้ว +1

      I agree on not changing oil and cam failure
      Even had a Honda GX 390 compression release stick and had to dis engine and free it up
      Change the dam oil people

    • @patrickdzagulones1076
      @patrickdzagulones1076 ปีที่แล้ว

      @@philliphall5198 also, on the smaller engines like on lawn mowers and pressure washers the gcv160 and gcv190 with lack of Maintenance I found the exhaust valves would stick, sometimes breaking the rocker arm

    • @Mike-su8si
      @Mike-su8si ปีที่แล้ว

      My craftsmen 18 hp ohv intek engine has that small problem but after buying it from the woman she had it over filled with oil the oil level was to the middle of the dipstick so i drained it down to the right amount and let it burn off whatever was left from being to full and then noticed i had to spin it clockwise a tiny bit it starts right up
      So the craftsmen 18 hp ohv intek has that problem what causes it though you think its from people not changing the oil
      I'd almost think it could get that way from people not adding any oil to it when its low on oil then that part on the camshaft heat up and warp then break it has to somehow because even old oil still lubricates the parts

  • @KevinHarveyBarratt
    @KevinHarveyBarratt 4 หลายเดือนก่อน +2

    I appreciate your honesty. The mowers being sold today are about double in price what they were even a few years ago, and it's unfortunate that JD is trying to cut into the economy market by downgrading quality. People think they can buy something for under $2000, but you get junk. I almost bought the E100 until I did some research and found out about the motor and transmission. I ended up buying a Craftsman T2200k which has some of the decent quality the JD sacrificed on the E100, like a Kohler 20hp V-Twin, and a cast aluminum transmission case. I don't have anything to report yet as it hasn't been delivered yet.

  • @raymondj8768
    @raymondj8768 ปีที่แล้ว +5

    Ive had Deer stuff so 14 years ago i bought a BAD BOY MOWER i finally have had my first problem a squeaky spindle they are great mowers there like tanks !!!

    • @georgem579
      @georgem579 5 หลายเดือนก่อน

      Thanks just bought a bad boy, right built like a tank

  • @ferdiecassel3697
    @ferdiecassel3697 ปีที่แล้ว +24

    Thanks for your honesty. I was questioning why a neighbor's JD yard mowers were constantly having the same issues you covered here. Very informative.

    • @leadnsteel1428
      @leadnsteel1428 ปีที่แล้ว

      Their tractors were good but the zero turns dont seem to be.
      The d series tractors are the best.

    • @barry4fish
      @barry4fish 9 หลายเดือนก่อน

      If you buy a Z-Trac zero turn from a JD dealership, you get the real deal, but not at the big box stores, those mowers are not the same even though they look like them. They cheap them down for those stores. I have had my Z335E for 8 years, no problems at all. I bought mine with a rebate that brought the price within a couple hundred dollars of Home Depot and Lowe’s, and better service from the dealer if you ever need it. This fact is common knowledge on the internet, don’t buy a JD from a big box store, you will have higher chance of problems.

    • @DAD0123
      @DAD0123 5 หลายเดือนก่อน

      Yeah right.

  • @philwood9760
    @philwood9760 ปีที่แล้ว +17

    In the 70's, you could buy a new car for $3000. Some new mowers are $5500 at Home depot.

    • @BritishBeachcomber
      @BritishBeachcomber 4 หลายเดือนก่อน

      Anything from Home Depot is built to break.

  • @Zappy1210
    @Zappy1210 ปีที่แล้ว +15

    I've had a 335 E Z-turn for 5 years now. I cut 3 hilly acres with it every week during the summer. Only issues to date is I had to replace the drive belt once, took like 5 minutes to do. Been very happy with this machine honestly. And yeah MTD makes these.

    • @harleythrelkeld7587
      @harleythrelkeld7587 ปีที่แล้ว +3

      i just feel personally if im getting mtd quality why not just buy a cub cadet and save the wallet and not buy the green and yellow markup

    • @Zappy1210
      @Zappy1210 ปีที่แล้ว +2

      @@harleythrelkeld7587 When I bought mine the Cub Cadet version was actually $100 more. Looking now, 5 years later, the Cub Cadet version is $100 less.

    • @harleythrelkeld7587
      @harleythrelkeld7587 ปีที่แล้ว +1

      @@Zappy1210 thats shocking honestly lol normally the cub, troy built or whatever else are a few hundred cheaper than the green counterpart

    • @Zappy1210
      @Zappy1210 ปีที่แล้ว +2

      @@harleythrelkeld7587 They all run for about $3400 currently apples to apples.

    • @harleythrelkeld7587
      @harleythrelkeld7587 ปีที่แล้ว

      @@Zappy1210 in ohio here a 54 inch cub is actually 3800 with a kohler engine and 4100 with a kawasaki deere is priced the same as the kohler but doesnt outright list engine manufacturer

  • @NEAFarmKid4010
    @NEAFarmKid4010 ปีที่แล้ว +4

    I mean, mine could just be a unicorn, but we've had a Z355E for 6 years now and its been a good dependable little mower. Just don't expect more out of them than what they are. Ours has 300-ish hours on it, no spindle issues, no issues with the Accel-Deep 48" deck (course we don't step on it to get on and off the mower, there's a built-in step at the front for that) and the little 22 horse Briggs and the Accel Deep 48" is running strong. My grandpa's had a Z445 since it was brand new in 2013 and its still doing great too. Has the 27 horse Briggs with the 54-inch deck. Nothing but regular oil changes, filter maintenance (oil, air and fuel) and keeping the blades sharpened and replaced when needed. Put a set of plugs in ours a year or two ago because it was time for it on the service interval chart, but it really didn't need them and I've kept the old ones around for spares. As far as the deck being hard to lift, just try running the older EZTrak series mowers like the Z445 my grandpa has. Has a straight lever to pick the deck up rather than one turned 90 degrees. 10 times worse in my opinion.

  • @joneschaeffer4156
    @joneschaeffer4156 ปีที่แล้ว +2

    I haven’t bought one yet but have been looking at all I saw on the John Deere I’ve heard that the metal is lighter duty And I have to thank you for your info thank you very much

  • @heep34987yt
    @heep34987yt ปีที่แล้ว +19

    Had mine 3 years zero issues so far works perfect.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว

      Hopefully you will not have any issues. Sounds like you know how to use and maintain one properly.

    • @cousinfester4621
      @cousinfester4621 8 หลายเดือนก่อน

      I have a five year old 345M with a 42 inch deck. It runs fine. I have the foot pedal to assist in lifting the deck. I have no need to need to step on the mower deck when climbing onto the mower. I've replaced the front tubeless tire with tube type and that's all I've done other than routine maintenance like blade sharpening, oil and filter changes and such.

    • @Ocalaman
      @Ocalaman 8 หลายเดือนก่อน

      What zero turn do you have?

    • @danbooher5843
      @danbooher5843 7 หลายเดือนก่อน

      U don't have any grass to cut and u know nothing about mowers.😅

    • @shannonhariel2745
      @shannonhariel2745 5 หลายเดือนก่อน

      mmm

  • @tracycarawan1152
    @tracycarawan1152 ปีที่แล้ว +2

    Have mowed two yards pretty much year round with a z335 300 hrs zero problems. Only changed oil and blades

  • @Ladybank7755
    @Ladybank7755 ปีที่แล้ว +45

    I am in New Zealand and I have had a Z355 E for three years and the only thing Ihave replaced is the deck belt. It is a great machine that mows over 2 acres of lawn weekly over the summer. Mows at great speed and leaves a great-looking result.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +5

      Thats good. It seems moslty more recent / newer mowers are having issues. We are seeing spindles and idlers with less than 10 hours on them have bearings making noise and feeling rough.

    • @michaelmactavish4445
      @michaelmactavish4445 ปีที่แล้ว +2

      @@Mechanical_Mind kubota are best wich i been using kubota zds there been great powerful mower with no issues and kubota transmissions are soild steel

    • @jameshill4900
      @jameshill4900 ปีที่แล้ว +2

      @@michaelmactavish4445 Good to know. I've had really good luck with my older Kubota T series lawn tractor very solid. Wasn't sure how the new ones were. I've heard the JD trans weren't the best overall but maybe that has changed.

    • @gary4738
      @gary4738 ปีที่แล้ว +5

      I LOVE mine!

    • @michaelmactavish4445
      @michaelmactavish4445 ปีที่แล้ว +1

      @@jameshill4900 the kubota still useing solid steel transmission plus the old t series mowers transmissons are still avaliable even parts as well like all the older kubota models from 1986 they still make parts for it as well wich deeres allways discontinuted makeing there parts for older models wich why kubota allways keeps there great value on there product when time trade the kubota dealers gives great trade in value like my neighbour got $10,000 for a small older g2160 with mower,blade,blower with cab wich he got more for trade in then he thaught the deere dealer here was gonna give him $300 to $500 on the whole thing wich was kinda rip off

  • @garry2280
    @garry2280 ปีที่แล้ว +2

    Well to late lol I have a z345R and absolutely love it. Of course I only use it on my lawn and it does a fantastic job. I do appreciate the information on what to look out for!!! I do a full service every spring on my zero. I mean Everything new spark plugs, air filter, oil filter and oil and fuel filter.

  • @msclecarcrzy
    @msclecarcrzy 2 ปีที่แล้ว +4

    My neighbor just bought a z335 and he loves it. But it's brand new and I wish him luck! Thanks for the honest review

    • @Mechanical_Mind
      @Mechanical_Mind  2 ปีที่แล้ว +2

      🤣 keep us posted. If you like him tell him to grease those front bushings, never step on the deck and cut high and nice and slow.

  • @Anonymouso283
    @Anonymouso283 10 หลายเดือนก่อน +2

    13 year old Z920 owner here with 1900 hours - Definitely go top of the line. Go balls out. You won’t regret buying the best of the best.

  • @williamgoodman9861
    @williamgoodman9861 8 หลายเดือนก่อน +10

    Im a landscaper and you are telling the truth. I would never buy that junkyard

  • @lukedawg357SIG
    @lukedawg357SIG ปีที่แล้ว +1

    I have a d100 I bought 3 years ago the belt came off with 20hrs no adjustment so I bought a smaller belt for a MDT fixed problem I wish this video would have been out before I bought it thanks for the information take care.

  • @jimkraft9445
    @jimkraft9445 ปีที่แล้ว +5

    I have a 335E and my tires front and rear have not lost any air in 3 years. I have had no issues with it at all. I only have about an acre to mow, and so far am very happy with it. Time will tell.

    • @kac1968
      @kac1968 ปีที่แล้ว +1

      Same here! Same mower. Have 41hours on it. Been very blessed no problems.

  • @davidmohr4606
    @davidmohr4606 ปีที่แล้ว +2

    Bought my Z235 from JD dealer here in South Dakota. NO problems at all in 7 yrs, except for ME hitting a stump and damaging the deck. Glad I went to dealer rather than Lowes or Home Depot (closest is 120 miles away). However, thanks for pointing out the differences and potential problems.

  • @clararedmond7727
    @clararedmond7727 ปีที่แล้ว +2

    appreciate the info...I have a 235z home edition since 2014 and has had no problems. I service it every 2 years because I'm the only one uses it. It has 140 hrs on it and never replaced battery. Hope it last another 8 years. thank you

  • @TheFishingHobby
    @TheFishingHobby ปีที่แล้ว +5

    I have a much older JD Z225 (about 12 years old or so) that I bought new and it has been awesome. The JD zero turn you show here looks like the newer ones I've seen and they look much lighter built than mine as far as the frame goes. So much so, I ruled them out as an option when I was recently looking at new mowers. My deck is in bad shape, and they are expensive to replace so I decided to buy a new mower instead. Amazingly, all parts on mine are original except for blades, battery, air/oil filters, oil, spark plugs and one of the mounts for the steering levers. Never changed a deck spindle or bushing/bearing anywhere on that mower and it has definitely not been babied in the least. It has only been used on my property (2 acres) and not used commercially, but for a residential mower it gets treated pretty harshly at my place LOL! I noticed the stamped steel steering arm mounts on the one you showed where mine were cast...those stamped steel new ones look pretty flimsy. I did manage to break one of my cast ones after several years, but I was also using them to help me pull it out of a muddy ditch on a regular basis...yeah I abused my mower! I was so happy with my old one, the residential John Deere zero turns were the first ones I looked at when I started shopping for a new mower. I was really disappointed that I was able to rule them out within a couple of minutes of looking at them.

  • @billrook6165
    @billrook6165 ปีที่แล้ว +5

    I have a 2022 Z345R. Only complaint I had was, the oil filter location. At best, it drains oil all over the frame floor when I take it off for service. I went to Briggs and bought a remote oil filter kit (part number: 594271) and relocated it to the rear, where it now drains between the frame floor and the rear bumper. Much, much better.

  • @rckdcknson
    @rckdcknson 8 หลายเดือนก่อน +3

    John Deere Z245 zero turn here....2008 model. Absolutely no issues since new. Replaced a few batteries as normal, keep serviced and still as new.

  • @mikey380sx
    @mikey380sx ปีที่แล้ว +13

    Great video, and solid criticisms about the cheaper JD's, especially coming from someone who works on these day in day out. Like a lot of commenters here I too own a Z335e that has been faultless, used it on a couple of commercial jobs too. But it's food for thought when it comes time to trade and upgrade.

  • @Edward-gf7wl
    @Edward-gf7wl 6 หลายเดือนก่อน +1

    Thanks a bunch for a lot of good info! I've had a J.D. LT-133 since 1999 and it's been maintenance free till this year(2024).Only one complaint, mechanically, was cranking but not firing. Only other complaint is how flimsy the hood is attached to the frame. Snaps and breaks very easily. Have to replace the hood assembly when this happens.....ridiculous!!!

  • @ronaldrose3633
    @ronaldrose3633 ปีที่แล้ว +6

    I thought about getting one of these or maybe a larger zero turn, but now I think I'll stick with my 1986 JD 185. Been mowing 2 acres for the past 20 years with few problems, same engine, never been rebuilt, still uses no oil. Kawasaki 17 hp single cylinder, 46 inch deck.

    • @hugoglenn9741
      @hugoglenn9741 9 หลายเดือนก่อน

      In 86 the good mowers started with the 300 series. The 318 is in cult status, I have a 332

  • @Evanx373
    @Evanx373 ปีที่แล้ว +5

    I have a z355r and it has 70 hours on it no issues. I mow 5 yards with it and its held up well so far. The castor bearings on mine are metal. It definitly seems like a very fragile machine but im glad to hear that the engine is decent on it. I have to run it to mow yards in my side gig till i can afford something better but ill definitly keep in mind to be extra careful not to bend the deck. Its a 2018 model

  • @larrycutliffe3597
    @larrycutliffe3597 ปีที่แล้ว +6

    Man I must have gotten lucky. My 335e has over 100 hours and just recently the starter solenoid failed. But that's it. Thanks for the video.

  • @williamjohnson7414
    @williamjohnson7414 ปีที่แล้ว +5

    Thanks for your honesty!

  • @is2good4u
    @is2good4u ปีที่แล้ว +3

    I have a Z345R, with 10 hours on it. Use it on a .75 acre lot. Run's like a Deere. Cuts like a Deere. Starts after being stored for a season. I have zero problems with it so far. Could go down hill I guess but hasn't yet. Maybe it's how people use them? Maintain them? I'm very happy with mine. BTW, I looked at a ton of reviews from people who live in the Florida area I do and most were positive. Thanks for the heads up though.

  • @jamesobergjr5032
    @jamesobergjr5032 ปีที่แล้ว +1

    Thanks buddy! I'm in the market for commercial mowers but I didn't know about the plastic transmission.

  • @darwindropmazda
    @darwindropmazda 2 ปีที่แล้ว +14

    Really appreciate your honesty! Anyone with a good common mechanical sense should notice those signs.

  • @IndigoSiberians
    @IndigoSiberians ปีที่แล้ว +2

    Thank you for this professional opinion video! I own an X300 and an X595 and have been seriously looking at JD Zero turns, both new and used, and I had some suspicion that they were cheaply made, by looking at all the plastic components. I would normally trust the John Deere brand but I can see the problems with these models. Thanx again.

    • @mattpryor-c2v
      @mattpryor-c2v ปีที่แล้ว +3

      Please dont waste your Hard earned $ on a JD Zero Turn Respectfully Speaking from past Owing One

  • @bmcdonald7303
    @bmcdonald7303 8 หลายเดือนก่อน +9

    I’m glad you’re willing to tell us the good, the bad and the very ugly. You’ve saved me from buying something that will be difficult to work on. I’ll subscribe purely on that.

  • @DarrenDay66
    @DarrenDay66 ปีที่แล้ว +1

    I bought a used John Deere Z445 zero turn mower about 4 years ago I use for my lawn care business, only problem I have had is I replaced the spindles ( one was bad but went ahead and replaced all 3) looking to get a new Kabota 422 by the end of 2023

  • @deanmiller294
    @deanmiller294 ปีที่แล้ว +4

    Truth of the matter is that every product that has multiple moving parts will experience a failure over time. Some will find this out in3 months, others in 6 years and in between. Have had a z335 e for 5 1/2 years. Mowed 2-3 times per week for 1 1/2 hrs each. I must be one of lucky ones. Other than a new battery, I’ve had 0 issues.

  • @TVJAB
    @TVJAB ปีที่แล้ว +7

    I have a z355e for over 6 years and I only had to change the deck belt once. Nothing else has ever happened to it. The machine is a beast and cuts great. It still has the original battery in it as well. I also have a larger zero turn ariens, but I prefer to use my z355e its just so much easier and less bulky than the ariens. Like many in the comments the tractor with the plastic transmission is garbage, but the zero turns are great and very reliable.

    • @jamesstewart2560
      @jamesstewart2560 ปีที่แล้ว

      No the z355e is trash.

    • @MemphisMojo15s
      @MemphisMojo15s ปีที่แล้ว +1

      ​​@@jamesstewart2560ut, the OP said his has been great for 6 years..If an owner likes their equipment, and it hasn't been bad for them, why bash someone else's stuff? Seriously man.

  • @AwosAtis
    @AwosAtis ปีที่แล้ว +89

    I guess I've been pretty lucky with my Z425. I've had it for 14 years with over 600 hours. I've changed the belts, both drive and blade and changed the crankcase gasket just last summer. Overall I find it a very DIY friendly mower. I started doing my own work on it after my very first maintenance at the dealer cost me over $300. I think I'll keep it until the government tells me I can't burn gasoline anymore.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +20

      Mowers back then were built better

    • @1red_nextview740
      @1red_nextview740 ปีที่แล้ว +14

      14 years ago, it was probably made a lot better than they are now.

    • @ChrisM-gv2st
      @ChrisM-gv2st ปีที่แล้ว +6

      2009 Z425...replaced battery one time and belts. Awesome machine.

    • @AwosAtis
      @AwosAtis ปีที่แล้ว +7

      @@1red_nextview740 That's the common feeling. I just got back from Lowes and looked over the new models closely. I'd venture to say they are built as good, or better, today. I wouldn't hesitate to buy new but I plan to use my current 14 year old Z425 and my 15 year old LA145 until I can't mow anymore.

    • @stuartbear922
      @stuartbear922 ปีที่แล้ว +19

      Quite often, it's the operator, NOT the machine. Some people should not operate machinery.

  • @mffisher123456
    @mffisher123456 ปีที่แล้ว +2

    I can relate to the cam issues with compression release not working. I have a craftsman rider with a Briggs engine 9yrs old. I have had to replace the cam twice now. Your spot on with your video and warning viewers to stay away from these single cylinder engines. And agree, its not fun to replace the cam. Time consuming. Thanks for your video.

    • @frankcastle5294
      @frankcastle5294 7 หลายเดือนก่อน

      Two cams? Really? I'd kill myself.

    • @mffisher123456
      @mffisher123456 7 หลายเดือนก่อน +1

      @@frankcastle5294 Yep! First time it took me about 3 weeks. I needed time to review the situation, finding a couple of good you tube instructional help videos, and then took my time replacing the cam. The second time around I knew what to do and it took me 3 days. If this release spring breaks again on the cam, then I'm done with the mower and I'm buying a new one. Probably will go with a mower that has a Kawasaki engine.

    • @frankcastle5294
      @frankcastle5294 7 หลายเดือนก่อน

      @@mffisher123456 I hear ya and all these big displacement thumper 4-strokes need some sort of compression release feature but seems the failure rate on the B&S style one is exorbitantly high. My 18.5HP BH&S Intek is coming up on 500 hours run time and still runs and looks like new but just replaced charging system. Hoping I never have to get inside the engine. Regards, John

  • @stevedoherty1257
    @stevedoherty1257 ปีที่แล้ว +11

    I own a z335e and absolutely love it. I installed an optional foot controlled deck lift kit that bypasses the hand operated one and allows me to use my foot to raise the deck while avoiding scalping the lawn when encountering brief high ground. The engine is strong, the speed is exceptional and the entire unit has been an absolute joy to own and use. I am finishing my second season with it and would never consider getting rid of it.

    • @silverstake88
      @silverstake88 7 หลายเดือนก่อน +1

      Wonderful. Sssssssuper. Today you love it - when it breaks (and breaks often) you will "reconsider."

    • @davidaaaa4611
      @davidaaaa4611 7 หลายเดือนก่อน

      @@silverstake88 I would not trade my John Deeres for any other brand. I

  • @USN1985dos
    @USN1985dos หลายเดือนก่อน +1

    Man, props to you for working for a dealership and still dropping dimes on Deere.
    My family owned several Deere dealerships in the southeast, and although they have a lot of great offerings, like you said, there is absolute junk as well. We largely focused on the golf/sports turf side of Deere's products, but still.

  • @superglide9068
    @superglide9068 10 หลายเดือนก่อน +4

    Great honest review. I'm glad I watched your video. I think a lot of ppl don't realize that there is a big difference in zero turn commercial units & for most ppl a lawn tractor will take more abuse.

  • @Derek_00Mustang83
    @Derek_00Mustang83 ปีที่แล้ว +1

    My cub cadet has been doing the compression release thing every once in a while. Took it to a dealer and they said it was a starter solenoid and replaced it. Got it back and it still does it randomly, thank you for helping me find my issue!!!

  • @MichaelGay-g5q
    @MichaelGay-g5q ปีที่แล้ว +5

    The broken camshaft issue is not just on John Deer mowers. This is a Briggs & Stratton engine issue. If you do replace the camshaft, make sure to use an OEM part. The cheap Chinese parts will not last and you will be tearing the engine down again possibly in the same season. As an alternative solution, a local repair shop advised me to look into a high torque starter which would eliminate the need to use the 'burping' camshaft design altogether. I think it was about $189 for that starter so a much more expensive option.

    • @kevinwhitworth2527
      @kevinwhitworth2527 ปีที่แล้ว +2

      My craftsman suffered the same problem. I agree a Briggs problem.

  • @Planeiron
    @Planeiron 8 หลายเดือนก่อน +2

    I have a D140 bought in 2009 Battery a few belts, new blades, but I keep the oil changed every 40 hrs, get the Kit change oil filters plugs, Grease deck she has been a goodun....gotta work on the steering but it's a keeper

  • @GT47179
    @GT47179 3 หลายเดือนก่อน +3

    Bought a S240 this season.....been good so far 😊

  • @sapelesteve
    @sapelesteve 6 หลายเดือนก่อน +1

    Glad that I found this discussion. I was considering purchasing a new JD Z345M 42in. 22HP Zero-Turn mower because I can pick it up for a great price ($812.00!). I know that the newer ones are built better but I am now having second thoughts about buying the mower. I have owned JD mowers in the past and have always had good results. Anyway, thanks for posting your no nonsense honest opinions in this video! 👍👍

    • @old_dan
      @old_dan 5 หลายเดือนก่อน

      I have a Z335E for 3 yrs and haven't run into any problems. I would say you should be fine but all mechanical things can break.

  • @scottleitch2957
    @scottleitch2957 ปีที่แล้ว +3

    I have had that exact Z335E for over 5 years, mowing 1 to 2 acres every 2 weeks most of the year. Wet, dry, too tall, it just goes and goes. I do keep it clean and well maintained. I will admit the front caster bushings are junk, and the drive belt is hard as hell to replace.

  • @ericlindstrom8569
    @ericlindstrom8569 ปีที่แล้ว +2

    I have a Z345M and the first two things I did was replace the front tires with solid tires and bought the deck foot lift kit. I never step on the deck and I am so glad you said the engine was good or I'd take your advice and get rid of it - but I think I've solved several of your criticisms except for the front swivels or "bearings". I'm in the market for decent replacements if they ever become available.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว

      If you put some grease on those caster fork spindles it will help them last much longer and they are easy and cheap to replace. Just a silly idea they had in an attempt to save a dollar by putting those plastic bushings in there. Thanks for watching!

  • @scotty2307
    @scotty2307 ปีที่แล้ว +23

    This is why I actually went to a John Deere dealer and bought an S240. Aluminum transmission, heavier frame, and Kawasaki 2 cylinder engine.
    One word of advice for all yard equipment, if it is available in your area, use non ethanol gas only, for your equipment.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว

      I like the S240s

    • @happycamper5900
      @happycamper5900 ปีที่แล้ว +2

      Shade tree here. Ethanol gas keeps me busy fixing the neighbor's equipment. I had a brand new mower given to me last week. The carburetor was full of jelly caused by ethanol.

    • @MeetJoeBlack55
      @MeetJoeBlack55 ปีที่แล้ว +1

      Good rule of thumb .... if it's got a carburetor = use NON-ethanol gas ..... old car, old truck, lawn equipment, go cart, etc..... NON-ethanol gas only. I also use Sta-Bil gas treatment all the time .... keeps the headaches away !!

    • @oilfieldman1209
      @oilfieldman1209 11 หลายเดือนก่อน

      May I ask what you paid for it?

    • @scotty2307
      @scotty2307 11 หลายเดือนก่อน

      @@oilfieldman1209 I paid about $2300 about 8 or 10 years ago at my local John Deere dealer. Looking on their site now, they are asking $3450. They have made some improvements to the deck, so between that, and inflation, I guess that justifies the price hike. I think they have added a lever operated mulch changeover so you no longer need to buy the mulch plug.

  • @OU_Grad
    @OU_Grad 7 หลายเดือนก่อน +1

    Thanks for the video. My 2005 L120 lawn tractor, after replacing the PTO, has been very reliable with regular annual maintenance on 3 acres. Very difficult to buy equipment these days with 30-day limited warranties.

  • @chadfield376
    @chadfield376 ปีที่แล้ว +4

    Just came across your video in a random search; good honest review; big manufacturers like JD need to stop cheapening their products for a larger profit margin. People will pay more for a quality built USA made product. Also agree it’s stupid for JD to even think a plastic transmission would have any long term durability but then again like car makers, the engineers design flaws in certain key parts to break so the consumer is more swayed to just buy a whole new mower every 2yrs vs keeping a well built machine for 20.

    • @michaelmactavish4445
      @michaelmactavish4445 ปีที่แล้ว

      yeah kubota has the soild steel transmission on theres wich why kubotas are made solid strong beast mowers

  • @jimherrmann1165
    @jimherrmann1165 4 หลายเดือนก่อน +1

    Love this video! Was thinking about a new mower not any more. I’ll keep my 30 year Deines zero turn working

  • @Dstromb232
    @Dstromb232 ปีที่แล้ว +5

    I have the S100 from Lowes and it has the metal transmission. John Deere went back to the metal transmission due to a lot of warrantee work done on them. Dealer told me out of 10 mowers 8 of them will soon have trouble problems. And I think they improved the cam also. I could not complain, I bought my for $1499.00 because it was priced wrong, Then I had a 10% off coupon which was another $150 off and they had to sell it to me for that price. Plus, John Deere had a promotion when you buy one of these mowers you got a free cart plus free shipping. I turned around and sold it for $200.00 Could not pass it up.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +2

      I noticed they ditched the plastic transmissions recently. We had a mountain of plastic transmissions at the dealership years ago from all the warranty replacements

  • @danieldargis7429
    @danieldargis7429 ปีที่แล้ว +1

    I have a Z335e with aprox. 650 hours on it(i use it commercially) and what the guys says is right...plastic bushing breaks. front wheels need to be inflated often( i keep an air compressor in my truck almost just for that) the drive belt was replaced once(not a very hard or expensive job to do) the solenoid in the back near the rear bumber needed to be replaced once(JD upgraded the piece)and 2 inside solenoid under the cover needed to be replaced....good first zero-turn for the money to start my business but next year i'll put that one on the sideline and use it only has a backup unit. Next zero-turn will probably be a Z500 series from JD or a Z200-400 series from Kubota...what do you think?

  • @rnoitheryet9087
    @rnoitheryet9087 ปีที่แล้ว +6

    Mechanical Mind, if you just can't afford a commercial level mower for residential use, what zero-turn would you recommend of the Deere series, or another brand? Thanks for the honest information!

  • @ronrice2249
    @ronrice2249 ปีที่แล้ว +2

    We have a 525 and it gets alot of use. Had it a few years. No problem so far.

  • @rightsideofthegrass8114
    @rightsideofthegrass8114 ปีที่แล้ว +5

    A couple of observations: (1) The B & S 17.5hp engine is not unique to John Deere products. It is an engine widely used on many other tractors of that same price range - Craftsman, MTD, Troybuilt, etc. It is the same 500cc engine, with minor variations, such as electric start vs. rewind start. I have a 26 year old Exmark Viking, 36" w/b. It has mowed commercially for thousands of lawns. It has no hour meter, but probably has over 10K service hours. I wore out two Kohler Pro Command 15 engines. Four years ago (Fall 2018), I needed a replacement. Kohler no longer makes Pro Command 15. The only single cylinder engine available, fitting the bolt pattern and space envelope was the B & S 17.5hp engine. I knew it was a consumer grade engine, but I needed something to get me through my work season. I put on a 31R976-0016-G1, rewind start. It not only got me through the rest of 2018, but is now working in the 2023 season. I suspect it has well over 1,000 hours, far beyond expectations. It starts well and has good power. The only thing I have done is reseal the valve cover (no gasket, just sealant). I have maintained several Craftsman tractors with the same series of engines (the cheap Craftsman line, 42" decks). All have worked flawlessly, but the owners are only using them 30-35 hours per season. I have never heard of one engine having a problem with the compression release feature.
    (2) I would agree the JD consumer ZTR is not a very good mower. In the end, you only spoke of the front caster bushings as being a problem. "... the transmission is plastic, ... don't buy it..." Sorry, but this provides no reasoning. I have used Honda HRX217 hand mowers (high-end consumer) for more than 15 years, all plastic decks. These mowers have been outstanding in service, despite seeing commercial use - all with plastic decks. Calling the JD ZTR mowers "junk" without a reasoned argument is not meaningful for your viewers. People need to know "why" in order to make use of your assessment. As for the hydro drive belt coming off at 7 hours, a reasoned explanation why would make that part of your video useful. Just making the observation is not meaningful. The fact that it happened MUST have a reason - wrongly assembled, broken idler spring, misaligned idler, bad pulley, etc. Coming off the pulley does not happen without reason. I run a JD 717A, 13 years, over 5,000 hours and have had two hydro belts wear out, now starting to run on the third one. Over all those hours, I have had the hydro belt jump off the pulley twice - both times when running over a stick and getting the stick pushed up against the belt. The belt was off and the stick still firmly in place. This is no fault of the mower.

    • @mikecoughlin4128
      @mikecoughlin4128 ปีที่แล้ว +2

      @Michael Richards not negating any of your input but he did say lots of these parts are used by lots of brands in the first few minutes. He also did give a reason for not liking the plastic transmission was if it breaks it’s very expensive to replace, likely more than the value of the mower itself.

  • @Buddha-of8fk
    @Buddha-of8fk 6 หลายเดือนก่อน

    I bought a Z235 years ago at the John Deere dealership and other than normal spring time up keep it's been running great. My ZTURN does have grease fittings on the front casters and mower deck.

  • @lrvb7279
    @lrvb7279 ปีที่แล้ว +11

    I've had my Z235 for 8 years. A few years ago, the front caster wheel pivot bushings got a little loose. Replaced the fiber bushings with brass bushings and drilled and tapped for grease fittings. Still tight years later. Almost 400 hours and the upper pto clutch bearing started getting a little noisy. Removed the clutch, popped the sesl out and injected some grease into the bearing. Sounds good. Nothing wrong with these mowers.

    • @robertsimon276
      @robertsimon276 ปีที่แล้ว +1

      I agree I had one for 9 years and one dry summer cutting around a tree the roots were more pronounced because of the dryness and my blades cracked into my deck! STAMPED DECKS ARE TRASH!

  • @ts5030
    @ts5030 ปีที่แล้ว +1

    ive had my M series zero turn JD for about 5 yrs mowing an acre,,,,FLAWLESS OUTSTANDING PERFORMANCE.............never an issue

  • @timvala7577
    @timvala7577 ปีที่แล้ว +82

    I knew a guy that told me you can paint an out house green. Call it John Deere and people will buy it.😂😂

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +21

      You could paint a dog turd green and yellow and JD fan boys would not only buy it, they would eat it and say it was great.

    • @Erin-bd6jg
      @Erin-bd6jg 6 หลายเดือนก่อน +5

      So, the Apple of outdoor equipment.

    • @ralphllivrah9551
      @ralphllivrah9551 5 หลายเดือนก่อน +1

      No they earned their reputation back in the day. I know in the 80s Deere made the best tractor,by a mile, wasn’t even close. Not sure about them today. I know they outsource alot,and get paid to put they name on others junk. Home Depot John Deere is not John Deere. You gotta get the x series stuff.

    • @DAD0123
      @DAD0123 5 หลายเดือนก่อน

      "I knew a guy". Always a sign of a liar.

    • @timvala7577
      @timvala7577 5 หลายเดือนก่อน

      @@DAD0123 The liar you’re referring to used to live in Rockford,Iowa. The guy I referred to was Darrel Bass who owned Case tractors. Go there and ask anyone. Darrel is gone but we all remember him and things he said. ASS HOLE!!!

  • @billstmaxx
    @billstmaxx ปีที่แล้ว

    The 0 turn also breaks the arms that the castor wheel is mounted too.. Mines done 2 so far..

  • @normanott644
    @normanott644 ปีที่แล้ว +3

    I have had a Z 425 for over 10 years with no issues, of course I serviced it regularly a haven’t abused it.

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว +1

      A ten year old Z425 is a completely different mower and far better made then the late model z335e I talk about in this video. These things always have the same problems. But for the 2023 year model John Deere has solved 4 of the 5 things I mentioned was a problem with the Z335. Thanks for watching

    • @normanott644
      @normanott644 ปีที่แล้ว

      @@Mechanical_Mind You’re right the newer units are built on the cheap I see it in my shop.

  • @Cynthia-h3y
    @Cynthia-h3y 3 หลายเดือนก่อน

    That was a very interesting video. Thank you. I just bought a Bad Boy 60 inch zero turn. It was doing great until the belt broke. I only have about 8 hours on it. It looks like it just split and it was very hot.

  • @HexedInOhio
    @HexedInOhio ปีที่แล้ว +8

    Not sure about the Z335E line but I bought a Z355E from Lowes way back in 2019 and it's been solid as rock for 115 hours. Perhaps in the last few years they cheapened up some but I've had nothing but good to say. Starts up quick, no issues with wheels, tires or spindles and the deck has taken some bad beatings and still looks great. Informative video though

    • @alexnelson09
      @alexnelson09 ปีที่แล้ว +2

      I got one in 2011 that I just sold running and bought a new Z355E. I added the foot pedal deck lift and fabricated two more anti scalp wheels for the back of the deck. I love them and I feel confident ti could replace anything on them if I ever had to.

    • @sunnybeech74
      @sunnybeech74 ปีที่แล้ว

      I hate to say this but 115 hours isn't a whole lot for a mower. I do hope your luck holds out.

    • @HexedInOhio
      @HexedInOhio ปีที่แล้ว +1

      @@sunnybeech74 Ironically, we sold it to a relative as we needed a bigger mower for a larger yard since moving. Bought a used 2021 Z530M 54" with 54 hours for about half the new price. Still have faith in these mowers.

    • @sunnybeech74
      @sunnybeech74 ปีที่แล้ว

      Ah OK. Well I hope both mowers hold up well for you all. The newer mower you purchased probably wasn't made by John Deere either though but I'm not 100% sure.

  • @robertwhite9898
    @robertwhite9898 ปีที่แล้ว +1

    Thanks for the info! The brands I own is Honda & Cub cadet. Both are good brands.

  • @Chief_5
    @Chief_5 ปีที่แล้ว +11

    Awesome content. I have a JD LA125 it lasted 12 years before I had to replace the head gasket! After I changed it, running better than ever! 👍

    • @knowledge5106_
      @knowledge5106_ ปีที่แล้ว

      Looking into my first ever riding mower and watching a review about that exact one!

    • @jasonsquires7677
      @jasonsquires7677 ปีที่แล้ว +1

      In Canada here, I have a LA125, I’m mowing an acre, I’ve had it for 17 years. I do the maintenance every spring, I blew the crankshaft before the warranty expired and John Deere replaced the briggs and straton motor. It’s been reliable for over 13 years now with regular maintenance. I changed the drive belt every 5 years and the deck belt every three, replaced deck bearings and some bushings. Easy maintenance and a reliable machine, I will be buying another one soon.

  • @rookie1514
    @rookie1514 ปีที่แล้ว +1

    🤷🏼‍♂️I have a Z335E and for the last three years it has run 💯 to my satisfaction… really some of the issues you identified are small or have never happened to me. I mow about 1 acre of lawn weekly for 6 months of each year 👍👍

  • @clintsinger6893
    @clintsinger6893 ปีที่แล้ว +4

    having just retired after a great 40years plus doing this work i will say that you are right on the mark. the small single cylinder intek engines are prone to lots of troubles, just like the customers that walk into the shop with what we used to refer to a weedeater in a bag and want it repaired for 20 buck. all one has to do is look at the zero turn and it even looks like it would break if the wind hit it. anyway good information young fellow.

  • @alexpalacio7758
    @alexpalacio7758 ปีที่แล้ว +1

    Love this video had a lawn tractor with plastic transmission and got rid of it, now I'm looking for a better lawn lawn tractor what recommendation on a good brand lawn mower..

  • @americanazheck
    @americanazheck ปีที่แล้ว +12

    I've owned mine for seven years and had zero issues. One belt and one battery ..Love my Deere.

  • @johnduffy6546
    @johnduffy6546 ปีที่แล้ว +1

    Thank you for your candid information. I have been a die hard JD owner for 40+ years and I have noticed a rapid decline in the quality of their products. (i.e. the John Deere "branded" engines)..I'm calling bullshit on this one! I'm guessing they are Briggs/Stratton made in China or similar...When my current rider dies, I'm switching horses to Cub Cadet with the Kohler engine...I have NO LOVE for Briggs and Stratton after a warranty debacle several years ago...Kohler has never let me down...Long lasting, smooth running, worry free

  • @Dale37
    @Dale37 ปีที่แล้ว +5

    I have 365 hours on a z355e. They must not be too bad. I will say the drive belt and deck lift cables do suck to replace. 😅 I'm not complaining that they lasted so long, though. I retired it with a z530m this year. Hope it lasts without much fuss.

  • @trevorfloyd8447
    @trevorfloyd8447 ปีที่แล้ว +1

    Got a Z355R 3 years ago from local dealer. 100% trouble free besides regular maintenance with 88 hrs on it. Mows 2 acres a week. Any foreseeable problems?

  • @jaya.0069
    @jaya.0069 ปีที่แล้ว +3

    Wow! Perfect timing finding this video. I'm looking to replace my 2007 - 42 inch cut Cub Cadet ZT mower. You've got me now considering keeping it a bit longer and making minor repairs on it. Thanks for this video! (Just subscribed also)

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว

      Your 2007 was probably built better. This new stuff is built so cheap

    • @allanstriber5272
      @allanstriber5272 ปีที่แล้ว

      Ya keep your cub cadet I had a John Deere every year has to replace something. Bought a cub cadet love it and half the price

  • @scottrussell6717
    @scottrussell6717 ปีที่แล้ว +2

    You are very correct.. the 1s you showed are bottom of the line box stores.... they are are all made by mtd... I was a master small engine mechanic with my own shop... I mainly did 2 strikers..also a chainsaw race builder... didn't take long to figure most people bought junk... I didn't want to get married several times a day that's why I stayed with 2 strokers...great job sir

  • @mikefruge8589
    @mikefruge8589 ปีที่แล้ว +4

    I have encountered that starting problem with a couple of mowers I had in the past. The last one was a new Cub Cadet with a Kohler twin cylinder. Now I understand what was happening. BTW, the engine went out after about 1 year. Fortunately, the local box store, not Lowes or Home Depot, stood behind their sales and gave me my money back. The Husqvarna with the Kawasaki V-Twin has done well over this first year. No more Cub Cadet or Kohler engines for me. They do not honor their warranties.

    • @billmalec
      @billmalec ปีที่แล้ว

      Usually that was the starter. They spec an updated one for them now. I have a 15 year old Kohler Command engine on a Cub 2554. Zero problems other than just replacing the main seals last spring. Fairly easy job. Just now ordered a voltage regulator for it. That's it. The Kohler Courage engine had it's share of problems however. Apples and oranges. Someone GAVE me a JD with the water-cooled Kawasaki. Oh gees... Head gaskets blown, water pump leaking, this, that, the other thing. Why in the world complicate things with water cooling on an engine that doesn't need it?

    • @kurtneumann3164
      @kurtneumann3164 ปีที่แล้ว +1

      Love my husqvarna z54.2900.00 3 years ago. 23 hp kawasaki. Easy to maintain

    • @robertculpepper761
      @robertculpepper761 ปีที่แล้ว

      Just bought one. The 10 year old jphn deere motor locked up. Trying the cub cadet. With a knoler engine on it brand new

    • @southerntrendkiller2632
      @southerntrendkiller2632 ปีที่แล้ว

      Kohler usually doesn’t have to warranty there engines, because they usually make it years out of warranty before they ever present a problem. I bought my wife a cub cadet xt1 lt46 brand new in 2015. It’s had a deck and drive belt replaced once, and regular services every year, and runs perfectly with 351 hours. I bought myself a bad boy zt elite60 with a kohler, because I trust them to run and get the job done.

    • @mattpryor-c2v
      @mattpryor-c2v ปีที่แล้ว +1

      Kawasaki Engines all day long!! :)

  • @paulmoldenschardt2728
    @paulmoldenschardt2728 ปีที่แล้ว +1

    I. bought a 1984 782 d diesel cub cadette it is one of the best mowers out here

  • @mattparker8323
    @mattparker8323 ปีที่แล้ว +6

    I’ve had great experience with my 335e so far. Tiny little mower that’s great for small yards that Commercial mowers just won’t fit.THAT BEING SAID mine was assembled at the Deere Dealership meaning someone who knows half a fart put it together. I hear that if you buy them at big box stores. They are assembled in house. Meaning the kid making 16 an hour at Home Depot or Lowe’s is probably throwing it together. Mine has over 400 hours runs strong. And I mean you get what you pay for. If you want a ten year mower you gotta pay ten year price 2500-3k out the door for a zero turn in general is a steel. Walker mowers are 20k out the door no attachments it’s all about the way you look at it

    • @Mechanical_Mind
      @Mechanical_Mind  ปีที่แล้ว

      Thanks for the comment Matt. I see a bunch of guys trying to use the 335 beyond what it was built for because most of my customers are commercial landscapers. They abuse and neglect their equipment. Im glad you mentioned the Dealership vs Hardware store mowers. I need to do a video on that topic. Thanks for watching! 🍻