*I just opened up mine like you did and packed the bearing with grease, re-tightend everything back real tight and now the forks are stiff with no play and no more annoying squeaking or creaking. Before my handle bars had play when you push on them or hit the front brakes and the bike squeaked when riding like DeeBo's bike from the movie Friday.Thanks man.*
The center bolt - is the preload to the headset - you tighten that first to put a load on the headset bearings. When you have a good tension/load, then you tighten the pinch bolts. Same technique for regular headsets, same for "hollowtech cranks".
Thanks for the great video which is very well produced and edited. My handlepost is similar to the one you demonstrated in the video. It folds to the right side. Can I make it fold to the left side instead?
A shorter handlebar post is hard for my elbows, they sore even on short trips and this is due to the vibration of the bike on the road. A longer one will give me an opportunity to bend my elbows, so they'll absorb the shock, resulting to a more comfortable ride.
How do you stop the creaking sounds from the handlepost and handlebar? I have sprayed WD40 at various places but does not seem to work. I think when I brought to the retailer, they did remove the handlepost to apply grease. Could creaking from from the fork? Do I need to remove the fork to grease it before putting it back into the frame?
Hi i want to change my handle post to achieve the up right positioning. In my gust 16 inch can i ask wherw can i find and what are the things that i need to consider too? Thnk u
Hi, there is a spring lever that u need to push to lock the handle bar to upright. It has snapped. There is no spring force. Any idea where to buy or how to replace it?
Hi! Thx for the informative Video! I have the Problem with my Dahon Handlepost doing "cracking" sounds. In the end of your Video you mention some better tuning handlepost from fnhon. But I couldn't find anything. Do you have link or sth.? Thx a lot!
Yes Fnhon does have a 3D construction handlepost, but not widely available. If you can buy from taobao.com, here's the link item.taobao.com/item.htm?spm=a230r.1.14.31.37b32be0WHgspw&id=549455542398&ns=1&abbucket=17#detail Do note that even with that your handlepost might creak. You still need to maintain the joint regularly (I do it monthly) and also not to put up too much load when riding.
Hmmmmm, havent heard about this brand. Better if you open up to know what type of handlepost require. If it's too complicated, i suggest you to visit your local bike shop yea
Love your vids! One question, my dahon d8 launch handle post folds inwards (in between the wheels when folded), and it always blocks the magnets - is there any way to turn/ adjust the handlepost? Or are they always in the fixed position? Or if i need to buy a new one how do I know if they’re folding left/right?
Is yo handlepost telescopic version? Might need to lower down/ raise up to have more clearance. To change the fold direction you will have to change the handlepost. Usually the seller will stated in description that fold left or right
hello, can I ask how come your fork and chain stay doesn't have the protruding threads used for v brakes? looks so much neater when installed with caliper brakes.
Hello, my frame is a caliper brake version which only out in market for a short while. It get updated to disk brake after that so there's no V brake mounting point on the fork and also chainstay
I see people changing to the curve post, what are the benefits beside visual? I realize too that the curve post it's folding outward the right instead of the original stem. How does it affect the fold?
I bought a bicycle. crius 9v minivello To disassemble the folding handlepost, I must Loosen screws. Which one first? Side screw first right? And to assemble the handlepost, I must tighten the screw top cap first. Am I right?
Hello, can share where u buy this brown saddle? I want it for my fnhon blast, also matching brown handle if you have too. Thanks in advance! Great channel
May i know is there any specific diameter of the handlebar if i were to change? Was thinking to upgrade to mtb handlebar which comes in 35mm and 31.8mm.
Hi, it should be commonly available online or bike shop as the clamp size are not something special. Handlebar clamp size is 25.4mm and seatpost is 33.9mm
Hmmm it shouldn’t be wobble. Check if the M10 bolt is tight enough and also the clamp is not loosen up. If you can’t find the problem, maybe visit your local bike shop
I'm here for the knowledge only but as the steps shown here Heng forgot to remind us that the functions of each bolts to connect the entire handle post to the fork. The small bolt (m5 I think) act as the guide for the m10. The small bolt need to be tighten to guide for the m10 to get the m10 tight enough to hold the handle post. Then, retighten the small bolt to make sure there's no play. Try these steps ya buddy. Maybe Heng could provide us with some proper torque tighten numbers as well.
Make sure it's tighten but not over and also do apply grease on every threading. This should reduce the chance of creaking. Also you will need to maintain regularly.
Sorry bro, but the correct sequence is to loosen the size 6 side nut then loosen the size 10 big nut. When install back, should be tighten the size 10 big nut, then only fully tighten the size 6 side nut.
*I just opened up mine like you did and packed the bearing with grease, re-tightend everything back real tight and now the forks are stiff with no play and no more annoying squeaking or creaking. Before my handle bars had play when you push on them or hit the front brakes and the bike squeaked when riding like DeeBo's bike from the movie Friday.Thanks man.*
Glad it help! remember to service from time to time!
The center bolt - is the preload to the headset - you tighten that first to put a load on the headset bearings. When you have a good tension/load, then you tighten the pinch bolts. Same technique for regular headsets, same for "hollowtech cranks".
Yeapp. Thanks for comment
Thanks for the very well put lesson!
good advice need to change my handle post the stock on my folding bike is awful.. though bought it secondhand
Thanks for the great video which is very well produced and edited. My handlepost is similar to the one you demonstrated in the video. It folds to the right side. Can I make it fold to the left side instead?
Support support !
I really like those chocolate and black Schwalbe tires you have in that bike. What model are they?
Hi,are all folding bike bottom bracket in size of BC 1.37X24T.Tks!
Thanks for sharing!
Thanks for watching!
If i jst wanna adjust the alignment coz its not straight, do i need to loosen the big ellenkey bolt?
A shorter handlebar post is hard for my elbows, they sore even on short trips and this is due to the vibration of the bike on the road. A longer one will give me an opportunity to bend my elbows, so they'll absorb the shock, resulting to a more comfortable ride.
我有一台dahon k3 plus原装handlepost感觉很矮打算换掉，要换多少cm比较舒服？我身高170
My folding bike has a quill type connection to the fork. I would like to upgrade my steel handle post to aluminium. Is that possible?
Do you know for certain, with folding handlebars, if it matters if the stem on the forks are threaded or not ? Mine is an ebike if that matters...
I want to exchange the handlebars from one bike to the other bike. How do I know if they will fit ?
How do you stop the creaking sounds from the handlepost and handlebar? I have sprayed WD40 at various places but does not seem to work. I think when I brought to the retailer, they did remove the handlepost to apply grease. Could creaking from from the fork? Do I need to remove the fork to grease it before putting it back into the frame?
WD-40 work as a degreaser instead of lubricant in this case. I will suggest you to open up and use grease instead of WD 40.
How do I know what handlepost is a polygon urbano is?
Hi i want to change my handle post to achieve the up right positioning. In my gust 16 inch can i ask wherw can i find and what are the things that i need to consider too? Thnk u
Hi, you can try to change your handlebar to m bar instead of straight without changing your handlepost
Is it possible to install M type handlebar into the fnhon gust for more upright position
Hi, there is a spring lever that u need to push to lock the handle bar to upright. It has snapped. There is no spring force. Any idea where to buy or how to replace it?
You can try to visit your local bike shop or online shopping platform
Hi! Thx for the informative Video! I have the Problem with my Dahon Handlepost doing "cracking" sounds. In the end of your Video you mention some better tuning handlepost from fnhon. But I couldn't find anything. Do you have link or sth.? Thx a lot!
Yes Fnhon does have a 3D construction handlepost, but not widely available.
If you can buy from taobao.com, here's the link
item.taobao.com/item.htm?spm=a230r.1.14.31.37b32be0WHgspw&id=549455542398&ns=1&abbucket=17#detail
Do note that even with that your handlepost might creak. You still need to maintain the joint regularly (I do it monthly) and also not to put up too much load when riding.
hi -Have you ever heard OXEA folding bike, Mine handlepost patah but i dunno which type of handlepost to buy for replacement
Hmmmmm, havent heard about this brand. Better if you open up to know what type of handlepost require. If it's too complicated, i suggest you to visit your local bike shop yea
Love your vids! One question, my dahon d8 launch handle post folds inwards (in between the wheels when folded), and it always blocks the magnets - is there any way to turn/ adjust the handlepost? Or are they always in the fixed position? Or if i need to buy a new one how do I know if they’re folding left/right?
Your handle post must me change when buying the new handle post must try it on the bike then you will know if it goes left or right
Is yo handlepost telescopic version? Might need to lower down/ raise up to have more clearance.
To change the fold direction you will have to change the handlepost. Usually the seller will stated in description that fold left or right
hito x6 can change the handle post ??
hello, can I ask how come your fork and chain stay doesn't have the protruding threads used for v brakes? looks so much neater when installed with caliper brakes.
Hello, my frame is a caliper brake version which only out in market for a short while. It get updated to disk brake after that so there's no V brake mounting point on the fork and also chainstay
@@HengChooChian i see, thanks for the info!
Hi is there a diff in installation where I saw some with 2 bolt, some with 1 bolt below
The 2 bolts have a better stiffness.
Hi bro, possible to use 3d tern post on other bike like dahon?
Not sure the steerer tube need to be longer or not.
It won’t be a plug and play installation as the mounting system is different. It’s possible if you are handy enough to tinkering.
I see people changing to the curve post, what are the benefits beside visual? I realize too that the curve post it's folding outward the right instead of the original stem. How does it affect the fold?
That curve post will help for people who are taller and need a longer reach.
What kick stand do you use?
Nice Bro, ride safe🤜🤛
You too!
I bought a bicycle. crius 9v minivello
To disassemble the folding handlepost,
I must Loosen screws. Which one first?
Side screw first right?
And to assemble the handlepost, I must tighten the screw top cap first. Am I right?
Hi, yes side screw first and then only the top screw
@@HengChooChian to put them together
Top screw first and then side screw right?
Hello, can share where u buy this brown saddle? I want it for my fnhon blast, also matching brown handle if you have too. Thanks in advance! Great channel
Hello, thanks for reaching out. That’s B17 from brooks. It’s a leather saddle so require some maintenance compare to usual saddle.
As for grip, brooks do have some matching leather grip as well
Sweet. Thanks for sharing. 😊
Plan to upgrade curves type, any grease need to apply when change ?
yeapp, for every bolt you will need to apply grease to make sure cold weld doesnt happen
hi where to buy the front bike light?
Hi, I order from China.
May i know is there any specific diameter of the handlebar if i were to change?
Was thinking to upgrade to mtb handlebar which comes in 35mm and 31.8mm.
Usually folding bike handle bar are 25.4 instead of 31.8. You might need to change your handle post to T post and a stem to acoomodate 31.8mm
@@HengChooChian Thank u for the reoly,appreciate it
Hi. Do you know where can i buy fnhon handle bar and setpost?
Hi, it should be commonly available online or bike shop as the clamp size are not something special.
Handlebar clamp size is 25.4mm and seatpost is 33.9mm
@@HengChooChianthank you.
What type of frame ur using ? Fnhon gust ?
Yeap... that's a fnhon gust
What’s kind of Garmin Mount you using now ?
I’m using a generic aluminium mount that come with a gopro mount underneath.
After changing to a longer curve handlepost, I find it a bit wobbly, front and back, is this normal? How to fix this issue? Thanks
Hmmm it shouldn’t be wobble. Check if the M10 bolt is tight enough and also the clamp is not loosen up. If you can’t find the problem, maybe visit your local bike shop
I'm here for the knowledge only but as the steps shown here Heng forgot to remind us that the functions of each bolts to connect the entire handle post to the fork.
The small bolt (m5 I think) act as the guide for the m10. The small bolt need to be tighten to guide for the m10 to get the m10 tight enough to hold the handle post. Then, retighten the small bolt to make sure there's no play. Try these steps ya buddy.
Maybe Heng could provide us with some proper torque tighten numbers as well.
I am from Korea. Where are You from? Crius is well known? Like dohon newbirdy tern
Im from Malaysia :) Cruius is a relatively new brand compare to dahon, birdy or tern but it's a reputable brand
i have removed the nut in my folding bike but i cant seem to remove it. its like stuck. has rattling nose when riding\
Heyyy maybe you need to get help from your local bike shop yea
Handlepost model aleoca tlc ada jual spepart tak?
Sorry I'm not very sure about that....
Why did I wait so long
Do you know how to solve handlepost noise
Make sure it's tighten but not over and also do apply grease on every threading. This should reduce the chance of creaking. Also you will need to maintain regularly.
can change to inner fold? fold in between frame
Yeapp, just look for the correct size and mounting system will do
And how are you gonna lower that?
This is a fixed handlepost so it’s not possible to do that. There’s a telescopic version which you can adjust accordingly
@@HengChooChian oh my bad
Is your handle post considered as right or left fold?
Mine are right fold. Or some call it out fold.
Brand apa bos handle post tu?
Fnhon original
Jenis apa basikal tu boss
Ni Fnhon Gust
Sorry bro, but the correct sequence is to loosen the size 6 side nut then loosen the size 10 big nut. When install back, should be tighten the size 10 big nut, then only fully tighten the size 6 side nut.
Thank you for pointing out! I just realize I didnt mention in the video. Will add hat in the description! 🙏
May i know what is the length of your handle post?
Hi, my handlepost is 35cm
Your hands are to busy they are distracting.
😅🤷🏿♂️
Can you speak Chinese?
Yes I can. If you need help in mandarin do dm me on Instagram 😁
Never reply at at all
😅