Bro your better off adding Co2 shell or work around those * everything looks to work correct but you just need something more solid to hit the primer better * this would be worth selling in airsoft community
Could you drop a tutorial for how you made your HHO machine in specific or atleast some concentration numbers or something so I can get the closest possible to yours.
I don't know how well it would work as an actual military design. At least without powered armor and improvements to ballistic technology. Even then I don't think a 40mm grenade would be practical. I could see wrist-mounted 20mm grenade launchers possibly working, however.
@@toradrow777wrist mounted GL is a wrist mounted GL. I sometimes use the term "If it's stupid and it works, it works." But yeah, 20mm should be fine, but it should be the minimum caliber.
If it were a real 40mm grenade, absolutely! You could feasibly do this with 20mm grenades though, and for keks a double barrel 20 gauge would even be small enough to open carry
@@belthesheep3550 I've fired 40mm from a M16 mounted M203, it does kick some but I've felt worse from bolt actions and shotguns. I bet you could safely wristfire one assuming the barrel extended past the hand (he cut his pretty close in the vid) but just cuz you can do a thing doesn't mean you should, aside from an obvious cool factor this has no real world application.
@@chill_will9816 See with underbarrel mounted grenade launchers (or even the standalone m203) you can control the recoil much more easily since it is braced against your shoulder and you have your other arm to hold onto the front of the gun with, whereas when wrist mounted you have only the one arm, no way to brace against anything and even if you tried using your other hand there's nothing to really hold onto. Imagine the kick from that m203 but you're holding the m16 like a pistol, it'd be a lot more uncomfortable.
@@belthesheep3550 Yeah, like I said it didn't kick hard but it did want to pull right (I'm right handed). It's moving a lot of mass but with a delayed high-low pressure system within the shell casing itself. It would be a right handful to shoot and terribly inaccurate at a range that would actually allow rounds to arm the self. A big ass 40mm shotgun round would probably wreck though
@@Nasir-uh1ocAmerica is literally the worst place you could be in if it's a nuclear apocalypse. We'd be nuked into oblivion. No where would be safe except maybe some hills in Montana.
At this rate I expect the next videos to be a 3D printed GMG and Machine Gun with the finale of you 3D Printing a ICBM. Great video as always, loved your content ever since for your intricacy of getting around the engineering (And legal) limits of what you're able to do with a printer and spicy water.
The idea for this popped into my head a second ago and now i'm being recommended this work of art. Algorithms are scary, but man am i glad i got to see this!
I'm in awe at how clean and beautifuly precise all those printed components are. (I haven't paid attention to 3D printing in a while, so I don't know if this is "normal" now, but it did NOT look like this last time I checked. 🤷♂️)
I remember playing this game [PROTOTYPE] where the second boss, Blackwatch Captain Cross, uses a forearm mounted custom grenade launcher, the design and how it worked, was beautiful... Tysm for bringing it to reality
im surprised that this concept could actually work as real weapons, in terms of phisycs and being innovative and practical, i can call this high tech grade weapons concepts, at a genius
@@vast9467 Now all he has to do to improve upon it is find a better way to trigger it. A button on the back of it would require you to drop your gun to fire the grenade launcher, which in the heat of battle would not be very efficient. Maybe something like a glove that when given a specific hand gesture triggers it to go off?
I'm in love with this, I built something similar but much dumber when I was younger. Might just get back into making airsoft gear for the fun of it. Consider swapping your use of HHO with a small amount of nitrocellulose, its should work with your igniter, offers about twice the velocity and has a long shelf life. If you want to go to purely a percussion setup, small pistol primers should give just a bit more push than your current setup.
What printer or post processing do you use? While holding a lighter to the surface of prints can certainly smooth it out a little, the finish on your parts is insane, it looks injection molded sometimes
I love your builds so much, wish to see more from ya in the future. (WE GOTTA GIVE THIS GUY THE BEST SLO-MO CAMERA FOR WHEN HE SHOOTS HIS SELF DEFENSE KNICK KNACKS)
You hate to see someone living your dreams but also I like to see it because it means I wasn’t very silly as a child trying to figure out how to make these kinds of things. Keep on tinkering 🤩
This is reminding me of the WAR suits from xcom 2. You could equip exoskeletons that have a wrist mounted heavy weapon launcher. Stuff like flamethrowers, rockets, flettette launchers, even a smart remote guided bomb that can go around corners and through doors. It’s OP as all hell
Reminds me of the black ops 2 grenade launcher in the campaign. The part of the campaign set in 2025 had these wrist mounted frag devices that armed the fuse of a grenade and acted like a sling that gave greater force then just traditionally throwing them. As a kid that piece of tech FASCINATED me.
Ok so i need the file for this for sure. What a cool idea! If i were any type of tech savy id probably set mine up on disposable co2 carts and go with the hornets nest style grenade. Print two and go with a side wrist mount
I like it a lot, very cool! One improvement I can see is possibly an adjustable part that extends to the palm with a button on the thumb side, so that way you can fire it one-handed? Not super necessary, but would feel extremely cool to fire it one-handed.
Check my Patreon! : www.patreon.com/Flasutie
Where do you get the piezo igniters from? Is there somewhere I can get them on their own or do I have to buy a lighter?
Bro your better off adding Co2 shell or work around those * everything looks to work correct but you just need something more solid to hit the primer better * this would be worth selling in airsoft community
Ты русский?
Only issue with this grenade is that it ejects shrapnel towards the shooter
Could you drop a tutorial for how you made your HHO machine in specific or atleast some concentration numbers or something so I can get the closest possible to yours.
I love the calm jazz in the background as a dude assembles a 40mm wrist bound grenade launcher
the best kind of music for this sort of thing imo
it fits
I like how the power supply switch is backwards, too
Every arbiter main in decaying winter: wait it was invented 7 years ago? And you don't need to parry it?
It’s not a war crime if there is this kind of background music.
*WATCH THOSE WRIST ROCKETS*
*AUUUUGGGGH*
Aaauuggggghhhh😩😩😩
🗣️ 💥👤💥🚀 🤖
Just like the simulations!
We've lost a command post, the Republic can't spare anymore reinforcements!.
"There is no safety, it's cumbersome and inconvenient"
well I know who I'm subbing too now.
YES
the only safety is not loading in the round
I'll never understand this childish mentality of disliking safeties and gun safety in general.
@@TheFirstCurse1 🤓
@@SniperElitist1 "I have no argument so I'm just going to lazily put his nerd emoji"
This is one of the most underrated channels of all time.
yea
true
yeah
yeah bro
fr fr no cap bro this is my favorite 3d printing channels and has inspired a few of my projects.
3D printed nuclear bomb when?
we never know
Were going to need a lot of HHO for that one!
@@chugachuga9242 Nah, we gettin on that 2H(deuterium) with this one
Shadow wizard printing gang, we love casting spells
if you want i can make a tutorial (go fund me required)
We winnin' the nerf war w/ this one
MMMMMHHHHHHHH
I love how this guy is just like "here you go, make your own 3d printed stinger grenades"
It's great!
🤣
🖍️
@@spiffymagicman7284 Are you calling us Crayon eaters? Thanks!
In a few years this guy will be manufacturing these things for the military
I don't know how well it would work as an actual military design. At least without powered armor and improvements to ballistic technology. Even then I don't think a 40mm grenade would be practical. I could see wrist-mounted 20mm grenade launchers possibly working, however.
@@toradrow777wrist mounted GL is a wrist mounted GL. I sometimes use the term "If it's stupid and it works, it works." But yeah, 20mm should be fine, but it should be the minimum caliber.
He probably already is😂👍
@@toradrow777 What would work is a hidden shotgun, slim enough to be used as a concealed carry.
@@leaveeeevee5762 Oh, easily.
I saw this in my feed and immediately said “that would break several bones. Gonna watch that” and now I will
If it were a real 40mm grenade, absolutely! You could feasibly do this with 20mm grenades though, and for keks a double barrel 20 gauge would even be small enough to open carry
@@belthesheep3550 Double barrel 20mm? Perfect for buckshot.
@@belthesheep3550 I've fired 40mm from a M16 mounted M203, it does kick some but I've felt worse from bolt actions and shotguns. I bet you could safely wristfire one assuming the barrel extended past the hand (he cut his pretty close in the vid) but just cuz you can do a thing doesn't mean you should, aside from an obvious cool factor this has no real world application.
@@chill_will9816 See with underbarrel mounted grenade launchers (or even the standalone m203) you can control the recoil much more easily since it is braced against your shoulder and you have your other arm to hold onto the front of the gun with, whereas when wrist mounted you have only the one arm, no way to brace against anything and even if you tried using your other hand there's nothing to really hold onto. Imagine the kick from that m203 but you're holding the m16 like a pistol, it'd be a lot more uncomfortable.
@@belthesheep3550 Yeah, like I said it didn't kick hard but it did want to pull right (I'm right handed). It's moving a lot of mass but with a delayed high-low pressure system within the shell casing itself. It would be a right handful to shoot and terribly inaccurate at a range that would actually allow rounds to arm the self. A big ass 40mm shotgun round would probably wreck though
The first shot scared the hell out of me. Fantastic creation
When the apocalypse comes and we revert back to some Mad Max style of government.
Do you wanna come and be my weapon-tinkerer in my warlord-kingdom?
The question is, do you want to be his chef or joker?
He's not bowing to anyone
If the apocalypse happens America is safe zone fr fr
@@Nasir-uh1ocAmerica is literally the worst place you could be in if it's a nuclear apocalypse. We'd be nuked into oblivion. No where would be safe except maybe some hills in Montana.
"Revert back"? You know something the rest of us don't?
@setyourhandlex hah, look at this dumbass, hasn't even discovered the pre-civilization post-civilization kingdom wars yet
With how creative this guy is, it feels like I'll go away for 2 weeks, and when I come back, he'll have an entire mech suit.
Big Hero 6 moment
@@six_buck_dlcWE COULD BE IMMORTA-
I am gonna bet on one thing, Flasutie, you are going to become a Military Contractor in the future!
Honestly, this channel probably would be enough to get his foot in the door for an engineering job at one of those big arms manufacturers.
❤d❤❤ar❤c cc e asD s😂ai @@Colddirector
Ee
*Military Industrial Complex entered chat*
*3000 Man-Portable Grenade Launchers of MIC*
The speed with which he is increasingly improving his personal armament is frightening
D:
When a mosquito lands on your balls you undesrtand that violence is not always the answer
-sun tzu: the art of war thunder
ATTACK THE D POINT
Well buddy, I’m a slow learner
THOOMP!
@@memesintensifies8013on me!
my boy thats what they invented morphine is for, so you can make violence always be the answer
Attack the A point! Never! Attack hostile troops! Negative! Attack the D point! Yes!
"what makes me a good demoman?" -this guy, probably.
"If I were a bad Demoman, I WOULDN'T BE SITTIN HERE DISSCUSSING WITH YA NOW WOULD I!?"
@@matanuigaming2556 "one crossed wire, one wayward pinch of potassium chlorate, one ERRANT TWITCH,"
@@claudedebussyrealAND *KABLOOEY*
Impact grenades, 30mm homemade howitzer, 25mm revolver, now 40mm wrist mounted grenade launcher.
What's next, 35mm double barrel sawed-off shotgun? A 20mm pistol?
I loved the little pop up of "this was my favorite moment" with the first shot
Bro escaped Cyberpunk 2077
I was searching for this comment. I have nothing else to say.
🧌🧌🧌
Now we know where Maine got his first set from.
now it's making more sense how guts had that installment in his prosthetic arm
that opening reminds me of a double barreled shotgun. maybe you could do it next. awesome designs.
“There is no safety. It’s cumbersome and inconvenient”. is such a chilling line and I don’t know why lmao
At this rate I expect the next videos to be a 3D printed GMG and Machine Gun with the finale of you 3D Printing a ICBM. Great video as always, loved your content ever since for your intricacy of getting around the engineering (And legal) limits of what you're able to do with a printer and spicy water.
You can feel how casual it is when the caption says “it only travels 6x faster than the speed of sound.”
I wonder how much payload these could carry..
20g of TNT
This is awesome! You made both a grenade launcher and an explosion powered shotgun with basically the same design!
What shotgun isnt explosion powered?
@@obnoxiouspedant correction, what GUN isn't explosion powered (aside from a railgun I guess)
@@jmanredbull1 uhhhh a nerf gun SILLY BILLY
The idea for this popped into my head a second ago and now i'm being recommended this work of art. Algorithms are scary, but man am i glad i got to see this!
What printer is that? The quality of the threads is amazing
Indeed. From what I hear, TPU is also a nightmare to print, but these parts look fantastic. What's your secret, @Flasutie ?
Probably x1c
Bootleg 320 😂
Awesome stuff. I went through the ropes as a joe in the Army and being the grenadier is always quite fun, especially at the range.
Bootleg? Naw, that ain't a bootleg. That's a wrist mounted grenade launcher
@@ZackarySchejbalCODBO2RGM2Do you know what bootleg means in the figurative sense?
Every single invention brings us closer to a full 3-D printed Space Marine's arsenal.
Wrist grenades are more of a Custodes thing though...
Thank you brother, another concept for the archive for future tactical developments
7:04
THE VIOLENT EXPLOSION GENUINELY MADE ME DO A “HUH HUH”
My favorite part is that for the fragmentation one the shaped charge is pointed back at the shooter, ensuring maximum hit chance
This is unironically something you could see in a video game ether as an Easter egg or an actual tech-tree unlockable
Edit: thank you for the likes!
Yes
if i were to make a game i would either have this or a wrist mounted flamethrower as a unique weapon
@@tairhan52 yeah, looks something straight out of TF2
Bootleg black ops 2 hidden weapon pickup.
I immediately thought of the projectile launch augmentation from cyberpunk
I'm in awe at how clean and beautifuly precise all those printed components are.
(I haven't paid attention to 3D printing in a while, so I don't know if this is "normal" now, but it did NOT look like this last time I checked. 🤷♂️)
I 3d print mechanical parts, and I think I need to get my printer checked or something, because my prints are all layer lines
This is great! That said, if your shrapnel fires back at you it’s kind of a problem lol
Seems like a materials and target problem.
this test probably should have been performed with a catch box, or at longer range.
may this man never discover the power of metal filament
You are criminally underrated
Babe wake up Flasutie uploaded more weaponary
This video is full of cool decisions but designing those larger "anti roll" pellets to use in place of airsoft for easier cleanup is GENIUS
"HHO gas is *only* 6x the speed of sound"
I love how most of your tools are 3d printed as well
The goverment should watch this person.
they killed shinzo abe with this
oh they already are
No we should normalize this
I remember playing this game [PROTOTYPE] where the second boss, Blackwatch Captain Cross, uses a forearm mounted custom grenade launcher, the design and how it worked, was beautiful... Tysm for bringing it to reality
im surprised that this concept could actually work as real weapons, in terms of phisycs and being innovative and practical, i can call this high tech grade weapons concepts, at a genius
Grenade launchers are real already
he’s literally making real designs work to his criteria, such as not blowing himself up or making it wrist mounted what surprise
@@vast9467 Now all he has to do to improve upon it is find a better way to trigger it. A button on the back of it would require you to drop your gun to fire the grenade launcher, which in the heat of battle would not be very efficient. Maybe something like a glove that when given a specific hand gesture triggers it to go off?
@@jaihadgeppo150 And how many can you wear on your wrist....?
I'm in love with this, I built something similar but much dumber when I was younger. Might just get back into making airsoft gear for the fun of it. Consider swapping your use of HHO with a small amount of nitrocellulose, its should work with your igniter, offers about twice the velocity and has a long shelf life. If you want to go to purely a percussion setup, small pistol primers should give just a bit more push than your current setup.
What printer or post processing do you use? While holding a lighter to the surface of prints can certainly smooth it out a little, the finish on your parts is insane, it looks injection molded sometimes
One of the best channels out there
babe wake up, flaustie just uploaded
Everyday this guy posts. I get realize 3d printing is way better than i thought it was
Hey Flasutie, Is it ok if I make videos kinda like yours like ballistics? You're an inspiration for me!
I love your builds so much, wish to see more from ya in the future. (WE GOTTA GIVE THIS GUY THE BEST SLO-MO CAMERA FOR WHEN HE SHOOTS HIS SELF DEFENSE KNICK KNACKS)
I love your video 💛
bro bouta punch the shell in decaying winter 🔥
Arb mains eatin good tonite 🔥
Bro became megatron
No he did not. If he wanted to become Megatron, he would've made an arm mounted javelin missile launcher, not a wrist mounted grenade launcher
I lov the fact that bro is building a fricking WRIST ROCKET LAINCHER in a chill melow vid
Why must you post this at bedtime? 00:37 Vancouver BC time ☹️☹️ BUT NEW VIDEO YAYYYYY😂😂😂😂
One of the most Mandalorian kinda videos I've ever seen in my life
And I love it
Spider-Man: Going to Ukraine
Now an under-barrel attachment for the 50mm recoilless launcher. For that quick follow-up shot.
as a gunsmith, you dude are a fucking genius, i love your designs and ingenuity, keep up the awesome work
The old joke of a 20mm grenade inside a flare launcher was the old wrist breaker, but this is the truest wrist breaker there is now.
POCKET MORTAR.
Yeah, I’d say that’s pretty normal. Just an ordinary thing people have.
That fired with a surprising amount of force
My guy, did you just teach 171K people how to build a bomb?
We went from funny water based grenades to wrist mounted weaponry, eager to see what he makes next (my personal bet is a scale artillery emplacement).
Can we all agree that this genius should work for the military?
this reminds me about the wrist mounted guns deadshot uses in the arkham trilogy. nice job.
these 3D prints are so clean.
You hate to see someone living your dreams but also I like to see it because it means I wasn’t very silly as a child trying to figure out how to make these kinds of things. Keep on tinkering 🤩
His hand is technically down range
"Honey, the neighbor is printing grenade-launchers again!"
I will start fearing for my life if i see this man in my vicinity
Man. The stuff we all wish we had as kids.
This is reminding me of the WAR suits from xcom 2. You could equip exoskeletons that have a wrist mounted heavy weapon launcher. Stuff like flamethrowers, rockets, flettette launchers, even a smart remote guided bomb that can go around corners and through doors. It’s OP as all hell
This is insane. The coolest thing I've ever seen.
Man what the hell took so long for more content LETS GOO WRIST 40 MIKE MIKE
This channel is incredibly underrated!
Honsly the coolest Chanel I have seen in a long time
Honestly, you are the only channel of this type I know on TH-cam and I really admire the stuff you create, amazing, keep it up!
It reminds me of a pit boy from fallout lol..... fantastic engineering.....nice job 👍
This is an amazing project here.
Thats fricken neat sounds like it has some real damn power behind it to
Reminds me of the black ops 2 grenade launcher in the campaign. The part of the campaign set in 2025 had these wrist mounted frag devices that armed the fuse of a grenade and acted like a sling that gave greater force then just traditionally throwing them. As a kid that piece of tech FASCINATED me.
Wrist granade launcher like the Custodes terminators, super badass
if you plan on upgrading this weapon pls make the shells automatically jump out of the barrel when you open it it would be so cool 😃
Geez your one creative bastard lmao, this videos got me interested in making stuff again
Some of the most impressive things I’ve ever seen!!
Ok so i need the file for this for sure. What a cool idea! If i were any type of tech savy id probably set mine up on disposable co2 carts and go with the hornets nest style grenade. Print two and go with a side wrist mount
I like it a lot, very cool! One improvement I can see is possibly an adjustable part that extends to the palm with a button on the thumb side, so that way you can fire it one-handed? Not super necessary, but would feel extremely cool to fire it one-handed.
Dude the shrapnell pattern slo-mo 🤤
Bro is on every watchlist known to man
give this guy military grade equipment and he’s a man of war
Omg those rifling actually worked
This channel is going BIG places!!!!
Always a good day when you upload! Super super cool, only a little while longer till you've made your own Ironman suit 😉
Next thing you know this guy is creating handheld full auto HEAT launcher
Mans gonna be put on a list someday
" *Throughout 3D Printing and HH0 gas, I alone, am the weaponry one.* "