You will also need a pair of needle nose pliers and a flat screwdriver because the metal clips will usually stay in the dash and not on the trim piece.
I think you did a very good job at the narration and the synced manner in which you did things you kept all the pertinent information in line and in the video thank you very much you are more than helpful and that 50 to $100 can you believe those scumbags. Sons of guns I bet you that's why the one that's in my truck now doesn't work because it was put in there it was replacement and they didn't get that code very important thank you again
I put a replacement stereo in my truck today and notice it worked fine, the only difference with the two was the new stereo didn’t have “mp3” written on it the old one did, my battery died after 5 minutes of setting up which is a known issue and I think the battery is getting old , explain more about the codes
Thank you! When putting the bezel back on, do you install the metal clips on the bezel first and then press in the bezel, or do you leave the metal clips in place and press the tabs of the bezel into them? Thanks in advance.
You're welcome. It was quite a while since I recorded this video but I believe you should just leave the metal clips in place and press the tabs on the bezel into them
@@InaMopar The same thing happened to me. The only way I could get the bezel back on was to pull out all the metal clips, mount them on the bezel, then carefully align the bezel and push it in place.
Im tryna put in an after market radio(JVC kw-580BT) in my 08 f150. Have no clue what that smaller plug is(not the attenna) to find a harness adapter for said radio
You will also need a pair of needle nose pliers and a flat screwdriver because the metal clips will usually stay in the dash and not on the trim piece.
Thanks for the idea of tape on the paint scraper for a trim tool!
No worries :)
Good camera work!
Thanks!
I think you did a very good job at the narration and the synced manner in which you did things you kept all the pertinent information in line and in the video thank you very much you are more than helpful and that 50 to $100 can you believe those scumbags.
Sons of guns I bet you that's why the one that's in my truck now doesn't work because it was put in there it was replacement and they didn't get that code very important thank you again
Thank you for watching and for the comment. I'm glad you found my video helpful
I put a replacement stereo in my truck today and notice it worked fine, the only difference with the two was the new stereo didn’t have “mp3” written on it the old one did, my battery died after 5 minutes of setting up which is a known issue and I think the battery is getting old , explain more about the codes
Good information about the kit and harness. Thanks
Glad it was helpful!
Thank you. Your video was simple and to the point. Great info
Glad you enjoyed it!
Thank you! Very, very helpful!
You are welcome
Same install if the truck has a factory subwoofer and amplifier? Thanks
Great vid!
Hi, should be the same but you might have more connectors to disconnect behind the radio unit
Thank you! When putting the bezel back on, do you install the metal clips on the bezel first and then press in the bezel, or do you leave the metal clips in place and press the tabs of the bezel into them? Thanks in advance.
You're welcome. It was quite a while since I recorded this video but I believe you should just leave the metal clips in place and press the tabs on the bezel into them
How did you do it the bottom of mine won’t go back on the top and sides go fine but the bottom pushes in but comes out 😭
@@InaMopar The same thing happened to me. The only way I could get the bezel back on was to pull out all the metal clips, mount them on the bezel, then carefully align the bezel and push it in place.
Very good recomendecions. Gracias amigo 😅
You're very welcome :)
Im tryna put in an after market radio(JVC kw-580BT) in my 08 f150. Have no clue what that smaller plug is(not the attenna) to find a harness adapter for said radio
Thank you for this video
My pleasure
What does the small electrical connector do at coming into the rear of the radio?
Thats the attenna
Thx!!! Very nice!
No problem. Thanks for watching
Nice! Vey helpful!! Like!
Thank you! Cheers!
I took it out and put it back in now my truck wont turn over
Reattach the battery leads
Plastic BEZEL...!
05