I just did the Summit Racing one on my 2005 C6. I could instantly feel it being smoother. I drive my Corvette daily and it has 85K on it. Tax and all it was $980.
want to give you huge credit for this video! You nailed it spot on what needed to be done for my car and as a fairly new corvette owner it was a huge help. Thank you!
I once looked at a real nice 2001 C5 Convertible . Everything looked just right until I watched the motor running. The crank pulley was wobbling significantly. When I pointed this out to the owner - he looked at me with a strait face and said - there is nothing wrong with it according to Chevrolet. I told him he shouldn't be driving the car like it was. A month later he had put a TON of miles on it - I forgot the exact numbers but it went from like 89,000 to like 94,000 miles in just one month. I couldn't figure out how anybody could put that many miles on a car in so little time. Some people are just not good liars. Knowing how he blatantly lied about it - I passed on the car.
Just replaced the shifter cable in my 2006 C6, A6 with 73K miles on it. After the cable replacement a quick check under the hood revealed a slight wobble of the harmonic balancer. A quick call to my Chevy dealer of choice in Rio Vista, Ca. and they are saying about 6 hours of labor to replace the harmonic balancer. And part of the sales pitch for the new GM harmonic balancer was that they have seen trouble with after market harmonic balancers also. About $1350 or so to do the job. No new belts, no new seal, no new tensioners, the only thing new was the harmonic balancer. So as I drive the car very little in the winter I think when the weather gets a bit better next spring I will be replacing the harmonic balancer myself. I guess I will learn to cuss like a sailor.
Great video! The OEM balancer on my C6z broke off its center hub. I also replaced it with an ATI Super Damper and pinned it to the crank with an ARP crank bolt
Thanks for the information. I had a 2005 C6, with the Lingenfelter supercharger installed. At 23,000 miles, I replaced my 1st harmonic balancer. I used a factory replacement. It failed again in 4000 miles. The 2nd time I used the ATI balancer. All is well now. What is upsetting, is that GM has several service bulletins out on this problem, but they don't stand behind the repair.
I replaced mine on my 2007 in September 2024 having done the work myself at a friends garage that had a 2 post hoist. At 35,000 miles it had developed a significant wobble. I replaced the Dampener with one made by Dorman. Fit and finish of the unit is excellent.
Great Video, i have a 2007 and did all you did and the following as well...waterpump/thermostat and an ECP alluminum radiator. Not hard, just labor intensive. Car is super reliable now.
My harmonic balancer went out at 27,000 miles. Could not find a balancer anywhere so finally found a doorman brand. I replaced everything but tensioner mine was 875.00 total on 10/2/23. Saved the old one because I cant find them anywhere and going to take it to a machine shop to see if they can repair it. Good video, thanks Randy
Great video sir! I have used Masterworks for my '99 Coupe on few occasions, and have been completely satisfied every time. Their current labor price is now $135 hourly. Greetings from Shelby Twp.!
You are definitely a die hard Corvette guy and I love it. I have learned a lot of information from you about vets in my quest to buy my first Corvette. So far we are looking at buying a used 2007 or newer thanks to your TH-cam channel. And I believe congratulations are in order since I think you mentioned somewhere else that you just took possession of your brand-new 2023 vet. I love the way you’ve had Corvettes for so long.
I have replaced my harmonic twice. I think the first time it was Doran, the second time OEM. I saw another video that ranked the C6's and it said, i8f you want one go with the '2' engine. A GM engineer told this guy that the '2' was probably the best platform Chevy has ever made. He said you could turbo it, supercharge it, nothing seemed to phase it.I wish I knew that before I bought my car.
Summit Racing also makes a great balancer for around $200. I also used an upgraded ARP balancer bolt. Additionally, I purchased a pin kit & had the balancer drilled & pinned to the crankshaft, as the balancer spinning on the shaft can become a problem as well. Money well spent while you're already in there. Hope this helps.
I wanted to do the Summit Racing balancer...but the shop said it was on back order. And I wanted to get the car done while I was on a short vacation. I needed it fixed before I am back out on a race track in about 10 days. So I was OK with paying the extra $200 for the ATI...
dealer rates in South Florida are 220 per hour labor. thank you for the breakdown i think other then labor costs at today's rate you are right on the money. i was charged 2400 at the local dealer labor was 700 more then you estimated and parts could have been a little more expensive as well. i had no idea what a harmonic balancer was but heard a noise and noticed a belt wobble.
Thank you! A lot of videos out there on doing it yourself, but not many on having a shop do it for you, so this was helpful! Want to get a rough estimate for my c5
You did an excellent job putting this video together! This Friday, i will be buying a 2013 grand sport. Hopefully, the hb is good on this car! I didn't think of checking it while i looked the car over.
I changed my damper with an ATI unit, with an ARP bolt. I also replaced the front oil seal, all belts, hoses, and tensioner. It took all of six hours, dropping the engine cradle to remove the steering rack. The only thing that I would have done differently, is replace the plastic power steering pulley with a steel one.
I did that job myself. It was not as easy as some say. If you are not experienced with turning wrenches, don't do it. However I did succeed. I've put over 2500 mi since and it's working. 700 in labor . It's worth it. As long as they are good. Problems with other components may arise if not done carefully.
got mine done 2 weeks ago from a shop $400 labour you do not need to remove the rack there is a way to do it dropping the cradle takes about 2 hours with a hoist the shop quoted the 6 hour way and i asked them if they would mind watchin a video and they did and the car was dropped off at 7 am they started the job at 8 am and it was sitting outside done by 11 am c6 corvette
@@matiasespina1490 the video starts 3 or so min in just rewind it to the beginning 1500 bucks is crazy money removing the rack means alignment too more money dropping the cradle you dont need an alignment
I found a 2007 with 18k miles. Went to teat drive the car and noticed the wobbling HB. I told the GMC dealer they need to replace it or I will not buy the car. What do you think. I could also ask them to discount the car another $1600 and get it fixed. They will only use GM replacements.
Great video on this. Replacing the HB seems to be a given on the LS motors used in the Corvette. This why I am looking for a car this was already done on. Curious if the Camaro V8’s have same issue?
I currently came into ownership of a 2001 c5 convertible and I'm in the Toledo/Detroit area and I appreciate the info on the shop you used. My dad passed away from covid and he was doing some exhaust mods along with some upgrades and I was questioning what reputable shop to use. Thank you again, great video🤙
Your video of the balancer dancing around looks a lot like mine. 😮 I was planning to replace it anyway. At $1,500 rounded up, it’s almost a no brainer 🧠. What’s the benefits to the non OEM balancer? 😊😅
Great video! I took alot of screen shots! My 05 Vette has the wobble. I have a Fluidampr on the way, but I'm just curious. Did you stop driving it after noticing the wobble? I won't be able to get mine changed for a couple of weeks and still want to drive it. Nice and easy of course. Nothing over 3k RPM.
Well, just saved myself appr. $ 2000 CDN by DIY.. I watched many different vids on this before tackling the Job. Strangely , one part nobody ever mentions ,when I pulled the original Damper I found a shim which has a rubber piece on the circumference., it’s a $ 28 CDN part. It does help to cover the keyway all of the aftermarket Damper have instead of having to mess with ATV filling the Keyway.. My car is a ‘07 Z51 convertible , so I’d assume that “Shim “ will be found on all corresponding yrs C6’s.
So far, I haven't seen a wobble. I've been watching the weaknesses of the C5. I have a '99 convertible with 7700 miles. Great miles but age takes it's toll.
bought mine with 38k miles and it had the wobble then. finally replaced it at 60k this weekend for peace of mind. I bump the rev limiter time to time and always driving it hard too. you can probably wait a while, the car idles smoother now tho
I have a 2007 bought new, never raced, and has 33,127 miles as of today. Always dealer maintained. Would you recommend replacing the HB along with the other components as a preventive measure before failure symptoms? After having owned 5 Corvettes, this will be my last, and I plan on keeping it till I can no longer get in or out of it. We will be taking several trips up the coast this spring and summer, and don't want any on the road problems. Thanks
Hey I am looking to purchase a c6 ls2, current owner is getting hb done there was no noise but he caught the wobble. Would you advise to still buy it or just stay away from it? Thanks
Im getting a pulsating vibration at 74mph+ , could this be the culprit? Changed every chassis component known to man…tires..balance… vibration still there
I don't think so. But the nice thing about the HB, is it is easy to identify when it is failing. Start the car and take a close look at it. If it is wobbling, change it out. Vibration sounds like suspension, tires, wheels...
Six speed manual 2007 c6 41000 miles ,replaced with super damper and all the other components, had to buy 125 dollars in tools ,chevrolet dealer wanted 2700 to do job,took me all day to replace for first time 12 hours, love the performance of car but after seeing the possibility of having to replace any other part of car ,and the compacted engineering components IM GOING TO SALE IT AND BUY A BICYCLE, after working on my corvette you will cuss like a sailor
@@paulmoss7940 North NV. Getting quoted 1100 to do simple oem style balancer. Getting an ATI from summit along with accessories, tensioner, spark plugs. Haven't gotten a final bill yet but will be around 1600. Well worth it since I'm prepping the car for road racing.
@@FindtheRightRoad why not let the shop do the hard part, the harmonic balancer and you do the easier part the tensioners. That would save you a bit of money.
Don't understand the labor to replace the tensioners. Once the rack is out it's just a few bolts, zip, zip and they're off and then zip, zip, and the new ones are back on.
Does this happen to all LS engines, do they all have a similar design? I see the HB for the supercharged engines have a keyway a drift, on a standard LS can you machine a keyway while the engine is in the car and put in a key and drift to "beef it up?" I personally love the C-6 body style, I think it is the best looking Vette of all time. I really would like to buy one before they start appreciating out of sight. Then my commons sense and experience tells me to remember - GM products are junk and to stay away.......
I believe this was an issue with the LS2 and LS3 models (6th generation) primarily. I have no idea what you are talking about when you say "have a keyway a drift..." So I can't answer that. But I do not think GM products are junk. Our 2003 Corvette we bought brand new and put 120,000 miles on it with zero issues other than an alternator that went...
I wanted a $200 Summit HB, but they were out of stock and I was in a rush. I needed it done before I was headed out to a local race track for a track day...(which ended up getting cancelled)
Yup those c5 and c6s are money pits especially if you dont do the work yourself!........i brought a c5 convertible for 10k which is pretty cheap and the previous owner showed me 6k worth of reciepts which included the new balancer.....Now I have the car and i am getting codes and the traction control doesnt work, rear end is leaking, ac vent issues but i do much of the work myself!..........c5s and c6s are cool cars but they are junk, typical gm products!.......i dont care if i get heat for telling the truth!
@@leoclement3801 im in bc canada a place called fraser tech did it they quoted me 6 to 7 hoursthen i said would u mind watching a video if i came by they did and 400 got it done
$725 labour to replace a couple pulleys? Wow, you guys are suckers! That's an hour job including clean up and an oil change. The LS engine is the easiest engine in the world to work on.
@@FindtheRightRoad If you've never dropped the steering rack before I can see it taking 2-3 hours your first time. After 2 or 3 times it's just going through the motions and you'll have everything memorized. I can just about do a cam swap in 7 hours.
@@FindtheRightRoad Fair enough, but I still think that book time is too much. 6 hours plus another hour for tensioners is union time including lunch and coffee breaks. I suppose it keeps the shops in business but at your expense.
I’d like to see that on a 100k vehicle. That steering rack is not fun to pull. I’m at 6hours to pull it out by myself. Granted if I had a lift I could shave some time off. This is not an easy job.
@aikamatwal6333 - 4.4 hours on what exact engine, year, model? I could only see that if able to just loosen the rack and move it, not have to pull the radiator and fans . . . and of course having a quality puller / install tools. Not to mention having done it before on that exact model vehicle.
I will respectfully disagree. My 2003 model we put 120K miles on it. Only thing outside of maintenance was an alternator. Otherwise brakes, tires, oil changes...it was reliable like a Camry
I’m temped to do it myself as I have done my brakes and spark plugs and oil change on my corvette, I’ve even replaced the window motor but tbh it does look intimidating
I just did the Summit Racing one on my 2005 C6. I could instantly feel it being smoother. I drive my Corvette daily and it has 85K on it. Tax and all it was $980.
Summit was the one I wanted, but the local shop said it was on backorder and I was not interested in waiting...
Wow 🤩!
You got a good deal.
want to give you huge credit for this video! You nailed it spot on what needed to be done for my car and as a fairly new corvette owner it was a huge help. Thank you!
I once looked at a real nice 2001 C5 Convertible . Everything looked just right until I watched the motor running. The crank pulley was wobbling significantly. When I pointed this out to the owner - he looked at me with a strait face and said - there is nothing wrong with it according to Chevrolet. I told him he shouldn't be driving the car like it was. A month later he had put a TON of miles on it - I forgot the exact numbers but it went from like 89,000 to like 94,000 miles in just one month. I couldn't figure out how anybody could put that many miles on a car in so little time. Some people are just not good liars. Knowing how he blatantly lied about it - I passed on the car.
Just replaced the shifter cable in my 2006 C6, A6 with 73K miles on it. After the cable replacement a quick check under the hood revealed a slight wobble of the harmonic balancer.
A quick call to my Chevy dealer of choice in Rio Vista, Ca. and they are saying about 6 hours of labor to replace the harmonic balancer.
And part of the sales pitch for the new GM harmonic balancer was that they have seen trouble with after market harmonic balancers also.
About $1350 or so to do the job. No new belts, no new seal, no new tensioners, the only thing new was the harmonic balancer.
So as I drive the car very little in the winter I think when the weather gets a bit better next spring I will be replacing the harmonic balancer myself.
I guess I will learn to cuss like a sailor.
Great video! The OEM balancer on my C6z broke off its center hub. I also replaced it with an ATI Super Damper and pinned it to the crank with an ARP crank bolt
Thank you so much for this info. Here I am August 2024 doing research & your video is the best one yet!! Thank you
Thanks for the information.
I had a 2005 C6, with the Lingenfelter supercharger installed. At 23,000 miles, I replaced my 1st harmonic balancer. I used a factory replacement. It failed again in 4000 miles. The 2nd time I used the ATI balancer. All is well now. What is upsetting, is that GM has several service bulletins out on this problem, but they don't stand behind the repair.
I replaced mine on my 2007 in September 2024 having done the work myself at a friends garage that had a 2 post hoist. At 35,000 miles it had developed a significant wobble. I replaced the Dampener with one made by Dorman. Fit and finish of the unit is excellent.
Great Video, i have a 2007 and did all you did and the following as well...waterpump/thermostat and an ECP alluminum radiator. Not hard, just labor intensive. Car is super reliable now.
My harmonic balancer went out at 27,000 miles. Could not find a balancer anywhere so finally found a doorman brand. I replaced everything but tensioner mine was 875.00 total on 10/2/23. Saved the old one because I cant find them anywhere and going to take it to a machine shop to see if they can repair it. Good video, thanks Randy
Great video sir! I have used Masterworks for my '99 Coupe on few occasions, and have been completely satisfied every time. Their current labor price is now $135 hourly. Greetings from Shelby Twp.!
You are definitely a die hard Corvette guy and I love it. I have learned a lot of information from you about vets in my quest to buy my first Corvette. So far we are looking at buying a used 2007 or newer thanks to your TH-cam channel.
And I believe congratulations are in order since I think you mentioned somewhere else that you just took possession of your brand-new 2023 vet. I love the way you’ve had Corvettes for so long.
Summit balancer $200, ARP bolt $37, PS fluid change $10, labor 6 hours@ $70/hr. Total $680 done,. Runs perfectly
just put the summit one on this weekend. only cost me $720, beverages and 18mm crows foot!
Masterworks is great. Hope your satisfied with everything. Brian is good people.
They did a great job…
I have replaced my harmonic twice. I think the first time it was Doran, the second time OEM. I saw another video that ranked the C6's and it said, i8f you want one go with the '2' engine. A GM engineer told this guy that the '2' was probably the best platform Chevy has ever made. He said you could turbo it, supercharge it, nothing seemed to phase it.I wish I knew that before I bought my car.
Summit Racing also makes a great balancer for around $200. I also used an upgraded ARP balancer bolt. Additionally, I purchased a pin kit & had the balancer drilled & pinned to the crankshaft, as the balancer spinning on the shaft can become a problem as well. Money well spent while you're already in there. Hope this helps.
I wanted to do the Summit Racing balancer...but the shop said it was on back order. And I wanted to get the car done while I was on a short vacation. I needed it fixed before I am back out on a race track in about 10 days. So I was OK with paying the extra $200 for the ATI...
thats the hard part of the supercharger install. glad to have that done, now when I can afford it the A&A should be a breeze!
dealer rates in South Florida are 220 per hour labor. thank you for the breakdown i think other then labor costs at today's rate you are right on the money. i was charged 2400 at the local dealer labor was 700 more then you estimated and parts could have been a little more expensive as well. i had no idea what a harmonic balancer was but heard a noise and noticed a belt wobble.
beautiful video, going to look at an 08 c6 today, will definitely look out for wobbles on the damper
Thank you! A lot of videos out there on doing it yourself, but not many on having a shop do it for you, so this was helpful! Want to get a rough estimate for my c5
You did an excellent job putting this video together! This Friday, i will be buying a 2013 grand sport. Hopefully, the hb is good on this car! I didn't think of checking it while i looked the car over.
I changed my damper with an ATI unit, with an ARP bolt. I also replaced the front oil seal, all belts, hoses, and tensioner. It took all of six hours, dropping the engine cradle to remove the steering rack. The only thing that I would have done differently, is replace the plastic power steering pulley with a steel one.
I did that job myself. It was not as easy as some say. If you are not experienced with turning wrenches, don't do it. However I did succeed. I've put over 2500 mi since and it's working. 700 in labor . It's worth it. As long as they are good. Problems with other components may arise if not done carefully.
Well done video!
Thank you for sharing this information. Very informative details.
got mine done 2 weeks ago from a shop $400 labour you do not need to remove the rack there is a way to do it dropping the cradle takes about 2 hours with a hoist the shop quoted the 6 hour way and i asked them if they would mind watchin a video and they did and the car was dropped off at 7 am they started the job at 8 am and it was sitting outside done by 11 am c6 corvette
Mind linking that video boss?
@@matiasespina1490 th-cam.com/video/ayoaXNKq1EQ/w-d-xo.html
@@matiasespina1490 the video starts 3 or so min in just rewind it to the beginning 1500 bucks is crazy money removing the rack means alignment too more money dropping the cradle you dont need an alignment
wonder how many bolts were left out and cross threaded and strip out with a impact wrench, lol
This is a great video. Tonnes of info. I need mine done on my 2012 and this helps a great deal.
thanks
Just had my harmonic balancer replace with a OEM and I have a bad vibration, going back to the shop tomorrow
The one thing I didn’t see and I would recommend is pinning the balancer. It about a $75 kit and keeps it from walking off the crank.
Good suggestion. I did not have that done...but should have :)
Just tuned in and was happy to see Masterworks mentioned. They do honest, fair, and great work. Thanks!
Thanks awesome video..just purchased a 05 c6 27000miles same color as yours..I will have mine replaced...keep up the awesome videos
I found a 2007 with 18k miles. Went to teat drive the car and noticed the wobbling HB. I told the GMC dealer they need to replace it or I will not buy the car. What do you think. I could also ask them to discount the car another $1600 and get it fixed. They will only use GM replacements.
Has the dealer replaced the balancer? 😅
No, they would not so I did not buy the car.
the car was sold as is
Great video on this. Replacing the HB seems to be a given on the LS motors used in the Corvette. This why I am looking for a car this was already done on. Curious if the Camaro V8’s have same issue?
Same motor....same issue (at least that is my assumption)
Good job on the video. I had my balancer bolt and belts replaced for half that price tho.
2010 With 88k on it. Having HB replaced thru aftermarket warranty with OEM as that is what warranty covers. Should be done today!
I currently came into ownership of a 2001 c5 convertible and I'm in the Toledo/Detroit area and I appreciate the info on the shop you used. My dad passed away from covid and he was doing some exhaust mods along with some upgrades and I was questioning what reputable shop to use. Thank you again, great video🤙
Your video of the balancer dancing around looks a lot like mine. 😮
I was planning to replace it anyway. At $1,500 rounded up, it’s almost a no brainer 🧠.
What’s the benefits to the non OEM balancer? 😊😅
The OEM balancer was not very reliable. You don't want to have to do it again after another 25K miles.
@@FindtheRightRoad Got it!
Do the non OEM balancer have other benefits?
@@WarriorsPhoto Not that I know of...
Excellent coverage and informative information. Do you have any referrals and/or know any independent shops in Southern CA. Thanks!
Think you got taken on the labor charge to replace the tensioner n idler pulley. With it apart already it should have taken the 5 minutes to change
Great informative video, Thank you!
Im wondering if the one he got is good for the air conditioning belt too though
Great video! I took alot of screen shots! My 05 Vette has the wobble. I have a Fluidampr on the way, but I'm just curious. Did you stop driving it after noticing the wobble? I won't be able to get mine changed for a couple of weeks and still want to drive it. Nice and easy of course. Nothing over 3k RPM.
Did you get it fixed? If so how much did it cost you?
Great Video Thanks for all the info
Did you pin the new balancer? I would have
Well, just saved myself appr. $ 2000 CDN by DIY..
I watched many different vids on this before tackling the Job.
Strangely , one part nobody ever mentions ,when I pulled the original Damper I found a shim which has a rubber piece on the circumference., it’s a $ 28 CDN part.
It does help to cover the keyway all of the aftermarket Damper have instead of having to mess with ATV filling the Keyway..
My car is a ‘07 Z51 convertible , so I’d assume that “Shim “ will be found on all corresponding yrs C6’s.
Thanks for sharing. How long did the process take you ?
The C5 doesn't have a key way on the crank.
@@dougdavis7171 correct, but most aftermarket Dampers are machined for keyway cranks.
Thank's tom🤙
So far, I haven't seen a wobble. I've been watching the weaknesses of the C5. I have a '99 convertible with 7700 miles. Great miles but age takes it's toll.
My dad had a stroke, In rehab- I got his low mileage 06 LS2 vette out to clean up- shredded a belt, then shredded another- balancer going out
Wow...that is a bummer...
Cost alot to own a Vette. I'll be sure to do this. M6 2005 base grandpa vette has 25k softly driven miles on it. Should I do it now or wait?
bought mine with 38k miles and it had the wobble then. finally replaced it at 60k this weekend for peace of mind. I bump the rev limiter time to time and always driving it hard too. you can probably wait a while, the car idles smoother now tho
@@oicu81b42eh I appreciate the advice buddy
I have a 2007 bought new, never raced, and has 33,127 miles as of today. Always dealer maintained. Would you recommend replacing the HB along with the other components as a preventive measure before failure symptoms? After having owned 5 Corvettes, this will be my last, and I plan on keeping it till I can no longer get in or out of it. We will be taking several trips up the coast this spring and summer, and don't want any on the road problems. Thanks
I would just keep in eye on it. When you start to see it wobble a bit, it is time to get it done !
how does the harmonic balancer sound and work now, after doing this video?
I'm original owner of my C6 with 58K miles on it. So far the HB is OK. I must of got lucky.
Hey I am looking to purchase a c6 ls2, current owner is getting hb done there was no noise but he caught the wobble. Would you advise to still buy it or just stay away from it? Thanks
I would still buy it. But ask the seller what model HB they are installing. I would avoid the Chevrolet OEM model. They just don't last...
Im getting a pulsating vibration at 74mph+ , could this be the culprit? Changed every chassis component known to man…tires..balance… vibration still there
I don't think so. But the nice thing about the HB, is it is easy to identify when it is failing. Start the car and take a close look at it. If it is wobbling, change it out.
Vibration sounds like suspension, tires, wheels...
Do you still have the C6, and if so, would you consider selling it. Your car is exactly what I’m looking for…Thanks, Jeff
NVM, I saw in another vids comments that your sold.
Sorry. Sold it last summer (2022). Bought a C4 (1995) to film for the channel this summer...
@@FindtheRightRoad Thanks for the reply, your content is quite good, keep it up!
Just had mine done with OEM part on a 2002 model with 47000 miles.
Yeah the 2006 CTSV I just bought needs done at 66,000. Another GM fail !!
Six speed manual 2007 c6 41000 miles ,replaced with super damper and all the other components, had to buy 125 dollars in tools ,chevrolet dealer wanted 2700 to do job,took me all day to replace for first time 12 hours, love the performance of car but after seeing the possibility of having to replace any other part of car ,and the compacted engineering components IM GOING TO SALE IT AND BUY A BICYCLE, after working on my corvette you will cuss like a sailor
Aww Damn it i didn't know about the crank seal
What a great deal I would pay that no problem give them a $500 tip
My 07 80k mile is getting a non oem next thursday.
What did it end up costing and what state ?
@@paulmoss7940
North NV. Getting quoted 1100 to do simple oem style balancer. Getting an ATI from summit along with accessories, tensioner, spark plugs. Haven't gotten a final bill yet but will be around 1600.
Well worth it since I'm prepping the car for road racing.
@@napalm84 Smart move Good luck.
Anybody know any good speed shops in northern Illinois
speed inc shamburg
@@kev1299 Thank you so much I appreciate that!
Nickey performance in loves Park Illinois is also a phenomenal phenomenal speed shop!
Those labor prices to replace tensioners are high
You are probably right. But it was a shop that has a very good reputation and I was willing to pay a little extra to make sure it was done right.
@@FindtheRightRoad well that's better ...a good shop with reputation is worth the money we pay... We get what we pay
@@FindtheRightRoad why not let the shop do the hard part, the harmonic balancer and you do the easier part the tensioners. That would save you a bit of money.
Don't understand the labor to replace the tensioners. Once the rack is out it's just a few bolts, zip, zip and they're off and then zip, zip, and the new ones are back on.
Mines 16k miles 2007 ls2 and this is happening f…..
Yup. It sucks. GM should have replaced these all under warranty.
Does this happen to all LS engines, do they all have a similar design? I see the HB for the supercharged engines have a keyway a drift, on a standard LS can you machine a keyway while the engine is in the car and put in a key and drift to "beef it up?" I personally love the C-6 body style, I think it is the best looking Vette of all time. I really would like to buy one before they start appreciating out of sight. Then my commons sense and experience tells me to remember - GM products are junk and to stay away.......
I believe this was an issue with the LS2 and LS3 models (6th generation) primarily. I have no idea what you are talking about when you say "have a keyway a drift..." So I can't answer that. But I do not think GM products are junk. Our 2003 Corvette we bought brand new and put 120,000 miles on it with zero issues other than an alternator that went...
Nothing like being able to choose a $500 part over a $90 part must be nice
I wanted a $200 Summit HB, but they were out of stock and I was in a rush. I needed it done before I was headed out to a local race track for a track day...(which ended up getting cancelled)
My 01 convertible has 150,000 on the original balancer, no wobble at all. I would definitely use factory part!
Yup those c5 and c6s are money pits especially if you dont do the work yourself!........i brought a c5 convertible for 10k which is pretty cheap and the previous owner showed me 6k worth of reciepts which included the new balancer.....Now I have the car and i am getting codes and the traction control doesnt work, rear end is leaking, ac vent issues but i do much of the work myself!..........c5s and c6s are cool cars but they are junk, typical gm products!.......i dont care if i get heat for telling the truth!
$1500 is not bad. I expecting a lot worse
got mine done 4 bills canadian 1500 is a jip 200 for the balancer bolt and seal fo 600 parts and install done this was 2 weeks ago
@@corvettemustang1 Where did you get it done?
@@leoclement3801 im in bc canada a place called fraser tech did it they quoted me 6 to 7 hoursthen i said would u mind watching a video if i came by they did and 400 got it done
You don't need the expensive ATI, just get oem for $65
...and in another 20K miles you will be replacing it again. The OEM is junk...
$725 labour to replace a couple pulleys? Wow, you guys are suckers! That's an hour job including clean up and an oil change. The LS engine is the easiest engine in the world to work on.
You clearly have no idea how big a job is to replace a Harmonic Balancer. There is ZERO chance you could change it in an hour...None. Zero. Nada.
@@FindtheRightRoad If you've never dropped the steering rack before I can see it taking 2-3 hours your first time. After 2 or 3 times it's just going through the motions and you'll have everything memorized. I can just about do a cam swap in 7 hours.
Just keep in mind the majority of Vette owners do not work on their own car. So they want an idea what it costs to have a pro do it....@@wally7856
@@FindtheRightRoad Fair enough, but I still think that book time is too much. 6 hours plus another hour for tensioners is union time including lunch and coffee breaks. I suppose it keeps the shops in business but at your expense.
Chevy dealer near me charges $195 an hour labor. My 2006 only has 9600 miles so I’m hoping to not have to do this for a while
I think you got ripped off. The standard hours of replacing the balancer and seal is 4.4 hours
I’d like to see that on a 100k vehicle. That steering rack is not fun to pull. I’m at 6hours to pull it out by myself. Granted if I had a lift I could shave some time off. This is not an easy job.
@aikamatwal6333 - 4.4 hours on what exact engine, year, model? I could only see that if able to just loosen the rack and move it, not have to pull the radiator and fans . . . and of course having a quality puller / install tools. Not to mention having done it before on that exact model vehicle.
That’s why you don’t buy a vette. Constant money pit 💰
I will respectfully disagree. My 2003 model we put 120K miles on it. Only thing outside of maintenance was an alternator. Otherwise brakes, tires, oil changes...it was reliable like a Camry
What car isnt? You fool
Coming from someone who likely doesn’t have the education to afford one…
Same could be said of any performance car.
so says the google mechanic with a chevette wishing it was a corvette
I’m temped to do it myself as I have done my brakes and spark plugs and oil change on my corvette, I’ve even replaced the window motor but tbh it does look intimidating