Repairing broken pvc pipes thread in the wall in this way will save you from needing to punch the wall to replace the thread head, and reduce the cost and time to repair it! Do you find this method of pvc pipes repair useful to you?
Licensed Plumbers don't use PVC through the wall. In the Philippines they don't have plumbing codes ... Enough of the super glue and styrofoam 😂and heating up PVC ...Can we see the other side of the wall?
Will the tube strong enough after you thinned the tube. And for the second one the stick area appear to be a bit small. But it may work I just don't know
I've seen the plumbing standards in the Philippines. They use hoses. And PVC is not available as they're are no Home Depot's or Lowe's around 😅. I've seen them use bamboo in the Philippines and Asia
Interesting solution to the problem, but I would think the handle is backward. Water should be flowing when the handle is in the same direction as the pipe and water is off when the handle is perpendicular to it.
set it to your working speed! you see in the video i set it to max but with fast working speed! be aware of the possibility of overheating if it gets too close! best regards!
Unfortunately these 16 bar pipes with low thickness are appropriate with low pressure not high pressure and the pressure to the water in this video could be just 1 to 1.5 bar maximum, so these maintenance could work , but high pressures needs to replace portions. And instead of using sand paper to roughness the valve surface , just use (thinner or cleaner with brush ) it is guaranteed.
No.....A master plumber is one you can hand a set of plans to and he'll plumb that house (waste, water and gas systems) from the ground work to finish, by himself without holding anyone up. (That's me)
Thank you for these words of encouragement, it's great! maybe each place and each person will have a different way of doing it so each person will have a different assessment, that's also good for me because it can help me to improve myself more! Thank you, I wish you and your family peace and happiness!
he used electrical pvc conduit to repair it. The pipe was broke in the wall he didnt have enough surface to glue the conduit to, and this time it is going to leak into the building in the wall. Do not fix a broken fitting like this. You are asking for trouble in side.
I'd have got a pipe small enough to neck down and glue into the pipe itself then put a threaded end on. It's a spigot, doesn't necessarily need full flow just to run a sprinkler.
Yes, sorry for this! really this problem is due to the fault of the manufacturer they created such a product! but you're right, it's reversed! Thank you very much, wish you and your family peace and happiness!😄
Terrible - an expensive, leaky bodge. Cut the wall around the pipe with a 4" grinder, take off the old broken fitting by grinding one side to pipe level then levering it off, glue a new one, and repair the wall. The worst bodge up I've seen.
He's doing it for views 😂 and 💲💲. Most people who don't know about plumbing codes and safety standards think this is cool. But have you seen the building standards in some Asian and Philippine locations? They're are no building codes or standards.
Interesting although I wouldn’t have plastic on my outside hose shut off valve but hey to each his own😮 here in Tucson, the sun would disintegrate that in two months, maybe three best to rip it all out and install copper😊
thank you for watching ! Instead of using plastic, you can choose for yourself other materials that are suitable for where you live! thanks and good luck
It's not a choice of where you live. In the USA they're are plumbing codes a licensed Plumber has to follow. It's a great video but you should have a disclaimer stating. Please follow local codes ...
@@Goodvibes-Adventures yes I know each living area will have a different way of doing things and standards ! anyway thank you for the reminder, thank you for your kindness! I will revisit these issues!
I like the repair but I am sure an outside faucet would need a metal shut off to hook a garden hose to. I too think the repair was needed as someone pulled the hose too hard breaking the plastic pipe. Now what do you do a year later when one breaks the repair?
thanks for watching! If so, you can choose for yourself another suitable way based on the content of other videos on the channel! Thanks and good luck!
Repairing broken pvc pipes thread in the wall in this way will save you from needing to punch the wall to replace the thread head, and reduce the cost and time to repair it! Do you find this method of pvc pipes repair useful to you?
Yes
Yo creo que sí es de noche y no se tiene lo necesario para la reparación está bien, pero al amanecer se tiene que reparar con lo adecuado
@@linoross7493 thanks you! have nice day!
@@joseluismora8844 Thank you for these responses! Have fun and happy
@@linoross7493😅
Very useful, thank you Master from Venezuela, my like.
Excellent workmanship." A "class plumber.
Thank you for these compliments! Wishing you and your family peace and happiness!
Licensed Plumbers don't use PVC through the wall. In the Philippines they don't have plumbing codes ... Enough of the super glue and styrofoam 😂and heating up PVC ...Can we see the other side of the wall?
Muy util, gracias Maestro desde Venezuela, mi like.
Great shot Idol, Thank u very much for sharing useful video....
Thank you for watching and welcome to the channel! Hope to see your comments in other videos! Wishing you and your family peace and happiness!
Good ideas may it helps a lot of people to save money and time.thank you guy
Thanks
You are practically the Best person I have ever seen like wow.....since day 1! I loved all the moments you share
Thank so much ! Have fun!
வாழ்த்துக்கள். very good job.
Thanks you!
This just saved us from a call to the plumber. TY ☝️🙏👋👍👏👏👏
Parabéns pelo vídeo recheado de um conteúdo maravilhoso onde pode-se solucionar varios defeitos com habilidade e precisão...
thanks you! have nice day!
Will the tube strong enough after you thinned the tube. And for the second one the stick area appear to be a bit small. But it may work I just don't know
Use the iron or copper pipe to avoid the broken pipe
That's right ! if using metal pipes will limit broken situations, but that doesn't mean it's not broken! Thank you for watching and have a good time!
Iron will get rust at the end they do like this and its more difficult to replace once its broken or get rust . Plastic less work and cheaper
Positivo, ideia brilhante 🌟
Maybe it will be useful to someone or a certain area! but if it is completely replaced by new ones those are the top priorities!
He just changed the leak from the outside to the inside of the house. Two wraps of Teflon tape are plenty.
Thanks you , sir!
It didn’t blocked the flow of water to the outside😂
@@ottodepaz7187
I've seen the plumbing standards in the Philippines. They use hoses. And PVC is not available as they're are no Home Depot's or Lowe's around 😅. I've seen them use bamboo in the Philippines and Asia
Interesting solution to the problem, but I would think the handle is backward. Water should be flowing when the handle is in the same direction as the pipe and water is off when the handle is perpendicular to it.
yes, thanks for watching! very correct and very sorry for this omission! Wishing you happiness and good health, sir!
Amigo en que temperatura se coloca la pistola de calor, gracias.
set it to your working speed! you see in the video i set it to max but with fast working speed! be aware of the possibility of overheating if it gets too close! best regards!
Unfortunately these 16 bar pipes with low thickness are appropriate with low pressure not high pressure and the pressure to the water in this video could be just 1 to 1.5 bar maximum, so these maintenance could work , but high pressures needs to replace portions.
And instead of using sand paper to roughness the valve surface , just use (thinner or cleaner with brush ) it is guaranteed.
Thanks you
Thank you very much 🙏
Welcome!
Cách nối ống nhực pvc này cũng rất hay nha cảm ơn bạn
Thank you ! Hope it will be useful to you and everyone! Thank you and good luck to you!
좋은기술 잘 배워갑니다,,
Thanks bro!
That's a master Plumber !!
thank you!
No.....A master plumber is one you can hand a set of plans to and he'll plumb that house (waste, water and gas systems) from the ground work to finish, by himself without holding anyone up. (That's me)
Excelente me ayudó tenía un problema similar
Y lo resolví con este vídeo gracias .
Glad it was useful to you! have fun
If i dont have tools like you .. any way around?
Great ideas
Terima kasih mudah 2 an diberi ilmu untuk kebaikan orang banyak dan diberikan kesehatan lahir dan batin
How about if the existing is g. I pipe can you show me how to repair?
What is g.l?
Al cortar el pedazo de rosca rota, se podría enroscar en la que quedó que no está dañada?
How about if the existing line is g. I pipe?
I do not understand your question ! Can you please be more specific?
Very good skills
Mantap, tehnik yang sangat baik
Thanks, Have Nice day!
So beautiful 👌🏻💯
Any leaks on the other side of the wall??
請問鑽水泥牆的圓型切割工具，它的正確名稱叫什麼呢？謝謝❤
Thanks for watching, Check out this phrase: diamond coated glass drill bit.
@@dailytricks6161謝謝您
@@dailytricks6161 what is the price of this one inch drill bit
Good job
Thanks!
Well done!!
Good video, very good idea
Good job thanks for your video
Thanks and welcome to me! Hope to receive your comments for other videos on the channel.!
Looks like life in the Philippines
You are wrong! Can you choose again?
Asik dan selalu semangat berkarya amin
وجعلنا من الماء كل سيء حي ❤❤❤
Great idea!
THANKS YOU
If it worked for you your good. Don't mind what other people write because they think they know better. Different places call for different methods.
Thank you for these words of encouragement, it's great! maybe each place and each person will have a different way of doing it so each person will have a different assessment, that's also good for me because it can help me to improve myself more! Thank you, I wish you and your family peace and happiness!
Good job my friend ,this will help me when I moved to my country of Origen
@@ottodepaz7187 Thank you ! Nice to see you here, hope you enjoy the other content on the channel! Wishing you health and happiness!
he used electrical pvc conduit to repair it. The pipe was broke in the wall he didnt have enough surface to glue the conduit to, and this time it is going to leak into the building in the wall. Do not fix a broken fitting like this. You are asking for trouble in side.
Thank you for leaving me a feedback and good luck!
😂 He gave you a automated response. Someone should report these vids to plumbers standards...As it's deceptive just to get views and donations
Love the handle on that hacksaw blade.
you are so happy!
I'd have got a pipe small enough to neck down and glue into the pipe itself then put a threaded end on. It's a spigot, doesn't necessarily need full flow just to run a sprinkler.
great repair idea, very helpful
Thanks for the great comments! Wishing you peace and good luck! Hope this simple trick will be useful to you and everyone!
La posición de la llave de apertura y cierre están invertidas 🤔
Yes, sorry for this! really this problem is due to the fault of the manufacturer they created such a product! but you're right, it's reversed! Thank you very much, wish you and your family peace and happiness!😄
Esa válvula está mal, ahí indica en la posición de la palanca abierta y ahí está cerrada y cuando indica cerrada está abierta
I have been a plumber for many years
great idea thank you!
thanks
That should last about a day , and if the crack is deeper than the splice it will leak inside the concrete
This "solution" is very risky and may cause huge damage.
Hay quá bác ❤❤❤
thanks you! welcome and have nice day!
Ok so new tap was fitted with pipe were was the water while this was been done the plumber does not show turning off the water at the mains .
thanks you
Amazing👌 the ideal👍 on
Thank you so much!
Maybe the pipe has a long crack inside of the wall?
It just cracked at the thread head, and I fixed it!
Thank You
welcome and have nice day!
Thats a great fix
thanks!
beli lem yg ada kuas di mana ya
"Amazing" & "Interesting"
Thanks
excelentes videos
thanks you! have nice day!
I understand that the wrench must be put on the adapter first and adjusted well, and then put it on the tube since otherwise it could be crooked.
So gorgeous and amazing
Thank you
wonderful🌹
Thanks
Los puntos direccionales,deben ser galvanizados.
Como se llama la pega que usa.
Specialized glue for pvc pipes, sir!
Bien
Terrible - an expensive, leaky bodge. Cut the wall around the pipe with a 4" grinder, take off the old broken fitting by grinding one side to pipe level then levering it off, glue a new one, and repair the wall. The worst bodge up I've seen.
Yes, these youtube idiots giving bad pieces of advice for non plumbers.
He's doing it for views 😂 and 💲💲. Most people who don't know about plumbing codes and safety standards think this is cool. But have you seen the building standards in some Asian and Philippine locations? They're are no building codes or standards.
Yes, but Teflon tape must be free!
Low man power cost in his contry😂
Interesting although I wouldn’t have plastic on my outside hose shut off valve but hey to each his own😮 here in Tucson, the sun would disintegrate that in two months, maybe three best to rip it all out and install copper😊
thank you for watching ! Instead of using plastic, you can choose for yourself other materials that are suitable for where you live! thanks and good luck
It's not a choice of where you live. In the USA they're are plumbing codes a licensed Plumber has to follow. It's a great video but you should have a disclaimer stating. Please follow local codes ...
@@Goodvibes-Adventures yes I know each living area will have a different way of doing things and standards ! anyway thank you for the reminder, thank you for your kindness! I will revisit these issues!
I like the repair but I am sure an outside faucet would need a metal shut off to hook a garden hose to. I too think the repair was needed as someone pulled the hose too hard breaking the plastic pipe. Now what do you do a year later when one breaks the repair?
very good
thanks you so much!
It's going to leak, and that is electrical conduit.
Thanks
May want to send this video to OSHA
Very innovative indeed...
thank so much and have good time !
Sáng tạo thật tuyệt vời 😮
Thank you for watching and leave me a comment! I am very happy for that , thank you and wish you peace and happiness !
how to change safety valve of shower,
Thanks and welcome to the channel! Wishing you and your family a lot of fun and happiness!
Super
Thanks you!
👍Excellent
But these tool not available in house
thanks for watching! If so, you can choose for yourself another suitable way based on the content of other videos on the channel! Thanks and good luck!
Can't do that with schedule 40.
He may not know what. Schedule 40 is 😂. Might think it's a college class
cool😍😍😍
Muy práctico.
I like these tricks but water will back flow
thanks!
Very Good
thanks bro. have nice day!
nice...
Welcom and Have Nice day
Great repair, next time use a male fitting it will not split. Just a suggestion.
Thank you
It was staged so he can get views and donations 💲💲💲
สุดยอด ขอบคุณครับ
Welcome and thank so much!
Plastic faucets only last about 6 months, then it starts leaking and you'll replace it again.
Chinese faucets last about 2 weeks.
yes, thanks for watching and thanks for your advice! that's great , wish you fun and success .
That's all they have in the Philippines...They don't follow codes for building or electric or plumbing
you must own stock in the teflon tape company.
yes, bro!
So this means I don't have to call my plumber?
If you can repair it yourself and it can work well then this is absolutely solid, thank you very much!
No soy plomero pero ami parecer se adapta primero la unión a la llave
🇨🇴. 🥀. Saludos 🦩Gracias 🤸
Wow that is attractive♦
good
esa cosa que aplica calor como se llama
🔥 fire 🔥 flames 🔥
Good
thanks !
That's for drain pipe only
This is onky a truc but not permanent solution possibility of future keak
Thank you for watching and leaving me a comment, I hope it will be useful in some cases, and for sure replacing it completely is a great option!
✨😍✨👏🏻✨👏🏻✨Strong💪
Thanks you
Parabéns LIKE
thanks you for watching and have nice day!
그냥 재미로 보아야지 수압이 걸리는 곳에 저렇게 하면 난리납니다
Yes, Thanks sir!
5:56 ❤❤❤❤❤