I did this on my 2021 rs6 and when I went to operation “set reference level” make sure it’s on flat ground and connect a battery boost box to support battery voltage. I encountered a malfunction that took me about 2 hours to resolve. Otherwise so far so good.
Thank you for this video! going to attempt this on my C8 RS7. What year is your car? does it matter what drive mode you are in when doing the coding? Also I assume the hood needed to be open? I looked for a thread on the VCDS forums to give me more confidence but they all seem to end with people having fault codes and suspension faults.
I was following what’s on the forum. And I got request out of control when doing delete calibration for level control. Wondering if this step is required or not
It is working perfect on ALLROAD and Q7. Please do you know how set/adjust modes individually. For Example : to set height on Allroad mode/Dynamic mode, because when I do this from clip, it is affecting all modes, So If I lower the car in comfort, it lowers in Allroad/Dynamic too. Can I set which mode to lower or not? Second question: Is it possible to change maximum speed on offroad mode ? Or change the speed when car lowers itself on highway ? Thanks!
Very good video for me it works thanks man.I will look forward to more coding videos on RS6 C8 🙂
This didn’t work for me. It lowered it fine, but all sorts of errors and need to go to dealer now to sort out.
Thanks for this video. It worked perfect 👍🏼😃
Hood open and attached to trickle charger when you run the VAG COM? 25mm drop front & back?
I did this on my 2021 rs6 and when I went to operation “set reference level” make sure it’s on flat ground and connect a battery boost box to support battery voltage. I encountered a malfunction that took me about 2 hours to resolve. Otherwise so far so good.
Was the malfunction directly and only related to the ground not being flat? Or was the battery boost box also a factor?
Thank you for this video! going to attempt this on my C8 RS7. What year is your car? does it matter what drive mode you are in when doing the coding? Also I assume the hood needed to be open? I looked for a thread on the VCDS forums to give me more confidence but they all seem to end with people having fault codes and suspension faults.
I was following what’s on the forum. And I got request out of control when doing delete calibration for level control. Wondering if this step is required or not
Thank you for the video. Can it be set independently for Comfort or Dynamic mode?
Don't think so
It is working perfect on ALLROAD and Q7.
Please do you know how set/adjust modes individually. For Example : to set height on Allroad mode/Dynamic mode, because when I do this from clip, it is affecting all modes, So If I lower the car in comfort, it lowers in Allroad/Dynamic too. Can I set which mode to lower or not?
Second question: Is it possible to change maximum speed on offroad mode ? Or change the speed when car lowers itself on highway ?
Thanks!
I don't believe this is possible
Has anyone done this on their C8 s6?
Will this procedure work for 2023 sq5?
it actually worked !!!
How low did you manage to drop the car? 17mm I understand that is the safest number @@ziruiliu4510
Has anyone on here ever tried this with the newer SQ7?! 🙌🏼
Working on Q7
Tried this on my 2019 SQ5(FY). Security access don’t work. And I couldn’t activate level control. If anyone has the access code, could you share?
No code needed
Did you get it to work without the security code?
Yes it will work without SA
@@nils7589 thanks, do you know what the error in the end of the video is about?