I don’t have time to try to do servo swaps or the know how but when I get time I’m gonna watch all your videos n try to duplicate what you’ve done to your 64 it’s freakin clean n I like the way you got it to move ! Freakin nice !!!! 😳🤗👍👍
Thanks bro don't hesitate to ask a questions long the way I'm here to help. Some possible crazy servo coming to get tested n might bang harder than Reefers stay tuned
I have a question I’m putting my leds on channel 4 on the redcat 64 to control them off and on nothing happens I’ve tried messing with mixers and plugging it differently but nothing happens on channel 4
Might add it in a video, its pretty easy once you remove the foam and mag mount. that exposes the bottom screws, the top 4 already there, then you just remove the holder
I have a question about my 64,I just got through changing my suspension to chrome and I installed everything back as usual but when I test my car for hopping it wasn't hopping that much can you help me out on my question.
I have a questions. What are your servos programmed too? Also what are your front servo endpoints? I installed the redcat dual servos and powerhobby 209s on all 4 wheels. Also a high lockup kit but i cant hop, i gotta be doing something wrong but cant figure it out
Nice bro 😎👌🏻on my kit it also came with mini servo mounts for the extra servo it could only hold one screw on the bottom one !! So how redcat ain’t doin something right on the parts 😰!!
Thats hard!!! Thanks for putting me up on game bro. I got one question. Where did you get the longer servo arms in the rear & does that make it lock up higher in the back?
The rear servo arms are actually identical length to stock but require a low profile servo to fit cuz the fat at the gear. Some others should work with standard servos. Stock is 1.5 inch the longer 1.75 and 2 inch require cutting a path in chassis for longer arms to pass but can also run longer shocks n jacke up back higher this make nose pop higher
Does the dual sevo make it pop up better or just help withthe individual wheels? Iv already added the reefs 300 in the front and added a BEC but it doesn't seem too much different than the stock, so I'm thinking of going with the dual servo
Yes, it pops significantly better with the dual Servo set up The Reefs 300 and Gold stock servo are exact same servo only difference is premium case. I have RS400 on the say supposed to out spec the Reefs 300. We put it on the rest rig to see if it lives up to its specs on paper
This RC comes with a single set up for the front so both front hight run off one servo. This add in a 2nd servo so you get independent control on front
@@NorthSideCustomRC Is the channel on the remote that is "not used" the way to get individual? I assumed that since it was "not used" that it didn't have a use at all, which is what I thought was weird. why put it on there if it doesn't do anything? lol
I’m just curious as to see if anyone has upgraded the motor and esc to brushless on the Redcat lowrider. I mean I’m sure it sounds probably dumb cause it’s not supposed to be fast but a lot of people upgrade them a lot.
Hey I ordered a 380 brushless motor and 35 amp esc I tried in my six four and it made the hoping servos glitchy the motor worked on 3s and 2s but the servos acted crazy. Do I need a sensored setup
@@Jasonkartracing if using brushless best to have sensored system. The servo glitching could just be a matter of running a BEC to feed servo power bypassing esc. End of day after running 2 different sensor brushless system I'd rather run a Hobbywing 1080 esc with stock motor. Brushless system way more smooth slow speed control the adjustment on 1080 is perfect for these lowriders . However with 1080 I strongly recommend a BEC to run servo
Are you using the front lift switch on the transmitter to hop? I can’t find any info online about mapping the front lift switch to hit channels 3 and 4 at the same time. About to take it apart and mirror the rear lift switch setup.
@@NorthSideCustomRC I just tried this but does that mean you lose 4 corner functionality? What I mean is when it's not mapped I get 4 wheel control like the monte but my hop switch only works on one wheel. When I mix, my channel 3 and 4 are locked together and I can't control each front wheel individually but my hop switch controls both again. I was really hoping I could control channel 3 and channel 4 individually but map the hop switch to control both. Do you know if this can be done? Thanks in advance brother!
Are you running bec if so can you share that information I'm in the process of doing this conversion to my Redcat trying to get all the information I can
Reefs 300 that comes with redcat is the same shit that he sells He told me the reefs that comes with redcat factory was not programmable and it is Hes a liar and sold me the same servo in a black case Thats a whole ripoff
Should be like that from factory, definitely a must do mod for awesome three wheel madness!!
I don’t have time to try to do servo swaps or the know how but when I get time I’m gonna watch all your videos n try to duplicate what you’ve done to your 64 it’s freakin clean n I like the way you got it to move ! Freakin nice !!!! 😳🤗👍👍
Thanks bro don't hesitate to ask a questions long the way I'm here to help.
Some possible crazy servo coming to get tested n might bang harder than Reefers stay tuned
I have a question I’m putting my leds on channel 4 on the redcat 64 to control them off and on nothing happens I’ve tried messing with mixers and plugging it differently but nothing happens on channel 4
@@NorthSideCustomRC have you heard anything on that possible redcat mini truck bed dancer ?
I’m definitely getting that Monte Carlo
Nice mod, well done
Bad ass
Thanks I'm really digging it
Could you do a tutorial on how to swap monte carlo front servos?
Might add it in a video, its pretty easy once you remove the foam and mag mount. that exposes the bottom screws, the top 4 already there, then you just remove the holder
are you still running weight in the trunk floor?
I have a question about my 64,I just got through changing my suspension to chrome and I installed everything back as usual but when I test my car for hopping it wasn't hopping that much can you help me out on my question.
Hay I want to order the kit but it comes with a half under front chassie it
That normal
I still can't figure out how to add the channel 4 servo to the hop switch... please help
chan 4 Mix setting, change it
I have a questions. What are your servos programmed too? Also what are your front servo endpoints? I installed the redcat dual servos and powerhobby 209s on all 4 wheels. Also a high lockup kit but i cant hop, i gotta be doing something wrong but cant figure it out
Nice bro moves alot better what did u set the servo setting on the remote the endpoints thanks in advance
I reprogrammed the travel on the servos to 80% in the servo programing software then the end points are 99/99 for both sides
@@NorthSideCustomRC does it need to be reprogrammed using the software, can it be set by just using the remote
@@G-J-92 end point are set in the remote they are different for every car, I do have videos on setting end points
Nice bro 😎👌🏻on my kit it also came with mini servo mounts for the extra servo it could only hold one screw on the bottom one !! So how redcat ain’t doin something right on the parts 😰!!
Somebody was sauced up when they putting the parts in the bag eh lolol
@@NorthSideCustomRC big times 😂😂😂
Thats hard!!! Thanks for putting me up on game bro. I got one question. Where did you get the longer servo arms in the rear & does that make it lock up higher in the back?
The rear servo arms are actually identical length to stock but require a low profile servo to fit cuz the fat at the gear. Some others should work with standard servos.
Stock is 1.5 inch the longer 1.75 and 2 inch require cutting a path in chassis for longer arms to pass but can also run longer shocks n jacke up back higher this make nose pop higher
@@NorthSideCustomRC what is a good lipo battery I should get what specs?
Just finished this mod holy it was tedious but I love it. How do you get the raise front switch to control both channels 3 and 4?
hop switch, need turn on mix 4
@@NorthSideCustomRC got it to work, has to put Mix is: On
Where did you get those shocks from I definitely need some just ordered the dual servo kit I got all power hobby servos
They scale look shocks links to everything in the description they functional but take a bit of work to get right
There is no link for the shocks
@@brandonscott1221 lemme fix that
th-cam.com/video/sbebpQNs2UY/w-d-xo.html
Can I use the Jevries Gate pump servos in the front with this setup?
100%
Does the dual sevo make it pop up better or just help withthe individual wheels? Iv already added the reefs 300 in the front and added a BEC but it doesn't seem too much different than the stock, so I'm thinking of going with the dual servo
Yes, it pops significantly better with the dual Servo set up
The Reefs 300 and Gold stock servo are exact same servo only difference is premium case.
I have RS400 on the say supposed to out spec the Reefs 300. We put it on the rest rig to see if it lives up to its specs on paper
th-cam.com/video/x7DQKJ-PkOs/w-d-xo.html
That how it hit Dual servo
Is it hard to install the new servo? I’m just getting into Rc cars
what way is it wired to get individual fronts? I am accustomed to real lowriders. Been doing that over 30 years, but this in new to me
This RC comes with a single set up for the front so both front hight run off one servo.
This add in a 2nd servo so you get independent control on front
@@NorthSideCustomRC Is the channel on the remote that is "not used" the way to get individual? I assumed that since it was "not used" that it didn't have a use at all, which is what I thought was weird. why put it on there if it doesn't do anything? lol
@@caddi70 The LR6X radio was initially set up & designed for the Redcat Monte Carlo, which uses channels, 3, 4, 5 & 6 for the lifting servos.👍🏻
I’m just curious as to see if anyone has upgraded the motor and esc to brushless on the Redcat lowrider. I mean I’m sure it sounds probably dumb cause it’s not supposed to be fast but a lot of people upgrade them a lot.
My Monte has a sensor brushless system
17.5T motor sensorred and Maclan esc vid soon
Thank you for responding I’ll look out for that on. I just ordered a 64 and I have a 380 brushless motor and esc I’m planning on putting in.
Hey I ordered a 380 brushless motor and 35 amp esc I tried in my six four and it made the hoping servos glitchy the motor worked on 3s and 2s but the servos acted crazy. Do I need a sensored setup
@@Jasonkartracing if using brushless best to have sensored system. The servo glitching could just be a matter of running a BEC to feed servo power bypassing esc.
End of day after running 2 different sensor brushless system I'd rather run a Hobbywing 1080 esc with stock motor.
Brushless system way more smooth slow speed control the adjustment on 1080 is perfect for these lowriders .
However with 1080 I strongly recommend a BEC to run servo
What brand and kg servos in the front
Are you using the front lift switch on the transmitter to hop? I can’t find any info online about mapping the front lift switch to hit channels 3 and 4 at the same time. About to take it apart and mirror the rear lift switch setup.
You have mix option to make 3 and 4 work off hop switch together
@@NorthSideCustomRC I just tried this but does that mean you lose 4 corner functionality? What I mean is when it's not mapped I get 4 wheel control like the monte but my hop switch only works on one wheel. When I mix, my channel 3 and 4 are locked together and I can't control each front wheel individually but my hop switch controls both again. I was really hoping I could control channel 3 and channel 4 individually but map the hop switch to control both. Do you know if this can be done? Thanks in advance brother!
@@NorthSideCustomRC What channel is the hop switch on? Maybe that's my issue?
@@RadRaf Chan 3
@@RadRaf the mix setting needs to be changed on Chanel not working
With 600 dollars it should have came like that.
Are you running bec if so can you share that information I'm in the process of doing this conversion to my Redcat trying to get all the information I can
Yes I run BEC in both my RC lowriders. I'll put a vid together on how to set that up easy
Done
@@NorthSideCustomRC thank you
@@ParisJacksonGirl2010 No worries, thanks for the request
Bro how can I make my hopper faster
Less weight in rear make the hop faster, more weight slower the hop.
4 wheel hop?
Yeah she a Hop all wheel off the ground
You do know there's a stack of weights inside the gas tank right
Sure do, well the stack is inside the trunk pan, but there is a chunk of weight inside the gas tank
@@NorthSideCustomRC actually hes right the stack of weights is the gas tank the lil lead piece is not a gas tank never seen one in a real car lol
Reefs 300 that comes with redcat is the same shit that he sells He told me the reefs that comes with redcat factory was not programmable and it is
Hes a liar and sold me the same servo in a black case Thats a whole ripoff