U should definitely buy bolts and nuts from tractor supply if you have them around they are way cheaper and charge by the pound for them. Dude great video like always Im always learning different things watching u
That's dope! I did the same shit on my CRX, made an access hole with an aluminum plate so I don't have to drop the tank to access the fuel pump. Yours turned out way cleaner though. Well done!
@@Rudenutts I did this on my Geo Tracker, WAY better than trying to drop the tank. For the past 20 years, anything w/o an access gets cut if it needs a pump.
all the asthetics can come later *makes plate for the hole for shifter, paints it, installs it, makes rubber gasket, cuts carpet* that’s just ocd brother
I would just put the power glide keep it automatic but the sound of a 5-speed Corvette engine in a Blazer sounds even better your welder getting a whole lot better
Use Bedliner for your floor, I did it for my EG when my carpet went to sh!t 🤣 put holes in the corners with removable rubber grommets and bam💥 you can just hose dat sh!t out whenever you please. It’ll prob match your access port for the trans too 👌🏼👌🏼🤙🏼
You probably need that bolt. Iirc if you dont have it the pedal assembly will flex when you press the brakes and clutch and will bend over time and feel like crap.
So you should remove the intake manifold and bolt to the intake bolt locations, that will give u a little more clearance also up top when having the engine on an angle, love the content
Really??? Honestly I don't even know.. I assume I'd have to alter it in some way. The Blazer didn't come with a crossmember, I plan on trying the one from the truck.
Dude you have a welder, find a nut that fits with a short tube that you can bend, a bolt for the end that will screw on a shifter knob and customer bent to how you want it. Built not bought.
damn right fam killing it broski #DBFamStrong #BuiltNotBought #WhoopWhoop peace and love famz keep it rad stay safe and build on ... ps if u ever see my car u will see i agree function over form lmfao peace bro
Never, NEVER! install any LS with the intake and accesories installed😂😂😂😂 unless its a 70s pickup or older car. Why? Because all that crap is in the way of your mounts visually and ya cant install and line it all up if craps in the way! A measuring tape and some planning is your best freind before you try any install. Its likely you will need to fabricate or buy custom engine mounts and transmission crossmember when doing a custom install, then you will have to contend with core support clearances for radiator and desisions like mechanical fan delete, electric or aluminum water pump, wet sunp or dry sump oiling system, remote oil filter etc etc etc. Your neighbors rig sounds like crap btw😂😂😂😂 horrible exaust and very poorly tuned. Honesty is my best policy👍🤙💯
You may need the steering column out of the truck in the blazer.
I think so as well... I still have the one from the parts truck 💪
U should definitely buy bolts and nuts from tractor supply if you have them around they are way cheaper and charge by the pound for them. Dude great video like always Im always learning different things watching u
Repurposing that weather stripping is genius
❤ each baby steps with the blazer learning alot from my dbf . 856 s.j.
That's dope! I did the same shit on my CRX, made an access hole with an aluminum plate so I don't have to drop the tank to access the fuel pump. Yours turned out way cleaner though. Well done!
Great idea bro! I’m gonna do that to all my EF’s!👍🏼
@@Rudenutts I did this on my Geo Tracker, WAY better than trying to drop the tank. For the past 20 years, anything w/o an access gets cut if it needs a pump.
@@Rudenutts Glad to inspire! I have pics if you want to see where to cut?
That's cool you showed people what's up about your neighbors 👍
You can spray the rubber to make your own carpet, their is a lot of different paint you can use as rubber carpet
all the asthetics can come later
*makes plate for the hole for shifter, paints it, installs it, makes rubber gasket, cuts carpet*
that’s just ocd brother
I fucking lost it when you started throwing that fender around 🤣
Just use vacuum line split long ways... Ez fix!
Braven recommended the same thing 💪
I would just put the power glide keep it automatic but the sound of a 5-speed Corvette engine in a Blazer sounds even better your welder getting a whole lot better
Spray badliner inside the s10 cab mixed with some nice carpet touch. Just an idea.
That transmission is looking really good on the LS motor I really miss my old she is a beautiful SUV
Progress is a process. This is awesome progress.
The plate came out awesome love the rinklepaint
OMG when you were cutting that cluster and turnaround said we're saving that for later I about died laughing damn that s*** was funny
Put the carpet first then the cover over the carpet, it will give it that old school look
Shifter plate came out amazing bro!!!
Looking like some major progress brother....helll yeah 👍
#DBFAM. Coming with the fire content on a Monday.
Use Bedliner for your floor, I did it for my EG when my carpet went to sh!t 🤣 put holes in the corners with removable rubber grommets and bam💥 you can just hose dat sh!t out whenever you please. It’ll prob match your access port for the trans too 👌🏼👌🏼🤙🏼
nice to see progress without spending stacks of paper
Im dying laughing from your comments during this one :')
Keep grindin,! Love it!
you should use one of those chinese rep ktuned shifter extenders for the blazer...throw some honda love into the s10.
Progress brotha! Nice work
Yea bro the rubber door seal trick is mint 👌 👍 👏
I was hoping to hear you say you’d go with the K swap into the S10, to make a reliable daily, when you started putting the LS in the Blazer.
When using the welder make sure you open the gas valve on the tank all the way. It leaks from there. Just saying 😉
You get more clearance if you check the front of the vehicle up
Loving the blazer content! #DBFAM #NOTIFICATIONSQUAD
Dear
What is the use clutch slave cylinder and what is use oil pan?
You probably need that bolt. Iirc if you dont have it the pedal assembly will flex when you press the brakes and clutch and will bend over time and feel like crap.
So you should remove the intake manifold and bolt to the intake bolt locations, that will give u a little more clearance also up top when having the engine on an angle, love the content
i actually like that you do what ever tf you want fuck them neighbors they be ight lmaooooo
love the progress brotha cant wait to see it done
did you put the fly wheel back in, how do you start the motor,`
I never give a shit what my neighbors think I'm loud till 7am if I'm working on something nobody has ever said anything
You should fab an external floor mounted short shifter, plus not a bad video idea but just an idea lol loving the videos lately man!
Sad the carpet idea didn't work.. would of been dope!
Missed a perfect opportunity to do the john cena "are you sure about that".
Damnnn Son!! moving along fast af!!
Such a sexy blazer that thing is going to burn tires off the rim
I feel the same way about spiders myself . I just hate them all !!!
Great video. Great custom work have a great week
Harbor freight has a truck bed coating , you doing great 👍, thumbs up brother!!!
Tuning in late to the program here... what harness are you using?
Can’t use the crossmember from the s10? When I went from the t5 to a nv3500 I was able to reuse the crossmember
Really??? Honestly I don't even know.. I assume I'd have to alter it in some way. The Blazer didn't come with a crossmember, I plan on trying the one from the truck.
I think the Takuache’s were calling you out.
What are you doing with the white civic
Idk if junior is gonna be ready for the smoke from the blazer.
Could've got a shorter oil pan
I’m ready for my s10 blazer
I missed the live stream, who won the Bmw?
Quoted me at 7:13 😂😂😂😂😂
😂😂🤣
I think of your comment every time my neighbor gets home Rev matching down the street 😂
Can’t wait to see how this build turns out!!! I say build her to match khaki and use it two her.
Loving the s-series content!
Trash the carpet and put skateboard tape instead, also fabricate a shifter you already have the stuff to do it
Do 👁️ a white Ej6 in backyard 🤔🧐 interesting 🤔
Why don't ya bolt the cover over the carpet it would look better
Driving w straight headers is probably one of the worst , not coming at you but Js 😂😂 imo
Did a 5 speed swap on a prelude one time lol. It had one of them same hidden bolts but it was under the fucking wiper cowel. Lolololol
Ok maybe not the only crazy neighbor but you did drag a trailer fender behind the Crv lmao
🤣🤣🤫
It sounds like the meets found a spot by the dead beat garage hq 😂
Rural king and tractor supply are the cheapest place to get bolts
I like going to copperstate but it's one of those places that's open 9:00 to 5:00.. I never think of the tractor supply 🤦♂️
If we lived nexted to one another I'd steal all your good shit you leave out and sell it back to you for fun after we get drunk working on stuff
I would’ve taken the whole dash out! JS 🤷🏽♂️
DBFam strong!
Two step is always better to hear than some Karen bitching!
Right 🤷🏻♂️ I'm a car guy so it don't bug me none 😂
Should tucked the carpet under ur plate then screw it down it'll look alot cleaner !
I tried and the plate wouldn't fit with the carpet between it
@@deadbeatgarage s10 build is gana be sick when ur done ! By any chance you have any more of the dimple die raideator suport plate for the ef ?
Just make your own extended shifter
bro get heat treated bolts for the trans. and why the hell wouldn't you weld that in man.
Yeah put the glide in the s10 truck autos are faster at the track lol
Should have just left the truck manual and the blazer auto
Dude you have a welder, find a nut that fits with a short tube that you can bend, a bolt for the end that will screw on a shifter knob and customer bent to how you want it. Built not bought.
💪💪💪 hey hey, I'm still getting use to having a welder around alright 🤣
@@deadbeatgarage better than me, my new welder still has plastic on it from 2021 and a full short bottle. Ima use it soon though lol
Is that a hm290 5spd?
Damn bro ....... fire 🔥!!!!
LS Blazer 💪
What's up dB fam
If you was my neighbor I would help you....Than you could help with my del sol lol
DBG 💪
Keep it coming!! 💯💥👏👌
Let’s go DBG
Hell freaking yeah 🔥🔥🔥🔥🤙🏼💯
damn right fam killing it broski #DBFamStrong #BuiltNotBought #WhoopWhoop peace and love famz keep it rad stay safe and build on ... ps if u ever see my car u will see i agree function over form lmfao peace bro
#DBFAM
Also I will feel super let down as a subscriber if you LS Swap this before you take the Transformers badge off on the back of the blazer
0:24 f**kin mustang
Never, NEVER! install any LS with the intake and accesories installed😂😂😂😂 unless its a 70s pickup or older car.
Why? Because all that crap is in the way of your mounts visually and ya cant install and line it all up if craps in the way!
A measuring tape and some planning is your best freind before you try any install.
Its likely you will need to fabricate or buy custom engine mounts and transmission crossmember when doing a custom install, then you will have to contend with core support clearances for radiator and desisions like mechanical fan delete, electric or aluminum water pump, wet sunp or dry sump oiling system, remote oil filter etc etc etc. Your neighbors rig sounds like crap btw😂😂😂😂 horrible exaust and very poorly tuned. Honesty is my best policy👍🤙💯
Instead of carpet or mats do the floors in rhinoliner
What's up
Wooooo
Bro I need a V8
Let’s go
Let’s gooo notifications squad
Yessir
🤘🤪🤘
comment
1
First!
Until later