6 Aliner Changes made by Tim

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ธ.ค. 2024

ความคิดเห็น • 17

  • @bittersweet6507
    @bittersweet6507 3 ปีที่แล้ว +2

    I especially like your solution to the glaring light. We never use the fixtures because they are blinding. Great suggestions!

  • @eugenebreindel
    @eugenebreindel 3 ปีที่แล้ว +4

    Nice. Keep an I on your extension cord temperature. If the load in your camper gets excessive, such as running a small heater and other general loads, the extension cord can overheat. I did this same thing in winter time and the cord melted its way through 6 in of snow overnight. 😉😁

    • @BothellTim
      @BothellTim  2 ปีที่แล้ว +1

      Thanks for the heads-up.

  • @cecilcogswell4728
    @cecilcogswell4728 2 ปีที่แล้ว +1

    You should note that when you convert to the regular extension cord, at least use a 12 gauge wire extension cord that will carry the full 15 house amps without overheating. A cheap 16 gauge extension cord would be a bad idea. It might even run an AC or microwave individually if you have them, but never together. A good idea for plugging in at a house or backyard, but keep the extension cord as short as possible.

  • @candyalexander2196
    @candyalexander2196 ปีที่แล้ว

    Bench great idea we just bought a frame thanks

  • @johnlounsbury6191
    @johnlounsbury6191 ปีที่แล้ว

    Great alterations

  • @SB4E.2
    @SB4E.2 3 ปีที่แล้ว +2

    Very nice. I was curious how the wall landed on the two bed unit. Your solutions seems very good. Thanks for the visual. Side note: When you convert down with that kind of dog bone, remember you have cut your power input by half. So let your battery charge longer than usual. For us... when summer and cleaning it, we could not put on the a/c with that type. We boondock other wise so the a/c doesn’t matter otherwise.

    • @BothellTim
      @BothellTim  2 ปีที่แล้ว +1

      Thanks for the insight on the dog bone power extension.

  • @dadthejedi
    @dadthejedi ปีที่แล้ว +1

    Who is David?

  • @gary-fp8rw
    @gary-fp8rw 3 ปีที่แล้ว

    Very good video. Thank you.

  • @jannwebb
    @jannwebb 3 ปีที่แล้ว

    Very helpful. Thanks!

  • @johnryle6917
    @johnryle6917 2 ปีที่แล้ว

    Good video

  • @murphy7335
    @murphy7335 3 ปีที่แล้ว +2

    Are you using those stabilisers to level the trailer? Or will you have levelling ramps to do that?

    • @BothellTim
      @BothellTim  2 ปีที่แล้ว

      I use both methods. If the ground is only slightly tilted then I use the stabilisers to level the trailer front to back and side to side. If the ground is quite slanted, then I back one of the trailer tires onto leveling blocks and finish leveling with the stabilisers.

    • @murphy7335
      @murphy7335 2 ปีที่แล้ว

      @@BothellTim Gotcha - never thought to use the stabilisers for levelling before as the owner's manual said not to - but I think you're on the money there with using them if there's only a slight tilt - surely wouldn't hurt

    • @karynpazandak6579
      @karynpazandak6579 5 หลายเดือนก่อน

      @@BothellTim I just got my Scout lite. I like stabilizer idea. . Cant you tell me which one you ordered and any other inf9 for mechanic?

  • @mauriciocastro5080
    @mauriciocastro5080 2 ปีที่แล้ว +4

    I have enough fluff in my bottom….😂