Hi, just fitted my upper engine bars, arrived today from Touratech with no fitting instructions, this video was a god send and a massive help, so for that I’d like to say a HUGE thank you 👍👍
Just had these fitted to my Exclusive by the Motorrad tekkies before new bike pick up. They look the business and compliment the lower engine crash bars. Nice easy to follow comprehensive video👍
If you have BMW engine crash bars you will need 2 x 40MM M8 bolts NOT the 30MM M8 that this Video says, because I just found that out .....30mm is to short..... otherwise its easy to fit and looks good.
Looks good but have a question. When I need to put some antifreeze in the overflow bottle, can I remove the side panel without taking the crash bar off?
The bar does have to be removed to take the side panel off but all the subframe brackets stay in place. The bar comes off with only 3 bolts per side so it's very quick. That said, we have never had to add coolant to an R1250GS.
Very encouraging video to buy online and assemble it by oneself. Does this fit if you have a BMW lower crash bar which was installed by the BMW shop in the first place?
Thanks for the question. Yes, these upper bars will fit great on an R1250GS with the BMW lower crash bars installed. Check the product page for more info here: touratech-usa.com/store/Upper-Crash-Bars-BMW-R1250GS
@@TouratechUSA Thanks for your reply but I purchased and installed both upper and lower crash bars from Touratech. Though I was unable to get all parts align under the beak for the fairing guards. No matter how many times I tried the alignment of the left, right and centre piece did not look smooth. Guess there is a design issue? Now I am awaiting delivery of the steel cylinder guards as well- hopefully it will fit in clean
I'm not sure what you mean by "did not look smooth" but if there is a fit issue please contact us directly by phone or email rather than TH-cam and we will help you however we can.
@@TouratechUSA thanks! Sure, I will share some pics. Just received the cylinder guards as well, will install and share the pictures of what I meant by ‘did not look smooth’ Cheers
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
Hi, just fitted my upper engine bars, arrived today from Touratech with no fitting instructions, this video was a god send and a massive help, so for that I’d like to say a HUGE thank you 👍👍
Just had these fitted to my Exclusive by the Motorrad tekkies before new bike pick up. They look the business and compliment the lower engine crash bars. Nice easy to follow comprehensive video👍
Just fitted the lower bars, after seeing this I’m going to have to buy the upper bars . Lowers where so easy to fit and look great .
FYI - For the 2022 BMW R1250GS, there are seven (7) bolts for the beak.
Bought 👍🏼 fitted took me one hour including taking off the bodywork again because I forgot to tighten the brackets under the front 🙈
Can i remove the side plastic parts with the bmw logo without removing the crash bars ?
Not really. It's very easy to pull the three bolts first to remove the bar from the side you want to work on.
I think you gonna take my money gentlemen... looking good and doesn't hide the emblem...so yeah...😁
it is fit for the r1200gs 2018... i know touratech made for r1200gs 2018... but i like more this fitting (r1250gs) than the r1200gs
If you have BMW engine crash bars you will need 2 x 40MM M8 bolts NOT the 30MM M8 that this Video says, because I just found that out .....30mm is to short..... otherwise its easy to fit and looks good.
Thanks for the feedback. I believe there were some updates to the hardware kit after we made this video.
Looks good but have a question. When I need to put some antifreeze in the overflow bottle, can I remove the side panel without taking the crash bar off?
The bar does have to be removed to take the side panel off but all the subframe brackets stay in place. The bar comes off with only 3 bolts per side so it's very quick. That said, we have never had to add coolant to an R1250GS.
Very encouraging video to buy online and assemble it by oneself. Does this fit if you have a BMW lower crash bar which was installed by the BMW shop in the first place?
Thanks for the question. Yes, these upper bars will fit great on an R1250GS with the BMW lower crash bars installed. Check the product page for more info here: touratech-usa.com/store/Upper-Crash-Bars-BMW-R1250GS
Hi, is this compatible with BMW OEM lower crash bars?
Yes they are.
@@TouratechUSA Thanks for your reply but I purchased and installed both upper and lower crash bars from Touratech. Though I was unable to get all parts align under the beak for the fairing guards. No matter how many times I tried the alignment of the left, right and centre piece did not look smooth. Guess there is a design issue? Now I am awaiting delivery of the steel cylinder guards as well- hopefully it will fit in clean
I'm not sure what you mean by "did not look smooth" but if there is a fit issue please contact us directly by phone or email rather than TH-cam and we will help you however we can.
@@TouratechUSA thanks! Sure, I will share some pics. Just received the cylinder guards as well, will install and share the pictures of what I meant by ‘did not look smooth’
Cheers
Is it possible to mount it with SW Motech lower crash bars ?
We haven't tested with those bars, only the BMW factory and Touratech lower bars.
Question: If you purchase upper and lower bars, can you install both at the same time to save some screwing?
They share one bolt on each side so it's a bit quicker, but not that significant. Cheers!
@@TouratechUSA Is there one you'd do first then?
Très beau 👍👍👍