I can believe that launch because merc 400r’s have amazed me with their torque. A 60-80 mph pull on a 39 seahunter with quads threw me back. I’ve never felt that trotted response from those kind of speeds
I run just shy of 40 knots in my 50 tiller on the rev limiter, need to jump up a pitch or two, I think I would be very close to your 100 with a different prop. Nice boat !
Try out some different pitches and I'm sure you would be happy! Just don't skip too much. the difference in mine btwn 25, 26 and 27 was huge. Those were all 3 blade Yamahas. I tried a four blade25 Merc racer solid hub on my Vmax and could barely get on plane and it sucked so much air I couldn't hit 50MPH. Kept blowing out and over revving.
@@donerightthefirsttimellc3343 I have played with a few props, currently have three. Two alloy and one stainless. Massive difference for me was setting up engine height correctly. I've seen so many dealers just bolt outboards on with no care for setting the height correctly.
Took twice the boat with twice the power to run you down, and it took a while to do it. Great horsepower to dollar fun factor ratio with that tiller boat :-)
4:44 love that av plate completely dry and u almost can see the propeller half out of water. When I run my boat flat out and trim out. Can see the prop its fucking sick. Can only be done in smooth water tho
im embarassed to say i didn't know adaptive/automatic trim was a thing, and i rebuild outboard for a living! not in warranty though, so these are brand new still. incredible tech.
@@johnbumpus7138and now evinrude is gone….. we need to support companies that actually do R&D and stop letting them go by the wayside for lessor companies to do well…..
So that’s around 49mph. I had a Grady White cuddy cabin like this boat with a 175hp Johnson 1996’ year. It would go 51mph and the boat was built like a tank. Did 48mph after I painted the bottom, one of the best made boats on earth. The wiring in it was perfect, everything heat shrink and it looked like a work of art under the console. Never had a light go out or anything electrical and it lived in salt water 24/7. Never had a engine issue either come to think of it... That tiller looks like a blast as I can only get 35mph out of my tiller (30 hp Johnson) that’s 56km/h. Good video either way not sure about having a engine trim for me.
We used to run a 50hp outboard on a little dinghy - wakeboard , waterski and some very scary moments if the shop got up. Had to weight down the bow to avoid flying away
I would love to give you a run with my 77 StarCraft Tristar, she is packing heat, 115 hp Mercury 2 stroke. We would just laugh & laugh over some beers. 😁
Two good well powered boats . I call bullshit on the noise difference between them though . The tiller is screaming and meanwhile it's quiet as a mouse on the other
Oops.. at first glance I though those boats were at 75 - 80 MPH.. not KPH... I was thinking damn... those boats are hauling some serious ass across the water.
Have a 2018 quicksilver 505 Cabin with a 100 hp command thrust goes 33-34 knots flat out top speed. But goes from dead still to into planing in like 3 seconds Its a pretty blunt hull too
What does one up and two up mean ? .... I want to overpower a tinny because I fish and dive and that's it. Wanna be quick. Was thinking 50 HP on a 4.5 tinny. Probly a stabicraft?
If you are not hitting the rev limiter, then you are not at peak speed yet. Lift the motor few cm's and test again till you hit peak rpm and still suck water!
Both fast boats for their class/type. But really, a glass boat is always going to be faster due to the shape of the hull. The tinnys don’t seem to benefit from more power like the glass boats do. Other than keeping the speed while carrying more load.
Best Mercury advertisement I’ve seen....
So Awesome .The tiller on a 100 hp looked smooth and not to hard to turn.Bad ass Mercury outboards technology.So quite too .
He kept saying "68k" and I really thought he was talking about knots..lmao
Thought the same thing i was like dudes doing almost a hundo with a tiller😂
I can believe that launch because merc 400r’s have amazed me with their torque. A 60-80 mph pull on a 39 seahunter with quads threw me back. I’ve never felt that trotted response from those kind of speeds
Habe es sehr genossen. Ein großartiges Video. 👍🏼
Lol. He’s proud of that sucker!!
Don’t blame him. That’s the best way to run them.
All good fun 🤩
A motor that big on an open boat seems so scary but fun
This guy looked like he was having fun ripping it up in his tiller! lol
And i thought i was a big kid, love ya work guys *:P*
Love my 1448 tinny with omc 25hp but you guys take it to a whole new level! Stay safe out there!
Absolutely great brotha ! Love the Tilly
Wow! That's cool! Greetings from Cape Coral, Florida
I caught myself smiling like a little kid watching this😄
I know what boat I’d want to be in when the weather turned nasty
Awesome!! Love the sounds out those motors.. that tiller is bloody fast man and that 200 is a beast !! Sounds sweet !!
I loved the 1 finger salute you gave, some say disrespectful, I say CLASS.
would do a short video on your tinny (dinghy). just whats on it, size, price, etc. ???
love those new mercs. water looks beautiful. I saw that nitrous bottle under your seat.
Awesome video. What kinda hull are you running on the tiller mate
I run just shy of 40 knots in my 50 tiller on the rev limiter, need to jump up a pitch or two, I think I would be very close to your 100 with a different prop. Nice boat !
Try out some different pitches and I'm sure you would be happy! Just don't skip too much. the difference in mine btwn 25, 26 and 27 was huge. Those were all 3 blade Yamahas. I tried a four blade25 Merc racer solid hub on my Vmax and could barely get on plane and it sucked so much air I couldn't hit 50MPH. Kept blowing out and over revving.
@@donerightthefirsttimellc3343 I have played with a few props, currently have three. Two alloy and one stainless. Massive difference for me was setting up engine height correctly. I've seen so many dealers just bolt outboards on with no care for setting the height correctly.
What a blast. Looks like you had fun making that video mate.
BOAT LIFE. BE IN IT. Words of wisdom brother.
Guys having so much fun
Took twice the boat with twice the power to run you down, and it took a while to do it. Great horsepower to dollar fun factor ratio with that tiller boat :-)
4:44 love that av plate completely dry and u almost can see the propeller half out of water. When I run my boat flat out and trim out. Can see the prop its fucking sick. Can only be done in smooth water tho
this makes me excite picked up a basic early 70s starcraft alum 16ft with an early 2000's 2 stroke 125 merc. cant wait
That aint livin, Josh. This is livin!
That tiller is sweeeeeeet!!!!
You men are have lots of fun. Be careful and always wear a life Vest.
That’s some serious stuff
For a tiller
You’re going to need seat belt.
I think he's in Australia right. They have great motorsports sensibility. But seat belt just in case.
im embarassed to say i didn't know adaptive/automatic trim was a thing, and i rebuild outboard for a living! not in warranty though, so these are brand new still. incredible tech.
Evinrude actually introduced this technology in 2014 with their G2 Etec motors
@@johnbumpus7138and now evinrude is gone….. we need to support companies that actually do R&D and stop letting them go by the wayside for lessor companies to do well…..
I’m running 115 Pro hydraulic Tiller on a 4.6 Qwintrex 80 Kl at 6300 rpm
So that’s around 49mph. I had a Grady White cuddy cabin like this boat with a 175hp Johnson 1996’ year. It would go 51mph and the boat was built like a tank. Did 48mph after I painted the bottom, one of the best made boats on earth. The wiring in it was perfect, everything heat shrink and it looked like a work of art under the console. Never had a light go out or anything electrical and it lived in salt water 24/7. Never had a engine issue either come to think of it... That tiller looks like a blast as I can only get 35mph out of my tiller (30 hp Johnson) that’s 56km/h. Good video either way not sure about having a engine trim for me.
I have a Grady white marlin walk around with twin Evinrude 225 Etec HO’s does 61 @ 5950rpm
And it’s a solid heavy boat I love Gradys
Love it. Great vid
Merc’s out of the box are still awesome.
Merc’s our of the race shop are Assassins
How's fuel consumption with the Merc 4 stroke.?
Lovely and quiet and fucking wicked.
Dude I'm sold I'll take one exactly like that
just wow.the more i watched the more i was amazed at the speed the pick up!!!!
I have the same engine (100hp merc). What speed do you reach with ?
He said in the video multiple times🤦🏻♂️
@@zach5154 I am french I don't undersant well what he says in the video....I would have been faster to tell me.....
75 km/h
@@MrMijnaccount1 Thank you !
Love you guys
That looks so fun.
We used to run a 50hp outboard on a little dinghy - wakeboard , waterski and some very scary moments if the shop got up. Had to weight down the bow to avoid flying away
You didn't touch the trim for how many days????
Yea but how would it do against my 6 HP hangkai!
oh shit son. no comparison. Those Hangkai are top of the line speed demons! eat a 200hp merc for lunch!
I don’t know. My 6 Johnson might have ya.
4:45-5:13 is reminiscent of catching toe cutter?
What prop are you running on your tiller..?
& its a nice size boat for the 100hp mercury
I want a tiller outboard for my 16' bay boat.
Nice. Out pontoon boats go that fast.
What prop is the 200 running? Similar setup,
I want that prop lol
Not sure sorry mate. Was a loan boat.
Could have a look for you it’s clearly marked on the prop.
@@craigkaschan4822 no rush boat about to come out for the winter. Thank you
I would love to give you a run with my 77 StarCraft Tristar, she is packing heat, 115 hp Mercury 2 stroke. We would just laugh & laugh over some beers. 😁
Best part of video was at the 5min part
..WHEN THAT GREAT WHITE SHARK WAS HONEING IN ON THE TUNA A HEAD ..G0 THE TILERSTEARS🤣🤣
everybody gangsta till the kayaker with huge biceps pulls up
How do you like your Mercury 100 HP I have been looking at them?
I have this engine on my boat. It's a very nice one, very quiet and fuel efficient
“Only the top offshore machines with twin 200” meanwhile in South Florida everyone’s running midnight Xpress with six 450R’s
Come to south Florida we got 2000+ hp center consoles 😂
and our tinnies go faster just like our muscle cars lol. Money ain nothing without will.
What's the price of the big Merc out the door???
For sake $11k if you want it :)
But new they were around 17
What the hells that guy doing? Living his best life. That's he's doing.
Two good well powered boats . I call bullshit on the noise difference between them though . The tiller is screaming and meanwhile it's quiet as a mouse on the other
Tiller?Crazy😱😱😱
How do you rate the haines hunter? Worth the money? Or would you prefer another boat for that money?
They are a good boat. Good layout and ride. Having said that we have an edencraft
Mercury 4 strokes are nice, but hard to beat the Suzuki DF series.
Oops.. at first glance I though those boats were at 75 - 80 MPH.. not KPH... I was thinking damn... those boats are hauling some serious ass across the water.
KM/h has been standard around the world only for about 100 years now.
All the more impressive given the big Merc had to push a heavier boat and twice the aero drag
I didn't know trimming your motor was a thing !
Brendan What’s it like against the 200 Etec
No idea
Have a 2018 quicksilver 505 Cabin with a 100 hp command thrust goes 33-34 knots flat out top speed. But goes from dead still to into planing in like 3 seconds
Its a pretty blunt hull too
That's the kinda Tilley I need.
What does one up and two up mean ? .... I want to overpower a tinny because I fish and dive and that's it. Wanna be quick. Was thinking 50 HP on a 4.5 tinny. Probly a stabicraft?
Number of passengers?
What are the specs on the tinny hull?
She’s a 495 anglapro.
@@YouFishTV thanks mate. Do you have a video on it mate. Such a great rig.
You guys need to come to the us. 300 single is about the smallest you’d see
Lol 300 single costs the same to start up as my whole trip with my 50 lol
If you are not hitting the rev limiter, then you are not at peak speed yet. Lift the motor few cm's and test again till you hit peak rpm and still suck water!
Come on mate trim that tiller up just a little more have it cavin just a little bit then you'll be walking the old dog
Ummm wuut ?? What does this mean ?
lmao best comment yet. Us Aussies speak our own language bahahhaha
I want that tiller and boat!
Oh that wasn't mph was it....
My mates 720 cruisecraft does 44knts ??
ye but what does it do when the boat is launched and taken off the trailer // cheers Tim
ive got a proline 221 (23ft) with a merc 200hp saltwater series and i can hit about 46 to 48mph
Try a 200 hp evinrude ocean runner
I totally believe this guy.
Witch one of you put the mark on the mark on the wrong side? Red right returning ;)
MERCURY é MERCURY e o melhor motor da história um MERCURY em uma MARINE MÁX E um sonho muito muito linda top show de bola um sonho
If I get a 100hp tiller dinghy do I HAVE to fish?
Both fast boats for their class/type. But really, a glass boat is always going to be faster due to the shape of the hull.
The tinnys don’t seem to benefit from more power like the glass boats do. Other than keeping the speed while carrying more load.
True but alloy weighs less
I thought max horse for a 595 was 175??
If there are two things with a motor on them, you know we have to race them.
Must have been passed by a Yalta?...
U have to upgrade my 9.9
I want to find ey boat whit dose Mercury’s to race whit my 300’s pro max
Coolio I got a tohatsu 30hp on my 12 foot tinny
I have always had great luck with my Mercs!
So you mean.. a motor with 2xhp is faster? Bruh... 🤯
Thats not how boating works
So.... I was thinking MPh the hole time haha like wtf!?
Whole time ffs.
Considering my 95 model 50hp yamaha would push a 14 swiftcraft to 70kmh that's not that spectacular
Coronavirus fun rock on guys
Where is the 100hp Mercury tiller/ They don't make a 100hp four stroke tiller
Super
Quero ver fazer com evinrude Etec?
Bad asss
Haha this is gold, difficult when researching engines to know what they'd actually do on a hull goin' full tit, cheers for making a vid of it!
maybe in futur boat i will get best fast and strong motor on my dream boat