Great video. Didn't know about the change until recently. I was listening to you at the beginning and then saw the sign and was like oh, thats why he sounds like a Long Islander. I'm a NC native, but married my East Meadow native wife 26 years ago. We live in TN, but just had one of her heavy NY accent brothers visit recently from Long Island. Great info here. Thank you.
Hi Gary, I have a 2023 3500HD. Is that the software that I would need to program in like the Navigation and back up cameras, power folding mirros, etc? I know the radio and ecus have everyrhing integrated, just not unlocked from the factory unless you pay for the higher trim or options. Looking to upgrade some of the features on mine
Hey man, urgent! Om trying to program my chevrolet orlando 2.0 163hp from korea origin, It dont recognise and gives me an error "e6220 - no vehicle authorization" What to do)
@@GaryFerraro nah, i purchased sps2 prog for korea and now connecting But i have changed bcm, ecm , immo + key are from another car Only cluster is left from previous setup I have bcm pin, how to adapt immo and sync modules?
I have a few quesitons.... so i know you have to buy the mdi2 device and pay the $45 for the vin. but is there anything else you have to pay for? do you have to pay the $4000 for techline connect or do they let you only use that for the sp s2 programming? also if i had 3 different ecms that i wanted to program all the same vin and calibration to would i be able to do that off 1 vin lisences or would i need more?
You purchase time from the GM website, the 45 per vin with 24 month access to the vin. Download Tech-connect. Do AC Delco TDS that should get you to were you want to be. Also may have to load the software to your MDI or J2534 Pass through connector
GM is definitely one of the easiest makes to program. I love the fact there's a site for verifying calibrations.... for FREE, although it's not a horrible cost for a subscription. I've been watching.. or rather, listening to your videos without commenting lately. Been so busy. I sent a Christmas card. . Hopefully you receive it in time. Christmas kind of sped up on me 😅 Stay well my friend. God bless & Merry Christmas 🎅 🎄 🤶 🎁 ❄ ☃️
Tech connect you download, then install software for your pass through connector, and purchase time, 50.00 per car for 24 months. Or you can always have someone program for you
@@GaryFerraro ok copy yes I have the Wi-Fi adapter for diag/service and J2534 for programming. I will call you tomorrow about possibility of shipping a 6HP21 valve body for overhaul.
@@GaryFerraroHello Gary, I am new to your channel but I am wondering if it’s possible for me to reach out to you ? I just recently did a v6 to v8 swap on my 2012 Chevrolet Camaro and now i had to buy a mdi 2 programmer because my car won’t start due to anti theft, but I do not know how to use it
Best part of IT, Bar Tending. Thanks for the content, Gary.
Great video. Didn't know about the change until recently. I was listening to you at the beginning and then saw the sign and was like oh, thats why he sounds like a Long Islander. I'm a NC native, but married my East Meadow native wife 26 years ago. We live in TN, but just had one of her heavy NY accent brothers visit recently from Long Island. Great info here. Thank you.
East Meadow just a couple of towns away, thanks for sharing
very good explanation Gary, thank you for all your time
Thanks for the information, helped alot
Well done Gary ... You re build the transmission and the computer program it the job is complete... man & computer working together
Thanks for watching
What kind of programmer tool do you use? I have problem with glow plug module my 2019 gmc Duramax
These are great videos! Always interested to see the PC/Coding parts. Is this something that you guys have to do daily or just an every now & then?
Not Daily maybe once a week
Hi Gary, I have a 2023 3500HD. Is that the software that I would need to program in like the Navigation and back up cameras, power folding mirros, etc? I know the radio and ecus have everyrhing integrated, just not unlocked from the factory unless you pay for the higher trim or options. Looking to upgrade some of the features on mine
hi gary please i have chevrolet volt 2012 , ichanged tcm for transmission , how can i programe it
Either find a programmer or bring it to the dealer
Hey man, urgent!
Om trying to program my chevrolet orlando 2.0 163hp from korea origin,
It dont recognise and gives me an error "e6220 - no vehicle authorization"
What to do)
probably because of the vin number. What is this car the same as here in the states
@@GaryFerrarowhat should i do on this case? Need very urgent
@@wikiliks1187 only thing i can think of is to enter the information manually from another car and see what happens
@@GaryFerraro nah, i purchased sps2 prog for korea and now connecting
But i have changed bcm, ecm , immo + key are from another car
Only cluster is left from previous setup
I have bcm pin, how to adapt immo and sync modules?
@@wikiliks1187 That i'm not sure, sps2 may walk you through if it's an option
I have a few quesitons.... so i know you have to buy the mdi2 device and pay the $45 for the vin. but is there anything else you have to pay for? do you have to pay the $4000 for techline connect or do they let you only use that for the sp s2 programming?
also if i had 3 different ecms that i wanted to program all the same vin and calibration to would i be able to do that off 1 vin lisences or would i need more?
You purchase time from the GM website, the 45 per vin with 24 month access to the vin. Download Tech-connect. Do AC Delco TDS that should get you to were you want to be. Also may have to load the software to your MDI or J2534 Pass through connector
What hardware interface did you use to communicate with the vehicle
I have the interface from Ease Diagnostics, the company was sold but they are all made by Drew technologies
GM is definitely one of the easiest makes to program. I love the fact there's a site for verifying calibrations.... for FREE, although it's not a horrible cost for a subscription.
I've been watching.. or rather, listening to your videos without commenting lately. Been so busy. I sent a Christmas card. . Hopefully you receive it in time. Christmas kind of sped up on me 😅 Stay well my friend. God bless & Merry Christmas 🎅 🎄 🤶 🎁 ❄ ☃️
I figured you were busy, same here, shop is packed. Happy and safe Holidays to you and your family
so do you have to spend the 4000$ on the tech like connect or is there a way around that?
Tech connect you download, then install software for your pass through connector, and purchase time, 50.00 per car for 24 months. Or you can always have someone program for you
Is it possible to use sps2 without the techline connect subscription?
no, need to purchase time, 40.00 pre car
@@GaryFerraro Thank you
Hi I have problem error message there was an issue retrieving VIN slot status
with the key on should be able to pull the vin number
do you have any videos to program engine computer?? replace and reprogram?
I do not, sorry
Hello Brother. you activate the gds gm software license techline
i purchase time to program
Do I have to get windows 11 pro or will windows 11 home work ?
when you look on the GM website under system requirements it says windows 10 pro , not sure home will work
What pass through do you use? Just a scanner with J2534?
I bought the Ease diagnostic pass thru many years ago, that and my laptop
@@GaryFerraro thanks for the reply. Looking for one that isn’t GM only that isn’t the SnapOn Versus ($9000)
Undertake online programming of GM vehicle series, remote number input of offline programming, etc
thanks
Hi Gary, is there a reason your Autel/Snap-On could not perform that programming? Was the TCM replaced? I don't know GM software just BMW.
yes, new tcm, had to purchase time from gm, need the pass thru connector to perform this the J2534
@@GaryFerraro ok copy yes I have the Wi-Fi adapter for diag/service and J2534 for programming. I will call you tomorrow about possibility of shipping a 6HP21 valve body for overhaul.
@@igotaction ok, if possible call Tuesday, Mondays are always crazy
@@GaryFerraro yes sir will do, tomorrow I can get my Transtar account set up😉
@@GaryFerraroHello Gary, I am new to your channel but I am wondering if it’s possible for me to reach out to you ? I just recently did a v6 to v8 swap on my 2012 Chevrolet Camaro and now i had to buy a mdi 2 programmer because my car won’t start due to anti theft, but I do not know how to use it
Dtc…. My ocd was triggered lol