LED Motion Sensor | LED Light Kits | Inspired LED
ฝัง
- เผยแพร่เมื่อ 21 มิ.ย. 2015
- Inspired LED's Motion Sensor is a convenient accessory which easily combines with Inspired LED flex strips and panels to create the perfect low-voltage lighting system for any home or business. Ideal for cabinets, closets, and drawers, this unique device allows LEDs to be turned on and off in response to the motion of opening or closing of a door.
Purchase it now here! www.inspiredled.com/motion-sensor
Contact us with any additional questions or visit our website!
Website: www.inspiredled.com
Email: orders@inspiredled.com
Phone: 480-941-4286 - วิทยาศาสตร์และเทคโนโลยี
![[TH] VCT Masters Shanghai Playoffs DAY 1 // 100T vs FUT | FNC vs GEN](http://i.ytimg.com/vi/erQ7pGChzxA/mqdefault.jpg)
Would it have been better for a pressure switch like a refrigerator?
How can I put two 12 v motion sensors in parallel. Like one up stairs and other down stairs, with the same light.
Thank you.
Hi so im using an athom led controller will this sensor work with the athom controller
Can this Motion Sensor be used outside for Low Voltage Landscape lights?
Thanks, can I wire this straight into a 12v alarm? As in connecting it to a car horn .. So the circuit would be, car battery - motion switch - car horn..
I just purchased 4 of these followed instructions, they didn’t work ???????
I would like to put led strips on our stairs can I place one of these at each end of the strip?
Thanks!
Where are you bought LED strip with DC connector?
Nice
Inspired LED sensor in PIR or microwave. If it is PIR it will have issue with latency in future.
Sir i want connect 220 volt motion sensor withought tansfarmer and bettry
Hi, to install multiple different strips of LED's, can one just twist all the positive leads of the strips, plug that into the +output, and twist all the negative leads and plug that into the -output?
Brennan as long as the lead cable is small enough to wire multiple leads into the terminal while still making good contact, that is acceptable. Please note that the Motion sensor has a power limit of 6amps, so the flexible strip load will need to be lower than that.
Got it, thank you for the reply.
Dear Inspired, Can an incandescent or Halogen lamp be used instead of an LED light strip, please?
Thank you.
As long as it’s DC and within 12-24v ure good
can this be used for outdoors? in rain? thinking of using this for footbridges
Unfortunately, our Motion Sensor is manufactured for indoor systems only. The exposed connection points won't hold up when in contact with outdoor elements like rain, snow, dust, and dirt. If you have any other questions in regards to your outdoor design feel free to call us directly!
I need help! I have never worked with this sensors and I have been cautious in following the directions. I tell you; I bought four of these sensors and made the connection as suggested in the four separately, but the lights never go out. Could you tell me what I am doing wrong, since I think that maybe one of the sensors came wrong but the all four of them did not believe.Aid will be appreciated
Hi Angel. We would be more than happy to help troubleshoot your system. If you purchased the Motion Sensor and associated accessories from us make sure to have your order number available. However, if you purchased products from another manufacturer we will do our best to assist. Give us a call at your convenience and anyone on our tech support staff will be able to walk you through some suggestions. We look forward to speaking with you, 480-941-4286.
OK I'll Call Thank's
The wire can get hack by circular emf
Can I use a 120v PRI and then connect the led transformer?
Which PRI were you looking at? I'm not quite sure how a 120V PRI would fit into this system.
Inspired LED I want to do the same project of your video but I can't find any sensor for led here in my country. I just can find a variety of sensors for bulbs that we all know 120 volts.
So, my logic tells me that it will work if I use it before the wall adapter. Don't you think so?
Do you have 240V or 120V?
The small plug in power supply (shown in the video at 0:58) can be used with 110-240V. You would just need an outlet adapter, if the prong plug does not work. This will convert from 110-240V to 12V to use with the 12V LED lights.
Or were you looking for something more like this? www.zoro.com/hubbell-wiring-device-kellems-occupancy-sensor-pir-1200-sq-ft-white-ws2000nw/i/G8492976/
Sorry to make this confusing I'm just trying to understand what specific product you are referring to. Could you add a link for reference?
HI , Does it work, If only something pass through the motion sensor or it works for sounds in home ?
Can you explain it pls , pls
Hello! The Motion Sensor detect only motion, not sound. Thank you! - InspiredLED
@@Inspiredled thanks very much
Any idea to decrease the sensitivity? Or maybe delay time to sec. not mins please?
Hi Diqi! Typically you will want to point the top of the viewing eye in the direction where motion needs to be detected. If you want to make the sensor less sensitive, point the side of the viewing eye towards the location where motion should be detected and the top of the viewing eye slightly away. Adjusting the 60 degree range will assist making the sensor less sensitive. For additional questions feel free to call us at 480-941-4286.
Hi , Is there a sensivity adjustment in the motion sensor
Hi Sonali! The Motion Sensor does not have a sensitivity dial. -InspiredLED
how does it work in the dark
Tyler, it is a infrared sensor, so it will detect heat (body heat) when it is dark.
Is This motion sensor working at night or daytime . can I use it for both times? Pls explain it pls ,pls
Hello! Our Motion Sensor can be used during the day and at night. Typically, this product is installed in cabinets, closets, and drawers. Let us know if you have any further questions! - InspiredLED
@@Inspiredled thanks very much
Are there any outlet boxes - faceplates to make this more aesthetically pleasing in an open area?
Hi Sandra. Unfortunately, we do not have a faceplate for the Motion Sensor; however, you are more than welcome to install it in a small junction box. The only component that needs to be exposed is the clear globe on the top of the product. The plastic black housing can be concealed completely. Let us know if you have any additional questions. -Inspired LED
Sir, I am interested to purchase this item i.e. LED motion sensor which you have shonw in the TH-cam video. Please send me the name of supplier so as to go further. Thanks
I have pir Based type call 8884570727
This is not working through glass which mean it can be blind by miu or epsilon
Will the sensor penetrate 2mm clear acrylic?
Hi Shaan! The Motion Sensor will detect any motion, so as long as the acrylic is clear, or semi-clear, it will respond. Thank you! -Inspired LED
Please sensor milega bataye
Is this sensor working for only human bodys?
Hi Dilriksha! The Motion Sensor does not only detect human bodies. It will pick up any motion, whether it be a cat or something falling. -Inspired LED
on 5v ???????
This is shown with a 12V system. This specific product works with 12-24V products.
I need 110v
Do we need 2 female leads to connect the LED panels? Or else can't we Directly connect the LED panel without female leads
Hi Dilruksha! Our Power Supplies are manufactured with a male connector and our Interconnect Cables are also manufactured with a male connector. For this reason, we add female pigtails to the Motion Sensor for a simple Plug-N-Play System. We hope that answered your question! - InspiredLED
@@Inspiredled tanks very much
I really like this project but paying $20 just for motion sensor is a lot and can buy a full light with motion sensor for less,, thanks thought
can you please link or name this light you are mentioning? im searching for a uni project
@@user-nk4jd1sj5z just type on Amazon *motion sensor lights* indoor or outdoor mate there are many types and designs.
How can I put two 12 v motion sensors in parallel. Like one up stairs and other down stairs, with the same light.