I had a “professional” install The super lock lower arms and the upper control arms. He fucked it up something fierce, and I find myself installing everything myself after a complete tear down. For anybody who’s listening if you’re gonna pay someone to do it make sure they know what’s up. On a positive note, I installed GKtech subframe collars today 🤙
ProTip: Take painters tape, and put a strip on each bolt you take out with the number of that bolt that is found on the FSM or their instructions. It makes it easier if you ever have to put the stock bolts back in, or if you are just removing the manifold for maintenance reasons. Also: If you disconnect the TB, make sure to do the throttle body relearn procedure or take off the battery for a couple hours so the ECU can relearn. :D
I've got the liquid type gasket in a squeeze tube.. It might not be able to do what your rubber seals can do.. but that's all i have to work with right now, I might get back to you on that...
I’ve heard ppl say the spacer on the rev up is a loss in power? Anyone else hear this? I’ve heard unless you are adding the mrev2 with it it’s useless… I have a spacer… do I just not put it on?? Getting dyno tuned for bolt ons soon.. so I Wana make the best of it
@@tomr1107 it increases the volume of the plenum… if the computer compensates properly then yes there has to be power gains… look at my videos.. natural aspirated vq before the tune making 295wheel hp.. bet now that I’m tuned and have more mods I’ll hit 330wheel
@@Turtlefarm 35 whp from just a plenum spacer is impossible. You will see 10hp at the peak of the power curve around 4.5k-6.5k rpm. You need to remove the cats and get a tune for noticeable gains.
“Why did you get an intake spacer!?”
“Idk, i just really liked the narration for the how-to video!”
It puts me off buying
You caught the rubber oil fill piece in between the two halves of the plenum. Common mistake.
I’ve never laughed so hard for an install video
I had a “professional” install The super lock lower arms and the upper control arms. He fucked it up something fierce, and I find myself installing everything myself after a complete tear down. For anybody who’s listening if you’re gonna pay someone to do it make sure they know what’s up. On a positive note, I installed GKtech subframe collars today 🤙
ProTip:
Take painters tape, and put a strip on each bolt you take out with the number of that bolt that is found on the FSM or their instructions. It makes it easier if you ever have to put the stock bolts back in, or if you are just removing the manifold for maintenance reasons.
Also:
If you disconnect the TB, make sure to do the throttle body relearn procedure or take off the battery for a couple hours so the ECU can relearn. :D
much want. center risers are a dope addition and i really like that y'all provide ALL the bolts/studs
I've got the liquid type gasket in a squeeze tube..
It might not be able to do what your rubber seals can do..
but that's all i have to work with right now,
I might get back to you on that...
yet another day that I comment on a video for a part to a car I don’t have till gktech blocks me
@Romulus III We appreciate you guys nonetheless. MVP's regardless!
You should try putting 3 onion rings on
awesome product, I've been waiting for u guys to make one of these:)
This kit looks more complete than the Z1 kit. sheesh good job guys.
@4:10 what kind of socket is needed to remove the studs?
Probably the best demonstration video I’ve seen of all time
Thank you! We try!
at 4:11 what size did you use to remove studs
YES!!!!! Been hoping you guys would make a plenum spacer!! Next on the order list for Project Zulu for SURE!
holy fuck this video is amazing lmao even has an installation guide in detail!
I’m screaming at the s13 comment 🤣
The strut bar install is different on the g35
I was in the fence on this so thanks for helping out my decision
What a crack up.. 📺 👀 🤣
I’ve heard ppl say the spacer on the rev up is a loss in power? Anyone else hear this? I’ve heard unless you are adding the mrev2 with it it’s useless… I have a spacer… do I just not put it on?? Getting dyno tuned for bolt ons soon.. so I Wana make the best of it
no power gains from this mod.
@@tomr1107 it increases the volume of the plenum… if the computer compensates properly then yes there has to be power gains… look at my videos.. natural aspirated vq before the tune making 295wheel hp.. bet now that I’m tuned and have more mods I’ll hit 330wheel
@@Turtlefarm 35 whp from just a plenum spacer is impossible. You will see 10hp at the peak of the power curve around 4.5k-6.5k rpm. You need to remove the cats and get a tune for noticeable gains.