@NYE store Can you help me where did you put in the Orange and the pink and the grey wire??? I conect my red and black wire but is draining my battery out.....
Sorry late response I hope you got through my video but the pink and gray wire you have to split the skunk wire that's pretty much your kill switch wire almost orange wire goes to your ignition wire you can have to trust for 12 volts when the ignition is turned on with a key I hope the help is by the elaborate more in the video if you keep on following this series.
Unfortunately you do have to connect the red and black wire to a constant power source cuz it needs to monitor even when the ignition is not on so it has to do something but maybe your battery needs to be strong enough for started daily to keep a good charge. I hope this helps for the red and black wire, you can see I tap mine near the all the ignition area but it still has a constant drainage on the power even without the key or anyting being started the alarm on a has still power monitoring the scooter.
Hey if u still have scooter and this problem. ..try this if your brake light is an L.E.D change it to an normal incandescent brake light bulb.....then try your remote start .....that was my problem .....hope it works for you
The black wire in that alarm that goes on the key is positive + when the key is turned on. I thought black was a negative. It's what is called positive output wire. Which powers the lights when the key switch is on. You need to connect the orange wire to the black wire. When the key switch is turned on, the black wire will give positive output to the orange wire for your remote start. The blue wire connects the output of the starter solenoid. So for instance connect the blue wire to the cable in the solenoid that is connected to the starter. Remote start happens when the orange and blue wire circuit are shorted against each other. The black and white wire is your kill switch. The red wire is the positive - to the fuse at the battery or key switch. The green wire is the earth wire basically a ground. The gray wire connects to the black and white wire at the key switch. The pink wire connects to the black and white wire at the CDI box. The pink and gray wire are shorted on the black and white wire to disable the engine when the alarm is engaged.
@abdulmaliksuraj1976 the yellow/green wire goes to the starter solenoid if you have a chinese alarm ....this wire would connect to the blue wire on the alarm for remote start The red wire on the alarm should go to your battery, itis positive. It is hard to tell without being there. The black wire and the brown wire, I'm not sure. One of them will be switched positive on the key switch. This means that when the key switch is on the black or the brown wire should get 12 volt power. When the key is off, you shouldn't have there should not be 12 volts. The leftover wire (black or brown) will be your negative battery.
i have 1 problem whit my alarm is the same alarm my engine is kranking but not start idk why...i have kymco agility 50cc 4t euro 4 2020 i net nelp pls .
@NYE store Can you help me where did you put in the Orange and the pink and the grey wire???
I conect my red and black wire but is draining my battery out.....
Sorry late response I hope you got through my video but the pink and gray wire you have to split the skunk wire that's pretty much your kill switch wire almost orange wire goes to your ignition wire you can have to trust for 12 volts when the ignition is turned on with a key I hope the help is by the elaborate more in the video if you keep on following this series.
Unfortunately you do have to connect the red and black wire to a constant power source cuz it needs to monitor even when the ignition is not on so it has to do something but maybe your battery needs to be strong enough for started daily to keep a good charge. I hope this helps for the red and black wire, you can see I tap mine near the all the ignition area but it still has a constant drainage on the power even without the key or anyting being started the alarm on a has still power monitoring the scooter.
Hey if u still have scooter and this problem. ..try this if your brake light is an L.E.D change it to an normal incandescent brake light bulb.....then try your remote start .....that was my problem .....hope it works for you
Seriously that's what links to it that's crazy I wish I could tried it
When installing an alarm and remote start on my scooter where does the black wire coming out the other side go
That what I want to now
I bought one but I don't now where the other wiring goal is a red and and black one I don't know where it goes black and red
Sorry it's been so long I never did get to work as far as the auto start
Where would the blue wire go for the remote start
I have a problem mines the key doesn’t work when I have the alarm when I take the alarm stays on and I have two black and white wires
I wish these Chinese wiring for standard but they're not sorry forgot the whole thing
The black wire in that alarm that goes on the key is positive + when the key is turned on. I thought black was a negative. It's what is called positive output wire. Which powers the lights when the key switch is on. You need to connect the orange wire to the black wire. When the key switch is turned on, the black wire will give positive output to the orange wire for your remote start. The blue wire connects the output of the starter solenoid. So for instance connect the blue wire to the cable in the solenoid that is connected to the starter. Remote start happens when the orange and blue wire circuit are shorted against each other. The black and white wire is your kill switch. The red wire is the positive - to the fuse at the battery or key switch. The green wire is the earth wire basically a ground. The gray wire connects to the black and white wire at the key switch. The pink wire connects to the black and white wire at the CDI box. The pink and gray wire are shorted on the black and white wire to disable the engine when the alarm is engaged.
hello please I'm trying to connect the alarm to my Yamaha GTR Aero 125 but the wires in the ignition switch is different colors can you please help me
@@Vybzonline what color are the wires?
@@MR.ROB.DA.GOD.Biker-ex Black, Red, Brown with blue stripe and yellow with green stripe
@abdulmaliksuraj1976 the yellow/green wire goes to the starter solenoid if you have a chinese alarm ....this wire would connect to the blue wire on the alarm for remote start The red wire on the alarm should go to your battery, itis positive. It is hard to tell without being there. The black wire and the brown wire, I'm not sure. One of them will be switched positive on the key switch. This means that when the key switch is on the black or the brown wire should get 12 volt power. When the key is off, you shouldn't have there should not be 12 volts. The leftover wire (black or brown) will be your negative battery.
@@MR.ROB.DA.GOD.Biker-ex ok thank you I'll connect and try
sir "How to turn off the alarm when the key is about to start"Your keychain is exactly the same as mine."
i have 1 problem whit my alarm is the same alarm my engine is kranking but not start idk why...i have kymco agility 50cc 4t euro 4 2020 i net nelp pls .
i never did figure out mine to be honest.
hello brother u have wiring diagram for gy6 125cc