Even though there is a "warranty", I had the same problem with LG NOKNOK new value 3500$ . They wanted to replace the door for $650. I fixed it like you in 30 minutes of work thanks to you!
It looks like the same fix holds true 3 years later. I have the same problem. It occurred outta the blue after I fixed the icemaker fan. The new refrigerators are a nightmare to work on. Thanks for taking the time to do this video.
I replaced every board in my refrigerator. I did the same for the seals. I checked the continuity and it was good. (Maybe I did that wrong). I finally went to the top of my fridge and tugged in the thicker wires. The first one had a bit of slack. I was afraid to pull it too much. So I tested the others. They didn’t really give. So I went back to the first one and pulled it. It was broken! I did the hard wire first and that worked. I did the same wiring but the first hole required that I drill through a plastic conduit that surrounds where water and the other wires are. I ran the wire all the way under the door and brought it up through the bottom where the white water tub was. I did this because I have two air ducts at the bottom. It seems to be working! Thank you!!!!!
Excellent job explaining in detail. I have similar issue with only water not dispensing and tech told me that need new door because wire on top of door is ripped which give signal to rear water valve. I am so happy when i see your video. hopefolly i will replace just wire not whole door. Thank for this Video 🙏
All you had to do is cut your original line at the bottom tape the new wire you wanted to use. Pull from the top to pull it through. Save a lot of drill and such.
Greetings and congratulations ..! I am writing to you from Venezuela I have the same refrigerator and that panel or displey does not turn on me ..! Could you explain to me how you disassembled it ... In the video of him you can't see how I can get that water dispenser out ..? Please..! I appreciate the help you can give me ..! Thanks..!
Similar problem broken pink wire and broken white with red wire. That broke inside the door. Pink supplys power other wire on my model communicates to the water valve .
I have same problem. Replace part did not work. So the power is not there. I dont have all the skill to do what you have done for that. I wonder this is defected if many people has the same issue. My Sn is LMXS30776s. I wonder you have the same model.? Thanks for posting the video.
So if you were to cut the wire at the panel and tie a new wire to it wouldn't you be able to pull it up? Just wondering if that would have been easier that your mcguiver way idk I have the same problem so see how it goes in the near future
You think just changing that inlet valves would've fix it. Instead being surgical.. having same issues now with that same fridge. And that plastics bubble is the reservoir where the water is stored
Even though there is a "warranty", I had the same problem with LG NOKNOK new value 3500$ . They wanted to replace the door for $650. I fixed it like you in 30 minutes of work thanks to you!
This guy took a bad situation and did wonders! Better than replacing the door!
It looks like the same fix holds true 3 years later. I have the same problem. It occurred outta the blue after I fixed the icemaker fan. The new refrigerators are a nightmare to work on. Thanks for taking the time to do this video.
Thank you for sharing. This was most helpful as I just encountered the same issue.
anyone under 50 is saying, just buy another refrigerator... I say BOOOO YAHH you are a LG icemaker GOAT!!!
I replaced every board in my refrigerator. I did the same for the seals. I checked the continuity and it was good. (Maybe I did that wrong). I finally went to the top of my fridge and tugged in the thicker wires. The first one had a bit of slack. I was afraid to pull it too much. So I tested the others. They didn’t really give. So I went back to the first one and pulled it. It was broken! I did the hard wire first and that worked. I did the same wiring but the first hole required that I drill through a plastic conduit that surrounds where water and the other wires are. I ran the wire all the way under the door and brought it up through the bottom where the white water tub was. I did this because I have two air ducts at the bottom. It seems to be working! Thank you!!!!!
I have the same LG fridge and had exactly the same problem. All fixed now. Thanks for the excellent video
Great job, very informative, have this same issue with a client that i will be troubleshooting next week, thankyou!
How'd it turn out? Same issue?
Excellent job explaining in detail. I have similar issue with only water not dispensing and tech told me that need new door because wire on top of door is ripped which give signal to rear water valve. I am so happy when i see your video. hopefolly i will replace just wire not whole door. Thank for this Video 🙏
I think I have the issue you had. Ice works, but when I push for water, light does not come on, and no water. How did yours turn out?
All you had to do is cut your original line at the bottom tape the new wire you wanted to use. Pull from the top to pull it through. Save a lot of drill and such.
Wow, that's very cool! I would just run the wire outside the fridge and tape it on.
Thanks, this fixed my fridge. 12v cable broken.
What happens if all the wires that match colors have continuity except the one that doesnt match?
Greetings and congratulations ..!
I am writing to you from Venezuela I have the same refrigerator and that panel or displey does not turn on me ..!
Could you explain to me how you disassembled it ...
In the video of him you can't see how I can get that water dispenser out ..?
Please..!
I appreciate the help you can give me ..!
Thanks..!
Similar problem broken pink wire and broken white with red wire. That broke inside the door. Pink supplys power other wire on my model communicates to the water valve .
Thats an incredible fix right there!!!
I have same problem. Replace part did not work. So the power is not there. I dont have all the skill to do what you have done for that. I wonder this is defected if many people has the same issue. My Sn is LMXS30776s. I wonder you have the same model.? Thanks for posting the video.
You are the man, thanks for the video
So if you were to cut the wire at the panel and tie a new wire to it wouldn't you be able to pull it up? Just wondering if that would have been easier that your mcguiver way idk I have the same problem so see how it goes in the near future
How do you get the door open.
Same fridge but when I push the paddle for ice or water, it dispenses but doesn't stop. I think new paddle but hoe do I replace it?
Super informative! Thank you!
You think just changing that inlet valves would've fix it. Instead being surgical.. having same issues now with that same fridge. And that plastics bubble is the reservoir where the water is stored
You could have soldered the old wire to the new wire and fished it up. Should work.
I unplugged mine for 30 declines and it worked fine afterwards. 👍🏼
Can I get the control board model number please
That damn pink wire 😂!!
You crazier than me
I found out the hard way 😅
Change the door
I shouldn’t try to be fixing my fridge while drunk.