I hope you can also make a video on how you modified this cardputer of yours. Im a bit confuse on the diagram shown on your description specially about the additional battery that you put :)
what is that orange wire that was connected under the GND wire and above G2 wire? its not on the diagram that was shown on the module photo. hope you can reply :)
Hello, thank you for your video and 3d model for a spacer. I dont know if it is possible, i just wonder are there any ways to connect nRF24L01 module to a cardputer, i've tried to find any information about that but unfortunateley couldnt find any. There are ton of information how to connect this module to m5 stick but nothing about cardputer, because they are both using the same chip i assume that there should be some way to do this. That wold be really nice if you have any iffo to share. Thank you
I just entered the hardware hacking era and I'm just a complete noob. I have no idea how I will attach an antenna to my cardputer... guess I gotta study a lil bit
@@rodricbr Here is some more info on what I did. www.reddit.com/r/CardPuter/s/PqvRaAeA27 I would recommend printing one of the spacers i designed instead of doing the way I did as it will be difficult.
Hey Ray, there's the perfect amount of space along the front edge to add a AA battery holder that you could use for 14550 Lion cells 👍 If you wanted it to be temporary, you could attach it with adhesive velcro. I've used it to attach some 18650 battery holders and it works well.
Here is some more info on what I did. www.reddit.com/r/CardPuter/s/PqvRaAeA27 I would recommend printing one of the spacers i designed instead of doing the way I did as it will be difficult.
Hi, I love your videos! Please do a review of the improved cardputer, show the device inside, I think many will find it useful:)
1:36 the motorbike made booting your Cardputer sound extremely impressive lol😂
I hope you can also make a video on how you modified this cardputer of yours. Im a bit confuse on the diagram shown on your description specially about the additional battery that you put :)
Sweet upgrade bud it definitely needs it. 👍🏻
Will there be a full review of how to do it?
Love the video
I had a cool idea add a cc1101 and nrf 24
With multiple anntenas
Greetings, have you found the way to connect nrf 24 to a cardputer?
@@Alex140803 it's on bruce github, you need microsd sniffer and soldering skills
what is that orange wire that was connected under the GND wire and above G2 wire? its not on the diagram that was shown on the module photo. hope you can reply :)
Hi I saw video how its made step by step but cannot find now can you advise?
step by step guide for what?
Hello, thank you for your video and 3d model for a spacer. I dont know if it is possible, i just wonder are there any ways to connect nRF24L01 module to a cardputer, i've tried to find any information about that but unfortunateley couldnt find any. There are ton of information how to connect this module to m5 stick but nothing about cardputer, because they are both using the same chip i assume that there should be some way to do this.
That wold be really nice if you have any iffo to share.
Thank you
I have a link in the description.
Hey, when you boosted the battery, how did you modify the charging circuit?
@@ynfafeusd I just soldered in a battery with higher capacity.
I just entered the hardware hacking era and I'm just a complete noob. I have no idea how I will attach an antenna to my cardputer... guess I gotta study a lil bit
@@rodricbr Here is some more info on what I did.
www.reddit.com/r/CardPuter/s/PqvRaAeA27
I would recommend printing one of the spacers i designed instead of doing the way I did as it will be difficult.
Same here
@@rayj1988 thank you!
Hey Ray, there's the perfect amount of space along the front edge to add a AA battery holder that you could use for 14550 Lion cells 👍
If you wanted it to be temporary, you could attach it with adhesive velcro.
I've used it to attach some 18650 battery holders and it works well.
como consigo ligar apenas o NRF24 no Cardputer
@@evandrovitorino9108 Sorry I don't understand.
@rayj1988 How can I connect only the NRF24 to the Cardputer?
@rayj1988 I made the same connection as the cc1101 and it is not recognizing the nrf24
Can you do a video about the wifi/antana upgrade/how to on the cardputer
Here is some more info on what I did.
www.reddit.com/r/CardPuter/s/PqvRaAeA27
I would recommend printing one of the spacers i designed instead of doing the way I did as it will be difficult.
Cool.
Nicee